Introduction of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Taas nga Densidad nga Polyethylene Pipe (PE Pipe) mao ang usa ka lig-on ug flexible thermoplastic piping solusyon kaylap nga gigamit sa industriyal, munisipyo, agrikultural, ug mga aplikasyon sa pagmina. Nailhan tungod sa maayo kaayo nga pagsukol sa kemikal, taas nga kusog nga epekto, ug taas nga serbisyo sa kinabuhi, Ang mga tubo sa PE maayo alang sa pagdala sa tubig, mga gas, ug uban pang mga pluwido ubos sa lainlaing mga kondisyon sa presyur.

Key Features of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Kaagnasan & Pagbatok sa Kemikal

Makasugakod sa taya, timbangan, ug kadaghanan sa mga kemikal, paghimo niini nga angay alang sa agresibo nga mga palibot.

Gaan ang timbang & Flexible

Sayon sa pagdala ug pag-instalar tungod sa ubos nga gibug-aton; flexibility nagtugot bending nga walay mga lutahan sa pipila ka mga aplikasyon.

Taas nga Epekto Kusog

Makasukol sa grabeng kahimtang sa panahon ug pisikal nga kapit-os, pagpakunhod sa risgo sa pagkaguba.

Mga Lutahan nga Walay Leak

Ang heat-fused joints nagmugna og seamless connections, pagpamenos sa mga risgo sa leakage.

Taas nga Kinabuhi sa Serbisyo

UV-resistant ug abrasion-proof, uban sa usa ka kinabuhi nga labaw pa 50 tuig ubos sa saktong kondisyon.

Hamis nga Inner Surface

Gipamub-an ang pagkawala sa friction, pagpauswag sa kahusayan sa pag-agos ug pagpaubos sa gasto sa enerhiya.

Eco-Friendly

Dili makahilo, ma-recycle, ug pagsunod sa mga sumbanan sa kaluwasan sa tubig mainom.

Epektibo sa Gasto

Ubos nga gasto sa pag-instalar ug pagmentinar kon itandi sa tradisyonal nga mga materyales (e.g., metal, konkreto).

(Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials)

Specifications of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Below’s the item details for HHM TR480AT HDPE Granules:

This is HHM TR480AT. It’s a high-density polyethylene (HDPE) plastic granule. The material is virgin grade. This indicates it’s new, extra plastic. It’s made especially for extrusion molding. This process forms thawed plastic. It’s best for making pipes.

The granules are created for pipe applications. They use superb stiffness. They also have excellent toughness. This combination manages stress well. It withstands effects also. The material flows efficiently when melted. This is crucial for constant pipeline manufacturing. It aids develop uniform pipeline walls. It stops defects.

HHM TR480AT has a high thaw circulation price. This number is around 0.25 g/10 min. It melts easily under heat. This makes handling reliable. It conserves power throughout production. The density is high. It’s about 0.955 g/cm THREE. High density indicates solid, rigid pipes. These pipes endure requiring usage.

The material performs well sought after problems. It withstands many chemicals. This includes acids and antacids. It deals with different solvents as well. It’s very durable outdoors. Sunshine and weather don’t damage it conveniently. Water absorption is very low. Pipelines stay dimensionally steady. They don’t swell or reduce a lot.

HHM TR480AT is trusted for pressure pipelines. It benefits supply of water pipes. It’s good for irrigation systems as well. Industrial fluid transport utilizes it. The color is all-natural. It looks milky white. You can include shade masterbatches quickly. This personalizes the last pipeline shade.

Key specs include the thaw flow rate. It’s 0.25 g/10 min (190 ° C, 5kg). Density is 0.955 g/cm ³. Tensile toughness at return is 26 MPa. Flexural modulus is 1200 MPa. The recommended thaw temperature is 200-220 ° C. The Vicat softening point is 125 ° C. It meets appropriate pipe product requirements.

(Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials)

Applications of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT is a leading pipeline grade virgin material. This HDPE granule provides strong performance for pipeline makers. It is created for extrusion molding procedures. The material melts easily. It streams smoothly via the extruder die. This produces regular pipeline shapes.

TR480AT provides excellent strength. It stands up to splitting effectively. Pipelines made from it manage high stress. They are dependable for demanding jobs. The product holds up against several chemicals. This is very important for industrial pipes. It also battles ecological stress fracturing. Pipeline last much longer outdoors.

Water system systems use this HDPE thoroughly. Local water pipe need long lasting pipes. TR480AT pipelines are perfect right here. Sewer and drainage pipes benefit also. The product resists deterioration. It manages waste flow without damage. Gas distribution networks also depend on this grade. Its safety and strength are confirmed.

Industrial applications are common. Mining operations utilize slurry pipes made from TR480AT. The product deals with abrasive products well. Manufacturing facilities set up chemical lines with it. Processing plants need reliable fluid transport. This HDPE quality meets those requirements.

Agricultural uses are considerable. Farmers lay irrigation pipelines across areas. TR480AT pipelines resist sunshine and weather condition. They don’t break down swiftly. Aquaculture arrangements utilize pipelines for water flow. The product is secure for fish and plants.

Processing TR480AT is reliable. It squeezes out at excellent rates. Producers conserve energy. Less material waste happens. Manufacturing expenses remain reduced. The final pipes have smooth surface areas. They reveal high dimensional stability. Pipeline joints attach conveniently and safely. Installers trust the high quality.

Pag-pack ug Pagpadala

Depende sa mga produkto ug sa gidaghanon,mahimo namon ang pagputos sa coiling,mga rolyo,pagputos sa bundle,mga kahon o mga kahon,ug uban pa.

Pagpadala:Sa dagat,riles,pinaagi sa hangin o ingon nga hangyo sa kustomer.

Profile sa Kompanya

Luoyang Datang Energy Tech Co., Ltd. usa ka nanguna nga tiggama sa China nga nag-espesyalisar sa taas nga kalidad nga plastik nga mga tubo ug mga kasangkapan. Gisangkapan sa state-of-the-art nga automated production lines ug gisuportahan sa usa ka team sa 200 mga propesyonal, nagtanyag kami usa ka halapad nga linya sa produkto nga naglangkob sa 150 matang sa plastik nga mga tubo ug mga kasangkapan nga gidisenyo alang sa suplay sa tubig ug drainage sistema, gas transmission, ug mga sistema sa pagpainit sa salog. Ang among nag-unang mga produkto naglakip sa PVC Pipes ug Fittings, PE (HDPE) Pipe ug Fitting, PPR Pipe ug Fittings, ug PEX Floor Heating Pipes.

Kung naa kay pangutana bahin sa HDPE Pipe Fitting, palihug ayaw pagpanuko sa pagkontak kanamo!

Ang Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Email: sales@pipesandfittings.net

Mga Termino sa Pagbayad

T/T,L/C sa panan-aw,Western Union & Paypal,ug uban pa.

5 FAQs of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Here are five common questions about HDPE High Density Polyethylene Extrusion Molding HHM TR480AT HDPE Granules Pipe Grade Virgin HDPE Plastic Raw Materials:

What makes TR480AT granules good for pipe extrusion?
TR480AT is a high density polyethylene grade. Its specific melt flow properties are designed for pipe production. This material flows smoothly in extrusion machines. It forms strong, consistent pipes. The density gives the pipes good pressure resistance. They won’t crack easily under stress.

Is TR480AT suitable for making drinking water pipes?
Oo, it is. This is virgin HDPE material. It means it’s made without recycled content. TR480AT meets common standards for potable water contact. It doesn’t add harmful chemicals to the water. Always check your local regulations for exact requirements.

Can TR480AT handle high temperatures?
It performs well within standard pipe application temperatures. HDPE like TR480AT softens around 120-130°C. For continuous use, keep it below 60°C. Its main strength is toughness at normal outdoor temperatures. It stays flexible in cold weather too.

Does this material need special certifications?
Oo, certifications are important for pipe applications. TR480AT typically complies with international standards like ISO 4427 for PE pipe materials. Manufacturers often provide test reports. These confirm properties like long-term strength and durability. Ask your supplier for the specific certificates.

Why is moisture control important before using TR480AT?
HDPE granules can absorb moisture from the air. Wet granules cause problems during extrusion. Steam bubbles form in the melted plastic. This creates defects in the finished pipe. Always store the bags in a dry place. Dry the granules properly right before you use them in the extruder. Proper drying ensures a smooth process and good pipe quality.

(Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials)