고밀도 폴리에틸렌의 도입 (HDPE) Water Pipes for 1.6MPa Applications

고밀도 폴리에틸렌 파이프 (PE 파이프) 산업 현장에서 널리 사용되는 내구성이 뛰어나고 유연한 열가소성 배관 솔루션입니다., 지방 자치 단체, 농업, 마이닝 애플리케이션. 우수한 내화학성으로 잘 알려져 있습니다., 높은 충격 강도, 그리고 긴 서비스 기간, PE 파이프는 물 수송에 이상적입니다., 가스, 다양한 압력 조건에서의 기타 유체.

고밀도 폴리에틸렌의 주요 특징 (HDPE) Water Pipes for 1.6MPa Applications

부식 & 내화학성

녹에 강함, 규모, 그리고 대부분의 화학물질, 공격적인 환경에 적합하게 만들기.

경량 & 유연한

무게가 가벼워 운반 및 설치가 용이함; 유연성으로 인해 특정 응용 분야에서는 조인트 없이 구부릴 수 있습니다..

높은 충격 강도

극한의 기상 조건과 신체적 스트레스를 견뎌냅니다., 파손 위험 감소.

누출 없는 조인트

열 융합 조인트로 원활한 연결 생성, 누출 위험 최소화.

긴 서비스 수명

UV 저항성 및 내마모성, 수명을 초과하여 50 적절한 조건 하에서 수년.

매끄러운 내부 표면

마찰 손실 감소, 흐름 효율성 향상 및 에너지 비용 절감.

친환경

무독성, 재활용 가능, 식수 안전 기준을 준수합니다..

비용 효율적

기존 재료에 비해 설치 및 유지 관리 비용이 저렴합니다. (예를 들어, 금속, 콘크리트).

(고밀도 폴리에틸렌 (HDPE) Water Pipes for 1.6MPa Applications)

고밀도 폴리에틸렌의 사양 (HDPE) Water Pipes for 1.6MPa Applications

High-density polyethylene water pipes excel in requiring 1.6 MPa applications. This pressure rating, known as PN16, symbolizes their strength. These pipelines dependably manage continuous internal water pressure approximately 16 술집. They are manufactured mainly from PE100 or PE100-RC material grades. These modern-day polyethylene substances supply superior durability and long-lasting performance.

Standard Dimension Proportion 11 (SDR11) is common for PN16 HDPE pipelines. SDR specifies the pipeline’s wall thickness about its outdoors diameter. SDR 수치가 감소하면 벽면이 더 두꺼워집니다.. SDR11 pipelines supply the required toughness for 1.6 MPa systems. Common sizes vary from 20mm as much as 1200mm. Bigger dimensions are available. The wall thickness raises proportionally with the size.

The material makes sure outstanding chemical resistance. HDPE pipelines withstand rust from dirt and water. They are unaffected by hostile soils. 내부 표면이 매끄러워 마찰 손실이 최소화됩니다.. This causes lower pumping prices in time. Leakage is virtually gotten rid of with appropriate jointing. Combination welding produces smooth, monolithic connections.

HDPE pipelines remain adaptable. They endure ground activity and negotiation. This flexibility minimizes the requirement for complex fittings. Setup is normally faster than stiff pipeline choices. They perform well throughout a vast temperature variety. Typical operating temperatures extend from -40 ° C ~ 60 ℃. Short-term peaks approximately 80 ° C may serve.

Jointing techniques include butt combination, electrofusion, and mechanical fittings. Butt combination signs up with pipe ends directly using warm and pressure. Electrofusion makes use of ingrained heating elements in socket installations. Both methods produce permanent, watertight bonds. Mechanical installations fit particular connection factors.

These pipelines are ideal for drinkable water circulation networks. They serve well in industrial water transport systems. Irrigation keys gain from their durability. Mining applications use their abrasion resistance. Trenchless installation methods like directional drilling are perfectly fit.

(고밀도 폴리에틸렌 (HDPE) Water Pipes for 1.6MPa Applications)

고밀도 폴리에틸렌의 응용 (HDPE) Water Pipes for 1.6MPa Applications

High-density polyethylene pipes rated for 1.6 MPa are constructed challenging. This pressure score suggests they deal with demanding water systems very well. They are a solid plastic choice where reliability issues. Water pressure presses tough inside pipelines. These HDPE pipelines withstand that stress effectively. They won’t rupture or leakage under regular high-pressure problems.

HDPE product itself brings large advantages. It fights corrosion perfectly. Corrosion and chemical damage destroy steel pipes. HDPE pipes disregard these troubles entirely. This makes them last a lot longer underground or in challenging areas. They stay solid for decades. Maintenance prices go down substantially because they don’t wear away.

The pipes are also quite adaptable. They can bend a little without breaking. This aids during installation, particularly around obstacles or uneven ground. Employees locate them easier to deal with than rigid pipes. Trenching can occasionally be narrower, saving initiative and expense. Ground motion occurs. HDPE pipes move with the soil a little, reducing the opportunity of cracks.

Joining these pipelines is safe and secure. Workers fuse the pipeline finishes with each other utilizing heat. The thawed plastic kinds one solid item at the joint. This develops a watertight seal as solid as the pipeline itself. There are no powerlessness at the connections. Mechanical joints are an additional alternative, making use of strong installations tightened up onto the pipe.

These 1.6 MPa HDPE pipelines are utilized commonly. Municipal water divisions rely upon them for major supply lines. They carry high-pressure drinking water securely across cities and towns. Industrial sites require them for process water and relocating chemicals securely. Mines use them for dewatering and slurry transport due to the fact that they stand up to abrasion. Huge farms rely on them for effective irrigation systems delivering water under stress. Fire defense systems in buildings utilize them for the major risers where stress is critical.

포장 및 배송

제품 및 수량에 따라 다릅니다.,우리는 코일 링 포장을 만들 수 있습니다,롤,묶음 포장,상자 또는 상자,등.

선적:바다로,철도,항공 또는 고객의 요청으로.

회사 프로필

낙양대당에너지기술주식회사, 주식회사. 고품질 플라스틱 파이프 및 부속품을 전문으로 하는 선도적인 중국 제조업체입니다.. 최첨단 자동화 생산 라인을 갖추고 있으며 팀의 지원을 받습니다. 200 전문가, 우리는 이상으로 구성된 광범위한 제품 라인을 제공합니다. 150 급수 및 배수 시스템용으로 설계된 플라스틱 파이프 및 부속품 유형, 가스 전달, 바닥 난방 시스템. 당사의 주요 제품에는 PVC 파이프 및 피팅이 포함됩니다., 체육 (HDPE) 파이프 및 피팅, PPR 파이프 및 피팅, 및 PEX 바닥 난방 파이프.

HDPE 파이프 피팅에 대해 문의사항이 있으신가요?, 주저하지 말고 저희에게 연락해주세요!

전화번호:0086-183 3790 0677

위챗: 0086-183 3790 0677

왓츠앱: 0086-183 3790 0677

이메일: sales@pipesandfittings.net

지불 조건

티/티,보자마자 L/C,웨스턴 유니온 & 페이팔,등.

5 고밀도 폴리에틸렌 FAQ (HDPE) Water Pipes for 1.6MPa Applications

Here are five common questions about 1.6MPa HDPE water pipes:

What pressure rating does 1.6MPa HDPE pipe handle?
1.6MPa means the pipe reliably handles water pressure up to 16 술집. This equals about 232 pounds per square inch (PSI). It’s suitable for main water lines needing high pressure.

Is HDPE pipe resistant to corrosion?
예. HDPE plastic won’t rust or corrode like metal pipes. 토양이나 물에 있는 화학물질이 손상을 주지 않습니다.. This resistance means a much longer lifespan underground.

HDPE 파이프는 얼마나 오래 지속됩니까??
HDPE pipe lasts over 50 연령. Its strong plastic material withstands cracking and environmental stress extremely well. This durability reduces replacement costs significantly over time.

Where can we install 1.6MPa HDPE pipe?
Underground is the primary use. Trench installation is standard. Butt fusion welding joins sections seamlessly. This creates leak-free connections vital for high-pressure systems. Above-ground use needs specific support and protection from sunlight.

Does temperature affect the pipe’s pressure rating?
예. The 1.6MPa rating is for water at 20°C (68°F). Higher water temperatures reduce the safe working pressure. Always consult pressure derating tables for hot water applications. Cold temperatures generally don’t harm the pipe material itself.

(고밀도 폴리에틸렌 (HDPE) Water Pipes for 1.6MPa Applications)