ການວິເຄາະອຸປະກອນທໍ່ປະປາ ແລະປະເພດທໍ່

ທໍ່ລະບາຍນໍ້າ, ສໍາລັບການເຊື່ອມຕໍ່ threaded ຂອງ fittings ທໍ່ພາດສະຕິກ, ຖ້າມີການຮົ່ວໄຫຼ, ພຽງແຕ່ unscrew ມັນ, ຫໍ່ tape ດິບຈໍານວນທີ່ເຫມາະສົມປະມານກະທູ້, and then tighten it again. For the plug-in type of plastic pipe fitting, if disassembly is required, the connection can be easily unplugged and the residual glue removed. ຈາກນັ້ນ, apply polyethylene glue to the joint and reconnect as required to ensure a tight and leak-proof connection.

PE ວກິນເຂົ້າ ສupply ປipe ສສະເພາະ

There are various specifications and models of PE water supply pipes available on the market, among which common ones include: DN15 (4 inch pipe), DN20 (6 inch pipe), DN25 (1 inch pipe), DN32 (1 ນິ້ວ 2 ທໍ່), DN40 (1.5 ນິ້ວ), DN50 (2 ນິ້ວ), DN65 (2.5 ນິ້ວ), DN80 (3 ນິ້ວ), DN100 (4 ນິ້ວ), DN125 (5 ນິ້ວ), DN150 (6 ນິ້ວ), DN20 0 (8-inch pipe) and DN250 (10-inch pipe), ແລະອື່ນໆ. These different-sized PE water pipes can meet various engineering and household water demands.

ທໍ່ Fມັນ ສສະເພາະ

ອຸປະກອນທໍ່, as key components for connecting pipes, their specifications and dimensions are crucial. Common types of joints include external thread end type, ferrule type, and self-locking type, each of which has its specific usage and material. ແນວໃດກໍ່ຕາມ, regardless of the type, the division of specifications and dimensions is uniform, allowing for flexible adaptation to pipes of different diameters. ຕໍ່ໄປ, we will list the various specifications of pipe fittings in detail in table form for your reference.

National standard pipe specifications

National standard water pipes, as national standardized water pipe products, have a wide variety of specifications and models. Common specifications of national standard water pipes range from DN15 to DN200, which can meet the installation and usage requirements in different occasions and demands.

Reinforced concrete drain pipes

As an important component of the drainage system, come in a wide variety of specifications. Common standard specifications include De40, 50, 63, 75, 90, 110, 125, 160, 200, 250, 315 ແລະ 400, ແລະອື່ນໆ. These drain pipes are mainly used to handle tasks such as rainwater, ນ້ຳເສຍ, farmland irrigation and drainage, and are a key part of the drainage system. The production process requires a series of specialized equipment, such as mixing systems, pipe molds, forming equipment, ແລະອື່ນໆ, to ensure product quality and performance.

PVC ວກິນເຂົ້າ ສupply ປipe ສສະເພາະ

PVC water pipes, as an essential part of modern homes, come in a wide variety of specifications. Common household water pipe sizes range from DN15 to DN50, and these pipes are not only used in household water supply systems but also widely applied in agriculture, industry and many other fields. The production process requires strict quality control to ensure the durability and safety of the product. ໃນເວລາດຽວກັນ, knowing the actual size and purpose of different specifications of water pipes is crucial for both purchase and installation.

Detailed Explanation of PVC Water Supply pipes

PVC water pipes, as a pipe material widely used in multiple fields, come in a wide variety of specifications. Common specifications include DN15 (4-inch pipe), DN20 (6-inch pipe), DN25 (1-inch pipe), ແລະອື່ນໆ. When purchasing and installing PVC water pipes, pay attention to the markings on the pipes. ຕົວຢ່າງ, “Φ25×1/2” indicates an outer diameter of 25, while the actual nominal diameter is DN20, that is, a 6-inch pipe. Knowing the size and purpose of these specifications, as well as their compatibility with different faucets, can help you make a wise choice.

Household pipe fittings

For household water pipe joints, the common outer diameter specifications of PPR pipes in the market include ten types: 20, 25, 32, 40, 50, 63, 75, 90, 110 ແລະ 160 ມີລີແມັດ. ແນວໃດກໍ່ຕາມ, for the average home renovation, only the three specifications of 20, 25, ແລະ 32 mm are sufficient. Galvanized pipes are also a common type of household pipe, with specifications including DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80 and DN100.

PE ວກິນເຂົ້າ ສupply ປipe ມໂອເດວ

PE water pipes, as an important material for household water pipes, have a variety of model specifications to choose from. ໂດຍທົ່ວໄປ, PE water pipes are classified into three grades: PE63, PE80, ແລະ PE100. The MRS Of PE63 is 6.3MPa, while the MRS Of PE80 and PE100 are 8.0MPa and 10.0MPa respectively. Since PE63 tubing is not suitable for buried piping, PE80 or PE100 tubing is generally preferred for PE water supply pipes. Knowing this information helps to make informed choices based on actual needs.

ຜູ້ສະຫນອງ

Luoyang Datang Energy Tech Co., ຈຳກັດ. ເປັນຜູ້ຜະລິດຊັ້ນນໍາຂອງຈີນທີ່ມີຄວາມຊ່ຽວຊານໃນທໍ່ຢາງແລະອຸປະກອນເສີມທີ່ມີຄຸນນະພາບສູງ. ອຸ​ປະ​ກອນ​ທີ່​ທັນ​ສະ​ໄຫມ​ຂອງ​ສາຍ​ການ​ຜະ​ລິດ​ອັດ​ຕະ​ໂນ​ມັດ​ແລະ​ສະ​ຫນັບ​ສະ​ຫນູນ​ໂດຍ​ທີມ​ງານ​ຂອງ​ 200 ຜູ້ຊ່ຽວຊານ, ພວກເຮົາສະເຫນີສາຍຜະລິດຕະພັນຢ່າງກວ້າງຂວາງປະກອບດ້ວຍຫຼາຍກວ່າ 150 types of plastic pipes and fittings designed for water supply and drainage systems, ການສົ່ງອາຍແກັສ, ແລະລະບົບຄວາມຮ້ອນຊັ້ນ. ຜະລິດຕະພັນຕົ້ນຕໍຂອງພວກເຮົາປະກອບມີທໍ່ PVC ແລະ Fittings, PE (HDPE) ທໍ່ ແລະ Fittings, ທໍ່ PPR ແລະ Fittings, ແລະທໍ່ຄວາມຮ້ອນຊັ້ນ PEX.

ທ່ານຄວນມີຄໍາຖາມໃດໆກ່ຽວກັບທໍ່ PPR,ປ່ຽງທອງເຫລືອງແລະອຸປະກອນທອງເຫລືອງ, ກະລຸນາຢ່າລັງເລທີ່ຈະຕິດຕໍ່ຫາພວກເຮົາ!

ໂທ.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

ອີເມວ: sales@pipesandfittings.net