낙양 CAME ENERGY TECH CO.,LTD
펙스파이프와 바닥난방 시스템의 완벽한 만남.”1+1>2″
With the continuous improvement of people’s living comfort and building energy consumption requirements, the traditional radiator heating is gradually replaced by the floor heating system. Among the many floor heating pipe materials, PEX pipe (cross-linked polyethylene pipe) has become the “blood vessel” choice for plumbing and floor heating systems due to its excellent physical properties and engineering adaptability.
How is PEX pipe manufactured?
By using chemical or physical methods to form a ‘three-dimensional network structure’ in polyethylene molecular chains, ordinary plastic is upgraded into engineering pipes that are resistant to high temperatures, 압력, creep, and frost expansion.
Three Major Cross-Linking Processes
PEX-a (Peroxide Method): Cross-linked simultaneously at high temperature during extrusion, with the highest degree of cross-linking (70%~85%), offering the best flexibility and shape memory.
PEX-b (Silane Method): Cross-linked by curing in hot water/steam after extrusion, featuring low equipment requirements and high cost-effectiveness, with the largest market share.
PEX-c (Radiation Method): Finished pipes are cross-linked through electron beam irradiation, with no chemical residues and a uniform structure, mostly used for high-standard projects.
Underfloor heating is an efficient heating system.
The floor heating system distributes heat evenly to the floor, which then radiates the heat into the room. 대개, a layer of thermal insulation is installed beneath the heating elements to prevent heat loss. The system may take longer to heat up compared to traditional radiators, but it retains heat longer after being turned off, providing continuous comfort.
Why do underfloor heating systems prefer PEX pipes?
The floor heating system is divided into water heating and electric heating according to the heat source medium. PEX pipes are specifically used for water floor heating.
| Laying Method | Requires a large number of elbows/welding, high risk at buried joints | Can be coiled in whole rolls, zero underground joints, leakage probability approaching 0 |
| Thermal Response | Thick pipe wall, high heat capacity, slow temperature rise | Thin pipe wall (usually 2.0~2.3mm), fast heat conduction, more responsive temperature control at room temperature |
| System Noise | Water flow impact easily causes ‘water hammer’ noise | Polymer material absorbs vibration, quiet operation |
| Overall Cost | Expensive materials, high labor, frequent maintenance | later Slightly higher initial investment, but fast installation, 긴 서비스 수명, total lifecycle cost reduced by 30% |
The low-temperature radiant heating characteristic of floor heating (with supply water usually between 35~55℃) happens to fall within the optimal operating range of PEX, forming a ‘low temperature, high efficiency, and material durability’ golden combination.
Core Advantage：
- Temperature and Pressure Resistance: Long-term operating temperature of 60–70°C, can reach 90°C for short periods; pressure resistance of 1.0–1.6 MPa, fully covering underfloor heating conditions.
- Frost Resistance: The pipe body can elastically deform when water freezes and expands, and is not easily broken after thawing.
- Smooth Inner Wall: Low hydraulic resistance, 확장이 쉽지 않음, heat transfer efficiency increased by 15%~20%.
- Chemical Inertia: Resistant to acids and alkalis, 염화물 이온 부식에 대한 내성, suitable for various water qualities and antifreeze solutions.
- Lifetime Guarantee: According to ISO 15875/GB/T 18992.2 표준, the designed service life is≥ 50 연령.
The application of PEX pipes in plumbing and underfloor heating has evolved from ‘a single material replacement’ to ‘thermodynamic system integration.’ Its value lies not only in the pipe’s own temperature and pressure resistance but also in the complete closed loop formed with insulation structures, hydraulic design, and heat source control. Choosing the right oxygen barrier pipe, controlling loop pressure properly, strictly following backfill regulations, and maintaining closed water systems are key to delivering ‘half a century of silent warmth.’ Against the backdrop of the dual-carbon targets and the continuous upgrading of building energy efficiency standards, PEX underfloor heating is shifting from an improvement-oriented configuration to the fundamental infrastructure of new residential and public buildings, becoming an invisible cornerstone of a low-carbon living environment.
회사 프로필
Luoyang Datang Energy Tech Co., 주식회사. 고품질 플라스틱 파이프 및 부속품을 전문으로 하는 선도적인 중국 제조업체입니다.. 최첨단 자동화 생산 라인을 갖추고 있으며 팀의 지원을 받습니다. 200 전문가, 우리는 이상으로 구성된 광범위한 제품 라인을 제공합니다. 150 급수 및 배수 시스템용으로 설계된 플라스틱 파이프 및 부속품 유형, 가스 전달, 바닥 난방 시스템. 당사의 주요 제품에는 PVC 파이프 및 피팅이 포함됩니다., 체육 (HDPE) 파이프 및 피팅, PPR 파이프 및 피팅, 및 PEX 바닥 난방 파이프.
HDPE 파이프 피팅에 대해 문의사항이 있으신가요?, 주저하지 말고 저희에게 연락해주세요!
전화번호:0086-183 3790 0677
위챗: 0086-183 3790 0677
왓츠앱: 0086-183 3790 0677
이메일: sales@pipesandfittings.net
