Introduction of HDPE 110mm Equal Tee Poly Polyethylene Hdpe Electrofusion Fittings

Tuyau en polyéthylène haute densité (Tuyau PE) est une solution de tuyauterie thermoplastique durable et flexible largement utilisée dans l'industrie, municipal, agricole, et applications minières. Connu pour son excellente résistance chimique, haute résistance aux chocs, et longue durée de vie, Les tuyaux en PE sont idéaux pour le transport de l'eau, gaz, et d'autres fluides dans des conditions de pression variables.

Key Features of HDPE 110mm Equal Tee Poly Polyethylene Hdpe Electrofusion Fittings

Corrosion & Résistance chimique

Résistant à la rouille, échelle, et la plupart des produits chimiques, ce qui le rend adapté aux environnements agressifs.

Léger & Flexible

Facile à transporter et à installer grâce à son faible poids; la flexibilité permet une flexion sans joints dans certaines applications.

Résistance élevée aux chocs

Résiste aux conditions climatiques extrêmes et au stress physique, réduire les risques de casse.

Joints sans fuite

Les joints thermofusionnés créent des connexions transparentes, minimiser les risques de fuite.

Longue durée de vie

Résistant aux UV et à l'abrasion, avec une durée de vie dépassant 50 ans dans de bonnes conditions.

Surface intérieure lisse

Réduit la perte de friction, améliorer l’efficacité des flux et réduire les coûts énergétiques.

Respectueux de l'environnement

Non toxique, recyclable, et conforme aux normes de sécurité de l’eau potable.

Rentable

Coûts d’installation et de maintenance réduits par rapport aux matériaux traditionnels (par ex., métal, béton).

(Garnitures d'électrofusion de HDPE de polyéthylène de pièce en t égale de HDPE 110mm)

Specifications of HDPE 110mm Equal Tee Poly Polyethylene Hdpe Electrofusion Fittings

This HDPE 110mm Equal Tee fitting connects 3 pipelines of the exact same size. It’s made from high-density polyethylene. This material is difficult. Il résiste bien à la détérioration. Chemicals won’t harm it easily. The fitting benefit water, gaz, and commercial lines. It’s constructed for underground use. Straight funeral is fine.

The nominal size is 110 millimètres. All three openings match this size. This makes certain a consistent circulation course. The fitting usages electrofusion innovation. You weld it directly onto the pipeline finishes. Installed copper wires are inside the outlet. Use the proper voltage with a special machine. The wires heat up. The HDPE product thaws. The suitable and pipeline melt with each other permanently. Cela développe une forte, joint étanche. The joint is as strong as the pipeline itself.

Installment requires clean pipeline ends. Scrape off the outer oxide layer. Mark the insertion deepness clearly. Line up the pipe and suitable exactly. Adhere to the combination machine’s instructions specifically. Correct fusion time and cool-down are vital. Wait on the joint to cool completely before handling.

This tee takes care of high pressure. Its stress score is commonly PN10 or PN16. This indicates 10 ou 16 bar à 20 °C. Temperature affects the pressure rating. Check the particular maker’s information. The material handles chilly temperature levels well. It remains versatile down to -20 °C. The optimum operating temperature is typically +60 °C. It fulfills worldwide requirements like ISO 4427. Quality assurance makes certain dependability. Electrofusion fittings provide long service life. They are a trusted remedy for modern-day piping networks. Appropriate installation is essential for performance.

(Garnitures d'électrofusion de HDPE de polyéthylène de pièce en t égale de HDPE 110mm)

Applications of HDPE 110mm Equal Tee Poly Polyethylene Hdpe Electrofusion Fittings

HDPE 110mm Equal Tee fittings connect 3 pipes of the exact same dimension. They use electrofusion. This approach melts the suitable and pipeline with each other. Cela crée une permanence, joint étanche. These tees are crucial for developing strong piping networks.

Individuals use them thoroughly in water systems. Community water pipe require trustworthy links. Industrial plants use them for procedure water lines. Mining operations count on them for slurry transportation. The smooth bore keeps water flowing well. It prevents build-up inside the pipeline.

Gas distribution networks depend on these fittings. Safety is critical with gas. The merged joint gives extraordinary strength. It holds stress securely. Leaks are avoided. The polyethylene material withstands corrosion. It handles gas without weakening.

Agricultural irrigation systems benefit greatly. Farmers lay miles of pipe for crops. These tees branch lines successfully. They stand up to consistent exposure to sun and chemicals. Plant foods won’t damage the HDPE. Hidden installations are common. The product deals with dirt stress and anxieties.

Wastewater therapy plants set up lots of 110mm tees. They connect collection lines and therapy devices. HDPE deals with harsh sewage flows. It resists abrasion from solids. Electrofusion joints are watertight. They protect against groundwater contamination.

Industrial facilities route numerous liquids. These tees link chemical lines safely. HDPE tolerates numerous acids and bases. It works for cooling water circuits. Refine lines utilize them for branching. The material is light-weight. Setup is quicker than steel choices.

The electrofusion procedure needs correct tools. Trained specialists adhere to details steps. Pipeline end preparation is crucial. Cleaning up the surface is crucial. The combination criteria need to be correct. This ensures a perfect, long lasting joint each time.

Emballage et expédition

Cela dépend des produits et de la quantité,nous pourrions faire l'emballage du bobinage,rouleaux,emballage en paquet,caisses ou boîtes,etc..

Expédition:Par la mer,chemin de fer,par avion ou comme demande du client.

Profil de l'entreprise

Luoyang Datang Energy Tech Co., Ltée. est un fabricant chinois leader spécialisé dans les tuyaux et raccords en plastique de haute qualité. Equipé de lignes de production automatisées de pointe et soutenu par une équipe de 200 professionnels, nous proposons une vaste gamme de produits comprenant plus de 150 types de tuyaux et raccords en plastique conçus pour les systèmes d'approvisionnement en eau et de drainage, transport de gaz, et systèmes de chauffage au sol. Nos principaux produits comprennent des tuyaux et raccords en PVC, PE (PEHD) Tuyaux et raccords, Tuyaux et raccords PPR, et tuyaux de chauffage au sol PEX.

Si vous avez des questions concernant les raccords de tuyaux en PEHD, n'hésitez pas à nous contacter!

Tél.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

WhatsApp: 0086-183 3790 0677

E-mail: sales@pipesandfittings.net

Conditions de paiement

T/T,L/C à vue,Western union & Paypal,etc..

5 FAQs of HDPE 110mm Equal Tee Poly Polyethylene Hdpe Electrofusion Fittings

What is an HDPE 110mm Equal Tee Electrofusion Fitting? This fitting is a T-shaped pipe connector. All three openings are 110mm in diameter. It is made from high-density polyethylene plastic. Electrofusion uses built-in heating elements to bond it to pipes. This creates a seamless joint.

How does the electrofusion process work for this tee? The fitting has internal copper wires. You slide the tee onto clean, prepared HDPE pipe ends. You attach clips from an electrofusion machine. The machine sends electricity through the wires. The wires generate heat. The heat melts the HDPE surfaces. The melted plastic mixes and fuses. It cools into one solid piece.

What are the main uses for this fitting? It is common in water supply lines. It works for gas distribution pipes. It suits industrial fluid transport. It handles underground installations well. It manages pressurized liquids or gases safely.

Why choose HDPE electrofusion fittings? They form permanent, connexions sans fuite. They resist corrosion and chemical damage. They handle high pressure reliably. They are lighter than metal fittings. They install quickly with minimal equipment. They last decades with low maintenance.

How do I install the HDPE 110mm Equal Tee Electrofusion Fitting? Cut the HDPE pipes square. Clean the pipe surfaces thoroughly. Remove the outer skin with a scraping tool. Mark insertion depths on the pipes. Slide the tee onto the pipes up to the marks. Connect the electrofusion machine leads. Enter the fitting’s barcode or preset program. Start the fusion cycle. The machine controls heating and timing. Let the joint cool untouched. Check the fusion indicator rings for proper melt.

(Garnitures d'électrofusion de HDPE de polyéthylène de pièce en t égale de HDPE 110mm)