Píob PE vs Píob PVC in Uisciúcháin Talmhaíochta: Anailís Chomparáideach

Leis an éileamh atá ag méadú ar shábháil éifeachtach uisce sa talmhaíocht nua-aimseartha, dearadh eolaíoch an chórais uisciúcháin agus roghnú na n-ábhar píblíne anois an eochair. As the core components of agricultural irrigation, Corpoideachas (poileitiléin) píopaí and PVC (clóiríd polaivinile) pipes are widely used because of their performance advantages. This paper will deeply analyze the specific application scenarios, specifications and selection suggestions of the two materials in agricultural irrigation, to help users optimize the design of irrigation system.

PE Pipe in Agricultural Irrigation Aiarratass & paraiméadair

Due to its flexibility, corrosion resistance and low temperature resistance, PE pipes are widely used in the following scenarios:

Córais uisciúcháin drip: PE pipes can achieve precise irrigation through microholes or drippers, especially suitable for cash crops such as fruit trees and vegetables.

Mobile sprinkler irrigation: The lightweight PE pipe is easy to disassemble and assemble, suitable for seasonal irrigation or temporary water supply needs.

Buried underground irrigation: PE pipe is resistant to soil chemical corrosion, suitable for long-term buried use, reduce the risk of pipeline aging.

Hilly and complex terrain: its flexibility can adapt to terrain fluctuations, reduce the use of connectors, reduce the probability of water leakage.

Píob PE in Uisciúcháin Talmhaíochta Ssonraíochtaí &Models

PE pipe specifications commonly used in agricultural irrigation are divided according to pressure grade and pipe diameter:

Rátáil brú: PN6 (0.6MPa), PN8 (0.8MPa), PN10 (1.0MPa), suitable for scenarios with different water pressure requirements.

Pipe diameter range: DN16mm to DN315mm, of which DN50mm-DN160mm is the mainstream model for agricultural irrigation.

Standard reference: in line with GB/T 13663.2-2018 “poileitiléin (Corpoideachas) pipe system for water supply” caighdeánach, to ensure pressure resistance and environmental protection performance.

Advantages of PE Pipe in Agricultural Irrigation

Friotaíocht teocht íseal (-20℃~40℃), suitable for cold areas.

Flexible and easy to lay, low construction cost.

Strong impact resistance and service life of up to 50 blianta.

PVC pipe in Atalmhaiochta mérrigation Application & paraiméadair

PVC pipe is known for its high strength and low cost, and is mainly used in:

Trunk water pipeline: The rigid structure is suitable for long distance and large flow water transmission, such as the laying of the main pipe from the reservoir to the field.

Fixed sprinkler irrigation system: through flange or adhesive connection, high stability, suitable for large-scale farmland.

Open channel replacement project: PVC pipe can replace the traditional earth channel, reduce leakage, improve the efficiency of water transmission.

Irrigation inside the greenhouse: smooth surface, ní éasca a scála, suitable for humidity control needs in the greenhouse.

PVC pipe in Atalmhaiochta méuisciúcháin Sonraíochtaí & Models

PVC pipe for agricultural irrigation should meet the following parameter standards:

Nominal pressure: 0.6MPa, 0.8MPa, 1.0MPa, corresponding to different wall thicknesses (such as Φ110mm pipe wall thickness of 3.2mm-4.2mm).

Pipe diameter range: DN20mm to DN400mm, of which DN90mm-DN200mm is the common model.

Execution standard: in accordance with GB/T 13664-2006 “Hard polyvinyl chloride (PVC-U) pipe for Low pressure irrigation”, to ensure pressure resistance and durability.

Abuntáistí de PVC pipe in Atalmhaiochta méuisciúcháin

High rigidity, suitable for ground fixed laying.

The cost is lower than PE tube, and the economy is outstanding.

Good high temperature resistance (working temperature 0℃~45℃).

Corpoideachas Pipes Vs Píobán PVCs comparative Analysis

Selection suggestions:

– Terrain complex or low temperature environment: PE pipe is preferred.

– Long distance fixed water delivery: PVC piping is recommended to control costs.

– Drip irrigation/sprinkler irrigation system: Depending on budget and maintenance conditions, PE pipe is suitable for long-term use, PVC pipe is suitable for short-term projects.

PE pipe and PVC pipe have their own advantages in agricultural irrigation, and users need to scientifically select them according to the specific terrain, budget and maintenance conditions. As a professional pipe manufacturer, we provide high-quality PE/PVC irrigation pipes that meet national standards, support customized specifications and services, and help the global agriculture to achieve efficient water conservation goals.

Soláthraí

Tá Luoyang Datang Energy Tech Co., Teo. Is monaróir tosaigh Síneach é a dhéanann sainfheidhmiú ar phíobáin agus feistis phlaisteacha ardchaighdeáin. Feistithe le línte táirgeachta uathoibrithe den scoth agus tacaithe ag foireann de 200 gairmithe, cuirimid líne táirge fairsing a chuimsíonn os a chionn 150 types of plastic pipes and fittings designed for water supply and drainage systems, tarchur gáis, agus córais téimh urláir. I measc ár bpríomhtháirgí tá Píopaí agus Feistis PVC, Corpoideachas (HDPE) Píopaí agus Feistis, Píopaí agus Feistis PPR, agus Píopaí Téamh Urlár PEX.

Má tá aon fhiosrúcháin agat maidir le PVC Pipe & Píob PE in Uisciúcháin Talmhaíochta, ná bíodh drogall ort teagmháil a dhéanamh linn!

Teil.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Ríomhphost: sales@pipesandfittings.net