Overview of Gas Brass Push Swivel Half Union Tube Fitting

Gas Brass Push Swivel Half Union Tube Fitting provides reliable, connexions durables pour tous vos besoins en plomberie et en système CVC. Fabriqué sans plomb, alliage de laiton résistant à la dézincification, ces raccords répondent aux normes strictes de l'industrie en matière de performance et de sécurité. Parfait pour les applications résidentielles et commerciales, nos raccords en laiton créent une sécurité, joints étanches dans les conduites d'alimentation en eau, systèmes de gaz, et installations d'air comprimé.

Key Features of Gas Brass Push Swivel Half Union Tube Fitting

Matériau haut de gamme – Sans plomb, Laiton DZR pour la résistance à la corrosion
Connexions sécurisées – Filetages de précision pour des joints étanches
Résistant à la température – Convient pour chaud & systèmes d'eau froide
Applications polyvalentes – Fonctionne avec du cuivre, PEX, et tuyaux en PVC
Qualité certifiée – NSF/ANSI 61 & 372 certifié pour l'eau potable
Configurations multiples – Coudes, t-shirts, accouplements, adaptateurs disponibles

(Raccord de tube demi-union pivotant à poussée en laiton à gaz)

Specifications of Gas Brass Push Swivel Half Union Tube Fitting

Right here are the specs for the Gas Brass Press Swivel Half Union Tube Installation. This fitting connects tubing securely in gas applications. It uses brass. Le laiton résiste bien à la rouille. Brass deals with high pressure also.

You obtain a push-to-connect end. This end slides onto your tubes quick. You require no special devices. Just press the tube in. It secures limited. It seals immediately. This functions wonderful with soft copper or light weight aluminum tubes. Check your tubing OD matches the fitting size.

The other end is a male BSPP thread. This thread screws into a women port. The whole suitable swivels easily. This swivel assists throughout installment. You avoid turning the tubes. You straighten every little thing quickly. Tightening up the nut compresses the seal. It makes a leak-proof joint.

Stress rating is crucial. This fitting deals with approximately 150 PSI working stress. Its ruptured pressure is much higher. Temperature level range is additionally crucial. It functions fine from -20 ° F up to +250 °F. These specs fit many gas systems.

The product is lead-free brass. This meets risk-free alcohol consumption water policies. It also works fine for fuel gas, air, or inert gases. Do not use it with strong acids or chemicals. Brass will not stand up.

Sizes are common. Find them in 1/8″, 1/4″, 3/8″, and 1/2″ tube diameters. The thread side matches television dimension. So a 1/4″ tube fitting has a 1/4″ BSPP male string.

(Raccord de tube demi-union pivotant à poussée en laiton à gaz)

Applications of Gas Brass Push Swivel Half Union Tube Fitting

Gas brass push swivel half union tube fittings are important parts for attaching tubing in gas systems. They offer a fast and reputable method to sign up with pipelines. The brass product is durable and stands up to corrosion well. This makes them risk-free for various gases. The push-to-connect style makes installment extremely straightforward. You just press television right into the suitable. Il se verrouille fermement. Aucun outil spécial n'est nécessaire. This conserves considerable time throughout setting up or repair work.

The swivel function is very helpful. It enables the linked tube to rotate slightly. This stops kinks or stress on the tubes. It assists specifically in limited areas or where resonance takes place. The fifty percent union style suggests one side is a press installation. The other side has a threaded link. This lets you easily attach to existing equipment like valves or regulatory authorities. You obtain a secure web link without complex adapters.

These installations locate use in several areas requiring secure gas flow. Medical facilities utilize them for oxygen lines and clinical gas panels. They guarantee leak-free links important for client safety. Laboratories count on them for tool gas supplies. Accuracy gas control is vital for precise examination outcomes. Industrial settings use them widely. They link pneumatically-driven controls and operate machinery requiring clean, completely dry air. Breweries and drink plants use them for carbon dioxide lines and various other procedure gases. Food processing lines need reliable gas connections too.

Plumbing and heating and cooling technicians utilize these fittings for fuel gas lines. Gas or gas systems call for safe and secure joints. They are also typical in pressed air systems for devices. The push-to-connect layout quicken installment. Maintenance becomes easier because tubes separate quickly. The brass body endures typical system pressures and temperature levels. It takes care of common gases without weakening. These installations give a sensible service for dependable gas transfer. They combine convenience of usage with dependable performance across many applications.

Emballage et expédition

Cela dépend des produits et de la quantité,nous pourrions faire l'emballage du bobinage,rouleaux,emballage en paquet,caisses ou boîtes,etc..

Expédition:Par la mer,chemin de fer,par avion ou comme demande du client.

Profil de l'entreprise

Luoyang Datang Energy Tech Co., Ltée. est un fabricant chinois leader spécialisé dans les tuyaux et raccords en plastique de haute qualité. Equipé de lignes de production automatisées de pointe et soutenu par une équipe de 200 professionnels, nous proposons une vaste gamme de produits comprenant plus de 150 types de tuyaux et raccords en plastique conçus pour les systèmes d'approvisionnement en eau et de drainage, transport de gaz, et systèmes de chauffage au sol. Nos principaux produits comprennent des tuyaux et raccords en PVC, PE (PEHD) Tuyaux et raccords, Tuyaux et raccords PPR, et tuyaux de chauffage au sol PEX.

Si vous avez des questions concernant les raccords de tuyaux en PEHD, n'hésitez pas à nous contacter!

Tél.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

WhatsApp: 0086-183 3790 0677

E-mail: sales@pipesandfittings.net

Conditions de paiement

T/T,L/C à vue,Western union & Paypal,etc..

5 FAQs of Gas Brass Push Swivel Half Union Tube Fitting

Voici 5 FAQs about Gas Brass Push Swivel Half Union Tube Fittings:

What is this fitting?
This is a connector for gas tubing. It’s made of brass. It lets you join two pieces of gas tubing. One end pushes onto the tube. The other end has a swivel union nut. The swivel lets you tighten it easily. It connects to another half union fitting.

Why use it for gas lines?
Le laiton résiste bien à la corrosion. This is important for gas systems. The push connection is fast. Vous n'avez pas besoin d'outils spéciaux. The swivel nut makes installation simpler in tight spots. It ensures a secure, leak-free join for gas.

What materials is it made from?
It’s made from brass. Le laiton est fort. Brass handles gas safely. It doesn’t spark. This is crucial for gas applications. The seals inside are usually special gas-resistant polymers.

Quelle pression peut-il supporter?
Check the manufacturer’s rating. Different sizes have different ratings. Brass fittings are strong. They handle typical residential gas pressures fine. Never exceed the stated pressure rating. Safety is important with gas.

Comment puis-je l'installer?
Cut the tube cleanly. Deburr the end. Push the tube straight into the fitting. Push until it stops. You should feel it lock. Connect the swivel end to the mating half union. Hand-tighten the union nut first. Then use wrenches to tighten it fully. Always check for leaks after installation.

(Raccord de tube demi-union pivotant à poussée en laiton à gaz)