Overview of 1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve

1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve is engineered for superior performance in plumbing, индустриален, и търговски приложения. Изработен от безоловно, устойчив на корозия месинг, тези вентили осигуряват дълготрайна издръжливост и надежден контрол на потока на водата, газ, масло, и други течности.

С прецизна обработка и здрава конструкция, нашите месингови вентили осигуряват гладка работа, отлично уплътнение, и устойчивост на високо налягане - което ги прави идеални за жилища, търговски, и индустриални тръбопроводни системи.

Key Features of 1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve

Премиум месингова конструкция – без олово, устойчиви на корозия, и издръжлив

Устойчив на течове дизайн – плътни уплътнения за сигурен контрол на течността

Високо налягане & Температурна устойчивост – Надеждна работа при взискателни условия

Плавна работа – лесни за завъртане дръжки за прецизно регулиране на потока

Разнообразни приложения – Съвместим с вода, газ, масло, и ОВК системи

Множество размери & Опции за свързване – налични в ¼” до 2″ размери (NPT, BSP конци)

(1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve)

Specification of 1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve

This brass non-return valve stops reverse flow in your piping system. It works for pipe sizes from 1/2 инч до 4 инча. That equals DN15 to DN100. The body uses durable brass. This gives good corrosion resistance. The internal mechanism is a swing disc. Fluid pressure opens the disc. Flow moves forward freely. Reverse flow pressure forces the disc shut. This blocks backflow effectively. It protects pumps and equipment.

The valve suits medium temperature applications. It handles liquids or gases up to 120 degrees Celsius. Common uses include water lines, отоплителни системи, and compressed air. It works with oil or gas too. Standard pressure ratings are PN16 and PN25. Choose the rating matching your system pressure. Installation direction is critical. Install it horizontally for best performance. Vertical installation is possible. Ensure flow direction is upward. An arrow on the valve body shows the correct flow path.

Connection types are threaded. Common options are BSPP (parallel) or BSPT (tapered) threads. Confirm the thread type needed for your pipes. The brass body ensures long service life. It resists rust and common water corrosion. The swing disc design minimizes pressure drop. Forward flow encounters little resistance. Поддръжката е проста. Обикновено, no regular upkeep is needed. The valve just works reliably. It provides essential protection against backflow damage. Select the correct size and pressure rating for your specific job. This ensures proper function and system safety.

(1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve)

Applications of 1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve

This brass check valve stops water or fluid from flowing backward. It fits pipe sizes 1/2 инч до 4 инча. That is DN15 to DN100. The valve body is brass. Brass resists rust. It handles medium heat levels well. This valve works in water systems. It works in oil systems. It works with air too.

Use it behind water pumps. It stops water hammer. Water hammer damages pipes. It protects the pump. Install it on hot water heaters. It keeps hot water inside the tank. Cold water won’t flow back. Put it on boiler feed lines. Boilers need constant water flow. The valve ensures one direction only.

Factories need these valves. They connect to hydraulic power units. Hydraulic fluid must flow one way. Backflow ruins pumps. Use it on compressed air lines. Air pressure drops cause problems. The valve prevents air loss. It helps maintain system pressure.

Plumbers use these valves daily. They fit home water lines. They fit commercial buildings too. The swing disc design works simply. Flow pushes the disc open. Reverse flow slams it shut. This action is automatic. No electricity is needed. Инсталирането е лесно. Follow the flow arrow direction. Mount it horizontally or vertically.

The brass construction is durable. It handles pressure well. It handles temperature changes. Expect it to last for years. Maintenance is low. Just check for debris sometimes. Debris can block the disc. This valve is reliable protection. It safeguards your equipment. It prevents messy leaks. It avoids costly downtime. You get peace of mind.

Опаковка и изпращане

Зависи от продуктите и количеството,бихме могли да направим опаковката на навиване,ролки,пакетно опаковане,щайги или кутии,и т.н.

Пратка:По море,ж.п,по въздух или по желание на клиента.

Фирмен профил

Luoyang Datang Energy Tech Co., ООД. е водещ китайски производител, специализиран във висококачествени пластмасови тръби и фитинги. Оборудван с най-съвременни автоматизирани производствени линии и поддържан от екип от 200 професионалисти, предлагаме обширна продуктова линия, включваща над 150 видове пластмасови тръби и фитинги, предназначени за водоснабдителни и дренажни системи, пренос на газ, и системи за подово отопление. Нашите основни продукти включват PVC тръби и фитинги, PE (HDPE) Тръби и фитинги, PPR тръби и фитинги, и PEX тръби за подово отопление.

Ако имате някакви запитвания относно HDPE тръбен монтаж, моля не се колебайте да се свържете с нас!

Тел.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Имейл: sales@pipesandfittings.net

Условия за плащане

T/T,L/C при виждане,Western Union & Paypal,и т.н.

5 FAQs of 1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve

Ето ги 5 common questions about our 1/2″-4″ (DN15~DN100) Brass Non-Return Valve (Brass Check Valve, Brass Swing Check Valve) for medium temperature hydraulic systems:

What’s the flow direction? Install it correctly?
Install the valve so flow moves in the arrow direction marked on the valve body. Flow enters the inlet side. Flow pushes the internal disc open. Reverse flow automatically shuts the valve. Proper direction prevents leaks and damage.

Какъв натиск може да издържи?
These brass valves manage medium pressure levels common in hydraulic lines. Check the exact pressure rating stamped on the valve body. Never exceed the maximum pressure rating. Using it above the rated pressure risks valve failure.

Does it need maintenance?
These valves work reliably without regular maintenance. Debris in the line can sometimes cause problems. If flow stops or the valve leaks, inspect it. Dirt might be blocking the disc. Clean the valve interior. Replace the valve if parts are damaged.

What temperatures work?
The brass body and internal parts handle medium temperature fluids well. Confirm the specific temperature rating listed for the valve model. Very high temperatures can damage seals or warp parts. Ensure your system’s operating temperature stays within the valve’s limits.

What fluids are compatible?
Brass valves work with water, масло, въздух, and many common hydraulic fluids. Avoid using them with salt water, seawater, or highly acidic/corrosive chemicals. Brass can corrode with these fluids. Check the valve specifications for fluid compatibility details. Use the wrong fluid and the valve will deteriorate.

(1/2″-4″ DN15~DN100 Brass Non Return Valve Brass Check Valve Brass Swing Medium Temperature Hydraulic Check Valve)