Overview of Refrigeration Brass Flare Nut 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE

Écrou évasé en laiton pour réfrigération 1/4 3/8 1/2 in SAE Brass Pipe Fittings provides reliable, connexions durables pour tous vos besoins en plomberie et en système CVC. Fabriqué sans plomb, alliage de laiton résistant à la dézincification, ces raccords répondent aux normes strictes de l'industrie en matière de performance et de sécurité. Parfait pour les applications résidentielles et commerciales, nos raccords en laiton créent une sécurité, joints étanches dans les conduites d'alimentation en eau, systèmes de gaz, et installations d'air comprimé.

Key Features of Refrigeration Brass Flare Nut 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE

Matériau haut de gamme – Sans plomb, Laiton DZR pour la résistance à la corrosion
Connexions sécurisées – Filetages de précision pour des joints étanches
Résistant à la température – Convient pour chaud & systèmes d'eau froide
Applications polyvalentes – Fonctionne avec du cuivre, PEX, et tuyaux en PVC
Qualité certifiée – NSF/ANSI 61 & 372 certifié pour l'eau potable
Configurations multiples – Coudes, t-shirts, accouplements, adaptateurs disponibles

(Écrou évasé en laiton pour réfrigération 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE)

Specifications of Refrigeration Brass Flare Nut 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE

Refrigeration brass flare nuts connect tubing in cooling systems. These nuts prevail dimensions: 1/4 pouce, 3/8 pouce, 1/2 pouce. They fit SAE flare fittings perfectly. SAE implies Culture of Automotive Engineers. This standard makes certain reliable connections almost everywhere. Brass is the product utilized. Brass functions well for refrigeration. Il gère la haute pression en toute sécurité. It likewise withstands rust properly. This deterioration resistance is very important. Dampness often triggers issues in air conditioning units and refrigerators.

The nuts feature a 45-degree flare seat. This angle matches the tubes flare. It produces a limited metal-to-metal seal. This seal prevents cooling agent leaks absolutely. Leakages are bad for system efficiency. They damage the setting too. These nuts are extremely long lasting. Brass stays strong over time. It doesn’t break or become breakable conveniently. This reliability matters for long system life.

You make use of these nuts with flared copper tubing. They tighten up onto the fitting body. Proper firm is essential. Use a torque wrench for precision. Overtightening damages the flare. Undertightening causes leakages. The internal thread is precision-cut. This ensures smooth threading onto installations. Smooth threading avoids cross-threading problems. These nuts suit several applications. They work in ac unit and fridges. They are also made use of in heatpump and chillers. Compatibility is vital for specialists.

These installations operate under high pressure. They manage typical refrigerants reliably. Temperature extremes are not a problem. Brass does well from really cold to really warm. The material is simple to mount. It additionally enables disassembly if required. Upkeep comes to be simpler. These are vital components. They create protected connections in important systems.

(Écrou évasé en laiton pour réfrigération 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE)

Applications of Refrigeration Brass Flare Nut 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE

Refrigeration brass flare nuts are important equipment in several cooling systems. They connect copper tubes securely. These nuts can be found in usual SAE dimensions like 1/4″, 3/8″, and 1/2″. You find them almost everywhere refrigeration or cooling runs. They are essential for building trustworthy connections.

These nuts sign up with tubes to shutoffs. They attach tubes to compressors. They connect tubing to condensers and evaporators. Basically, any type of point requiring a limited, leak-proof seal in the cooling agent circuit utilizes them. Their design functions flawlessly with flared copper tube ends. The flared end fits well versus the matching fitting surface area. Tightening up the nut develops a solid metal-to-metal seal. This seal holds back refrigerant gas and oil under stress. It protects against pricey leaks.

Brass is the preferred material below. It takes care of the harsh problems inside refrigeration systems well. Brass resists rust from typical cooling agents and compressor oils. It endures vibration and thermal cycling without fracturing. Brass nuts won’t seize onto steel fittings like steel nuts might. This makes installment smoother. It likewise makes future service much easier.

The SAE sizing ensures compatibility. Technicians recognize a 1/4″ SAE nut fits common 1/4″ OD flared tubes. The very same looks for 3/8″ and 1/2″ tailles. This standardization stops errors throughout setting up or repair work. Specialists rely upon these nuts daily. They are basic for creating efficient, leak-free air conditioning systems in homes, autos, grocery stores, and industrial plants. Proper installation is essential. A loose flare nut creates leakages. An overtightened nut harms the flare. Obtaining it best guarantees years of trouble-free operation.

Emballage et expédition

Cela dépend des produits et de la quantité,nous pourrions faire l'emballage du bobinage,rouleaux,emballage en paquet,caisses ou boîtes,etc..

Expédition:Par la mer,chemin de fer,par avion ou comme demande du client.

Profil de l'entreprise

Luoyang Datang Energy Tech Co., Ltée. est un fabricant chinois leader spécialisé dans les tuyaux et raccords en plastique de haute qualité. Equipé de lignes de production automatisées de pointe et soutenu par une équipe de 200 professionnels, nous proposons une vaste gamme de produits comprenant plus de 150 types de tuyaux et raccords en plastique conçus pour les systèmes d'approvisionnement en eau et de drainage, transport de gaz, et systèmes de chauffage au sol. Nos principaux produits comprennent des tuyaux et raccords en PVC, PE (PEHD) Tuyaux et raccords, Tuyaux et raccords PPR, et tuyaux de chauffage au sol PEX.

Si vous avez des questions concernant les raccords de tuyaux en PEHD, n'hésitez pas à nous contacter!

Tél.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

WhatsApp: 0086-183 3790 0677

E-mail: sales@pipesandfittings.net

Conditions de paiement

T/T,L/C à vue,Western union & Paypal,etc..

5 FAQs of Refrigeration Brass Flare Nut 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE

What are these brass flare nuts for?
These brass flare nuts connect refrigerant lines in AC or refrigeration systems. They seal copper tubing to valves or other fittings. Use them with matching flare fittings. They prevent leaks at connection points. This keeps refrigerant inside the system.

Quelles tailles proposez-vous?
We supply common SAE sizes: 1/4 pouce, 3/8 pouce, et 1/2 pouce. These match standard refrigeration copper tubing outside diameters. Confirm your tube size before ordering. Using the wrong size nut causes leaks or damage.

Why choose brass?
Le laiton résiste bien à la corrosion. Refrigerant and moisture cause rust in other metals. Brass stays strong over time. Il gère la haute pression en toute sécurité. Brass is also easy to tighten properly without breaking. Steel or cheaper metals fail faster.

Comment puis-je les installer correctement?
Slide the nut onto the tube end first. Then flare the tube end to a 45-degree angle. Match the flare to the fitting cone. Tighten the nut firmly by hand. Finish with a wrench: turn it one more full turn. Ne serrez pas trop. Check for leaks after.

Do I need extra sealant?
Non. These nuts create a metal-to-metal seal. The flared tube end presses tightly against the fitting cone. Adding tape or paste ruins this seal. It can cause leaks. Ensure the flare is clean and smooth. Good flares seal perfectly without help.

(Écrou évasé en laiton pour réfrigération 1/4 3/8 1/2 dans les raccords de tuyauterie en laiton SAE)