Overview of PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve

PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve is engineered for superior performance in plumbing, diwydiannol, a chymwysiadau masnachol. Wedi'i wneud o di-blwm, pres sy'n gwrthsefyll cyrydiad, mae'r falfiau hyn yn sicrhau gwydnwch parhaol a rheolaeth llif dibynadwy ar gyfer dŵr, nwy, olew, a hylifau eraill.

Gyda pheiriannu manwl gywir ac adeiladu cadarn, mae ein falfiau pres yn darparu gweithrediad llyfn, selio ardderchog, a gwrthwynebiad i bwysau uchel - gan eu gwneud yn ddelfrydol ar gyfer preswyl, masnachol, a systemau pibellau diwydiannol.

Key Features of PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve

Adeiladu Pres Premiwm - Di-blwm, gwrthsefyll cyrydiad, a gwydn

Dyluniad Atal Gollyngiad - Morloi tynn ar gyfer rheoli hylif yn ddiogel

Pwysedd Uchel & Gwrthsefyll Tymheredd - Perfformiad dibynadwy o dan amodau anodd

Gweithrediad Llyfn - Dolenni hawdd eu troi ar gyfer addasiad llif manwl gywir

Cymwysiadau Amlbwrpas - Yn gydnaws â dŵr, nwy, olew, a systemau HVAC

Maint Lluosog & Opsiynau Cysylltiad - Ar gael mewn ¼” i 2″ meintiau (CNPT, edafedd BSP)

(PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve)

Specification of PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve

This PU-10 solenoid shutoff controls water or air flow instantly. It makes use of electrical power to open up or shut promptly. The valve body is brass. Brass withstands rust well. This makes the shutoff sturdy for numerous usages. The valve opening is 3/8 modfedd. This dimension fits typical piping. The valve is normally closed (NC). It remains closed without power. Using voltage opens up the circulation path. It is a 2/2 method shutoff. This indicates it has two ports: one inlet, one electrical outlet. It is direct acting. The solenoid plunger directly relocates the seal. No diaphragm or piston is needed. This layout is basic and trustworthy. The valve works with low differential stress.

The coil voltage is 12V DC or 24V DC. Select the voltage matching your system. The coil is rated IP65. This safeguards versus dirt and water jets. The valve takes care of stress from 0 i 10 bar. Don’t use it above 10 bar. The max pressure is vital for safety. The shutoff collaborates with water or air. Don’t utilize oil-based fluids or aggressive chemicals. They could damage the seals. The operating temperature range is -10 ° C to +80 °C. Avoid cold problems. Stay clear of severe heat above 80 °C.

Installment is simple. Attach pipelines to the threaded ports. Usage typical 10mm tube installations. The valve ports are G1/8″ BSPP women strings. Make certain the flow direction is proper. Try to find the arrowhead on the shutoff body. Power connects to the coil terminals. Adhere to the electrical wiring layout. Protect the coil from voltage spikes. This valve is CE and RoHS compliant. It fulfills common security criteria. Utilize it in water dispensers, air compressors, or irrigation controls. It works well in pneumatically-driven systems. It functions well in water control systems. Normal cleansing aids stop clogging. Check the seal condition occasionally.

(PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve)

Applications of PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve

Individuals utilize the PU-10 3/8″ Orifice 10mm NC 2/2 Method Direct Acting Brass Water Air Solenoid Valve in lots of places. It regulates water or air circulation instantly. The valve keeps closed normally. You send out power to the coil. The coil after that raises the bettor. This opens the valve. You stop the power. The plunger drops back down. The shutoff shuts down. This direct acting layout is straightforward. It functions well also at low pressure.

This brass valve is strong. It resists rust. It handles water and air well. You see it frequently in water supply for yards or farms. It turns areas on and off. It operates in automobile cleans. It manages water spray for washing or soaping. Manufacturing facilities utilize it a lot. It handles air circulation in devices. It regulates water in cooling down systems or cleaning lines.

The valve fits many makers. Drink dispensers utilize it to regulate water or syrup. Coffee makers use it to fill up storage tanks. Water filtration systems utilize it to change circulations. It works with pressed air. People use it for pumping up points or powering devices. The 3/8″ size is common. It attaches easily to pipelines. The 10mm coil size is conventional. It plugs into routine power materials.

This valve takes care of various pressures. Water stress up to 145 PSI is great. Atmospheric pressure as much as 145 PSI is additionally great. It works with hot water. It handles temperatures up to 120 °C. It deals with cold water as well. Icing up temperatures will not damage it. It requires power. Air conditioning or DC voltages work. Common selections are 12V, 24V, 110V, or 220V AC/DC. Plumbing professionals and professionals mount it easily. It screws into place. The cords link to the coil. It’s trustworthy for beginning and quiting circulation swiftly. It’s a basic component for automation.

Pacio a Cludo

Yn dibynnu ar y cynhyrchion a qty,gallem wneud y pacio o torchi,rholiau,pacio bwndel,cewyll neu focsys,etc.

Cludo:Ar y môr,rheilffordd,mewn awyren neu fel cais cwsmer.

Proffil Cwmni

Mae Luoyang Datang Energy Tech Co., Cyf. yn wneuthurwr Tsieineaidd blaenllaw sy'n arbenigo mewn pibellau a ffitiadau plastig o ansawdd uchel. Yn meddu ar y llinellau cynhyrchu awtomataidd diweddaraf ac wedi'u cefnogi gan dîm o 200 gweithwyr proffesiynol, rydym yn cynnig llinell gynnyrch helaeth sy'n cynnwys drosodd 150 mathau o bibellau a ffitiadau plastig a ddyluniwyd ar gyfer systemau cyflenwi dŵr a draenio, trawsyrru nwy, a systemau gwresogi llawr. Mae ein prif gynnyrch yn cynnwys Pibellau a Ffitiadau PVC, Addysg Gorfforol (HDPE) Pibellau a Ffitiadau, Pibellau a Ffitiadau PPR, a Phibellau Gwresogi Llawr PEX.

Os bydd gennych unrhyw ymholiadau ynglŷn â Gosod Pibellau HDPE, peidiwch ag oedi i gysylltu â ni!

Ffon.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Ebost: sales@pipesandfittings.net

Telerau Talu

T/T,L/C ar yr olwg,Undeb gorllewinol & Paypal,etc.

5 FAQs of PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve

What’s the PU-10 valve’s pressure limit?
This valve handles up to 145 PSI. It works reliably within this range. Exceeding it risks damage. Always check your system pressure first.

What temperatures can it handle?
The valve works with fluids from 32°F to 140°F. Its seals and materials are designed for this. Hotter liquids can break it. Colder liquids might freeze and cause problems.

What fluids work with this valve?
Use it for clean water or air. It’s okay for neutral gases too. Avoid corrosive chemicals, oils, or dirty water. These harm the seals and inner parts.

What voltages are available?
You get common choices: 12V DC, 24V DC, 24V AC, 120V AC, 240V AC. Pick the voltage matching your power supply. Using the wrong one breaks the coil.

How do I install it correctly?
Mount the valve upright. The arrow on the body points the flow direction. Connect pipes to the 3/8″ ports securely. Use thread sealant. Make sure electrical connections are tight and correct. Power opens the valve. Removing power closes it.

(PU-10 3/8″ Orifice 10mm NC 2/2 Way Direct Acting Brass Water Air Solenoid Valve)