PengenalanPerlengkapan PPR Penggandeng Elektrofusi Polipropilena

pipa PPR (nama lengkap Pipa Kopolimer Acak Polypropylene, adalah pipa plastik berkinerja tinggi yang terbuat dari bahan baku polipropilen kopolimer acak berkualitas tinggi. Karena ketahanannya terhadap suhu tinggi, ketahanan terhadap tekanan, perlindungan lingkungan dan tidak beracun, itu banyak digunakan dalam membangun sistem air panas dan dingin, Rekayasa HVAC, transportasi air minum dan transmisi cairan industri, dan merupakan pengganti ideal untuk pipa logam tradisional.

Characteristics and Features of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Tahan suhu tinggi dan tekanan tinggi

Suhu kerja jangka panjang bisa mencapai 70°C, ketahanan suhu tinggi jangka pendek hingga 95°C, kinerja bantalan tekanan yang sangat baik (tingkat tekanan umum PN20, PN25).

Perlindungan lingkungan dan kesehatan

Bahan bakunya murni dan tidak beracun, memenuhi standar air minum (seperti FDA, EN ISO dan sertifikasi lainnya), jangan membiakkan bakteri, dan menjamin keamanan kualitas air.

Korosi dan anti kerak

Ketahanan asam dan alkali, ketahanan korosi kimia yang kuat, dinding bagian dalam yang halus, tidak mudah untuk diukur, penggunaan aliran stabil dalam jangka panjang.

Koneksi lelehan panas, penyegelan yang kuat

Mengadopsi teknologi soket meleleh panas, tidak ada risiko kebocoran pada sambungan, dan struktur terintegrasi meningkatkan keandalan sistem.

Ringan dan mudah dibuat

Beratnya saja 1/8 dari pipa logam, Yang nyaman untuk transportasi dan pemasangan, mengurangi biaya tenaga kerja.

Umur panjang dan perawatan rendah

Kehidupan pelayanan yang dirancang lebih dari 50 bertahun-tahun, bebas perawatan, dan biaya keseluruhannya rendah.

Hemat energi dan pelestarian panas

Konduktivitas termalnya rendah (hanya 1/200 dari pipa logam), yang mengurangi kehilangan panas dan cocok untuk sistem air panas.

(Perlengkapan PPR Penggandeng Elektrofusi Polipropilena)

Specifications of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Polypropylene Electrofusion Coupler fittings connect PPR pipes securely. They use electrofusion technology for strong joints. The fittings are made from polypropylene. This material resists chemicals well. It handles high temperatures too. Electrofusion works with built-in heating wires. Apply electric current to the wires. The heat melts the polypropylene. The pipe and fitting fuse together. The joint cools into a solid bond. This joint is leak-proof. It matches the pipe strength. These couplers come in standard sizes. Ukuran umum adalah 20mm, 25mm, 32mm, 40mm, 50mm, 63mm. Peringkat tekanan termasuk PN10, PN16, PN20. PN20 supports 20 tekanan bar pada 20°C. They handle temperatures from 0°C to 95°C. Short-term peaks up to 110°C are acceptable. The fittings meet international standards. ISO 15874 dan DIN 8077/8078 apply. This ensures reliability and safety. Use these couplers in plumbing systems. Mereka bekerja untuk saluran air panas. Cold water applications suit them too. Heating systems like radiators use them. Industrial fluid transport benefits from them. Electrofusion offers clear advantages. Joints are permanent and uniform. Instalasinya mudah. You need an electrofusion machine. Bersihkan ujung pipa terlebih dahulu. Insert the pipe into the coupler. Connect the machine leads. Input the correct fusion parameters. Start the fusion cycle. The machine controls heating time. It signals when fusion finishes. Cool the joint naturally. Proper installation prevents failures. Follow the manufacturer guidelines exactly. This ensures system longevity. These fittings save time during projects. They reduce maintenance needs later.

(Perlengkapan PPR Penggandeng Elektrofusi Polipropilena)

Applications of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Polypropylene electrofusion couplers join PPR pipes securely. They use electricity for the connection. Heat melts the plastic inside the coupler. The melted plastic fuses the pipe ends together. This creates one solid piece. The joint becomes very strong. It is leak-proof. Electrofusion is reliable for joining pipes.

These fittings work well in many places. They connect pipes in hot and cold water systems. Orang-orang menggunakannya di rumah. They connect pipes under floors or inside walls. Builders install them in apartment blocks. Factories rely on them for process lines. They are good for chemical transport. These couplers handle industrial fluids safely. They are common in irrigation projects for farms. Municipal water supply networks use them extensively. Gas distribution systems also employ these fittings.

Instalasinya mudah. Prepare the pipe ends first. Potong pipa dengan bersih. Remove any burrs. Measure the insertion depth carefully. Mark this depth on the pipe. Clean the pipe surface thoroughly. Scrape off the outer layer lightly. Wipe the area with a clean cloth. Avoid any grease or dirt. Position the coupler over the pipe ends. Align the pipes correctly inside it. Clamp the assembly firmly. Connect the electrofusion machine. Follow the machine’s instructions exactly. Enter the correct fusion parameters. Start the fusion cycle. The machine sends power to the coupler’s coil. The coil heats up. The plastic melts and fuses. Wait for the cooling time. Do not disturb the joint during cooling. Disconnect the machine after the cycle finishes. Check the joint visually. Ensure a proper bead forms around the pipe ends. This bead confirms good fusion. Always disconnect power before touching the coupler post-fusion.

Pengepakan dan Pengiriman

Tergantung pada produk dan qty,kita bisa membuat pengepakan melingkar,gulungan,pengepakan bundel,peti atau kotak,dll..

Pengiriman:Melalui laut,kereta api,melalui udara atau sebagai permintaan pelanggan.

Profil Perusahaan

Luoyang Datang Energy Tech Co., Ltd. adalah produsen Cina terkemuka yang mengkhususkan diri pada pipa dan perlengkapan plastik berkualitas tinggi. Dilengkapi dengan jalur produksi otomatis yang canggih dan didukung oleh tim 200 profesional, kami menawarkan lini produk ekstensif yang terdiri dari lebih dari 150 jenis pipa dan perlengkapan plastik yang dirancang untuk sistem pasokan air dan drainase, transmisi gas, dan sistem pemanas lantai. Produk utama kami meliputi Pipa dan Fitting PVC, PE (HDPE) Pipa dan Perlengkapannya, Pipa dan Fitting PPR, dan Pipa Pemanas Lantai PEX.

Jika Anda mempunyai pertanyaan mengenai Pemasangan Pipa HDPE, jangan ragu untuk menghubungi kami!

Telp.:0086-183 3790 0677

Wechat wechat: 0086-183 3790 0677

ada apa: 0086-183 3790 0677

E-mail: penjualan@pipesandfittings.net

Ketentuan Pembayaran

T/T,L/C pada pandangan,Serikat Barat & Paypal,dll..

5 FAQs of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

What is a Polypropylene Electrofusion Coupler?
It’s a special fitting for joining PPR pipes. The coupler has built-in heating wires. You connect it using an electrofusion machine. Hal ini menciptakan kekuatan, permanent bond between pipes.

How does the Electrofusion process work?
Pertama, clean and trim the pipe ends. Insert them into the coupler. Connect the electrofusion machine to the coupler’s terminals. The machine sends electricity. This melts the inside of the coupler and the pipe surface. The melted material fuses together. After cooling, it forms a solid joint.

What are the main advantages of Electrofusion PPR fittings?
They are very reliable. The fusion is leak-proof. Instalasi cepat. It needs less equipment than traditional welding. These fittings work well in tight spaces. They handle high pressure and temperature.

Where are Electrofusion Couplers used?
Mainly in plumbing and heating systems. They work for hot and cold water lines. You see them in industrial pipes, chemical transport, and fire safety systems. They are good for repairs or new projects.

What safety steps are important during installation?
Always follow the manufacturer’s guide. Wear protective gloves and glasses. Make sure pipes are clean and dry. Check the electrofusion machine settings. Do not move pipes during cooling. Test the joint after installation.

(Perlengkapan PPR Penggandeng Elektrofusi Polipropilena)