ພາບລວມຂອງ 3 Piece Dn10 Dn25 CF8 Thread Ball Valve

3 Piece Dn10 Dn25 CF8 Thread Ball Valve is engineered for superior performance in plumbing, ອຸດສາຫະກໍາ, ແລະຄໍາຮ້ອງສະຫມັກການຄ້າ. ຜະລິດຈາກບໍ່ມີສານຕະກົ່ວ, ທອງເຫລືອງທົນທານຕໍ່ corrosion, ປ່ຽງເຫຼົ່ານີ້ຮັບປະກັນຄວາມທົນທານຍາວນານແລະການຄວບຄຸມການໄຫຼທີ່ເຊື່ອຖືໄດ້ສໍາລັບນ້ໍາ, ອາຍແກັສ, ນ້ຳມັນ, ແລະນ້ໍາອື່ນໆ.

ດ້ວຍເຄື່ອງຈັກທີ່ມີຄວາມແມ່ນຍໍາແລະການກໍ່ສ້າງທີ່ເຂັ້ມແຂງ, ປ່ຽງທອງເຫລືອງຂອງພວກເຮົາສະຫນອງການດໍາເນີນງານທີ່ລຽບງ່າຍ, ການຜະນຶກທີ່ດີເລີດ, ແລະຄວາມທົນທານຕໍ່ຄວາມກົດດັນສູງ - ເຮັດໃຫ້ມັນເຫມາະສົມສໍາລັບທີ່ຢູ່ອາໄສ, ການຄ້າ, ແລະລະບົບທໍ່ອຸດສາຫະກໍາ.

Key Features of 3 Piece Dn10 Dn25 CF8 Thread Ball Valve

ການກໍ່ສ້າງທອງເຫຼືອງລະດັບພຣີມຽມ – ບໍ່ມີສານຕະກົ່ວ, ທົນທານຕໍ່ການກັດກ່ອນ, ແລະທົນທານ

ການ​ອອກ​ແບບ​ການ​ຮົ່ວ​ໄຫລ - ປະ​ທັບ​ຕາ​ແຫນ້ນ​ສໍາ​ລັບ​ການ​ຄວບ​ຄຸມ​ນ​້​ໍ​າ​ທີ່​ປອດ​ໄພ​

ຄວາມກົດດັນສູງ & ຄວາມຕ້ານທານອຸນຫະພູມ - ການປະຕິບັດທີ່ເຊື່ອຖືໄດ້ພາຍໃຕ້ເງື່ອນໄຂທີ່ຕ້ອງການ

ການ​ປະ​ຕິ​ບັດ​ກ້ຽງ - ຈັບ​ທີ່​ຈະ​ຫັນ​ງ່າຍ​ສໍາ​ລັບ​ການ​ປັບ​ການ​ໄຫຼ​ທີ່​ຊັດ​ເຈນ​

ຄໍາຮ້ອງສະຫມັກອະເນກປະສົງ - ເຂົ້າກັນໄດ້ກັບນ້ໍາ, ອາຍແກັສ, ນ້ຳມັນ, ແລະລະບົບ HVAC

ຫຼາຍຂະໜາດ & ຕົວເລືອກການເຊື່ອມຕໍ່ – ມີຢູ່ໃນ¼” ເຖິງ 2″ ຂະໜາດ (NPT, ກະທູ້ BSP)

(3 Piece Dn10 Dn25 CF8 Thread Ball Valve)

Specification of 3 Piece Dn10 Dn25 CF8 Thread Ball Valve

This 3-piece ball valve comes in two sizes: DN10 (about 3/8 ນິ້ວ) and DN25 (about 1 ນິ້ວ). It features threaded connections for simple installation. The valve body uses CF8 stainless steel. This material resists rust. It handles tough conditions well.

The valve design uses three main pieces. Two end pieces connect to the pipe. The center piece holds the ball. This design allows easy cleaning. Maintenance is straightforward. You can take it apart without removing the whole valve from the pipe system.

ພາຍໃນ, a polished ball controls the flow. Turn the handle 90 ອົງສາ. The ball rotates. It opens or shuts off the flow fast. The ball moves smoothly. The valve seals reliably. Leaks are prevented.

Seals use PTFE (Teflon). PTFE seats surround the ball. PTFE seals well. It handles heat. ມັນທົນທານຕໍ່ສານເຄມີ. The seals last a long time. ເຂົາເຈົ້າຕ້ອງການການດູແລພຽງເລັກນ້ອຍ.

The valve works under pressure. It handles PN40 ratings. This means 40 bar pressure at room temperature. Temperature limits are important. The valve handles -20°C to +180°C normally. PTFE seals define the max temperature. Check exact specs for your fluid.

Operation uses a simple lever handle. The lever shows the valve position clearly. Open is parallel to the pipe. Closed is perpendicular. You see the status instantly. A sturdy stem connects the lever to the ball. The stem won’t blow out under pressure.

These valves fit many applications. Use them for water. Use them for air. Use them for oil. Use them for steam. Use them for general chemicals. They work well in factories. They work well in processing plants. They work well in building systems. They work well where reliable shut-off matters.

(3 Piece Dn10 Dn25 CF8 Thread Ball Valve)

ຄໍາຮ້ອງສະຫມັກຂອງ 3 Piece Dn10 Dn25 CF8 Thread Ball Valve

Here’s the content about those ball valves:

People use these 3-piece ball valves a lot in factories and pipes. They come in small sizes, DN10 and DN25. That means about 10mm and 25mm across the pipe opening. The valves are made from CF8 stainless steel. This material fights rust well. It handles many chemicals. It also stands up to heat. You see these valves with threaded ends. This makes connecting them to pipes easy. Screw them on directly. No special flanges are needed.

These valves control flow. Turn the handle 90 ອົງສາ. The ball inside spins. This opens or shuts off liquid or gas fast. They work reliably for on/off jobs. Don’t use them much for fine flow control. The full-port design helps. It means the hole through the ball is big. Almost as big as the pipe itself. This reduces pressure loss. Stuff flows through easily.

Their tough CF8 build suits harsh places. Chemical plants need valves like this. They resist acids and bases. Water treatment uses them too. They handle clean water, maybe some wastewater. Food and drink factories pick them. Stainless steel is easy to clean. It meets hygiene rules. You find them in general industrial pipes. They move air, steam, or mild fluids.

The 3-piece design is smart. You can take the middle section out. This lets you fix the seals or ball easily. You don’t take the whole valve off the pipe. This saves time and work during upkeep. It cuts down on maintenance trouble.

These valves handle decent pressure. Check the exact rating for your job. They are strong but not for extreme force. Their compact size fits tight spots. The threaded ends simplify installation. You don’t need complex tools.

ການຫຸ້ມຫໍ່ແລະການຂົນສົ່ງ

ຂຶ້ນກັບຜະລິດຕະພັນແລະ qty,ພວກເຮົາສາມາດເຮັດໃຫ້ການຫຸ້ມຫໍ່ຂອງ coiling ໄດ້,ມ້ວນ,ການຫຸ້ມຫໍ່ມັດ,crates ຫຼືກ່ອງ,ແລະອື່ນໆ.

ການຂົນສົ່ງ:ໂດຍທະເລ,ທາງລົດໄຟ,ທາງອາກາດຫຼືຕາມຄໍາຮ້ອງຂໍຂອງລູກຄ້າ.

ຂໍ້ມູນບໍລິສັດ

Luoyang Datang Energy Tech Co., ຈຳກັດ. ເປັນຜູ້ຜະລິດຊັ້ນນໍາຂອງຈີນທີ່ມີຄວາມຊ່ຽວຊານໃນທໍ່ຢາງແລະອຸປະກອນເສີມທີ່ມີຄຸນນະພາບສູງ. ອຸ​ປະ​ກອນ​ທີ່​ທັນ​ສະ​ໄຫມ​ຂອງ​ສາຍ​ການ​ຜະ​ລິດ​ອັດ​ຕະ​ໂນ​ມັດ​ແລະ​ສະ​ຫນັບ​ສະ​ຫນູນ​ໂດຍ​ທີມ​ງານ​ຂອງ​ 200 ຜູ້ຊ່ຽວຊານ, ພວກເຮົາສະເຫນີສາຍຜະລິດຕະພັນຢ່າງກວ້າງຂວາງປະກອບດ້ວຍຫຼາຍກວ່າ 150 ປະເພດຂອງທໍ່ພາດສະຕິກແລະ fittings ອອກແບບສໍາລັບການສະຫນອງນ້ໍາແລະລະບົບລະບາຍນ້ໍາ, ການສົ່ງອາຍແກັສ, ແລະລະບົບຄວາມຮ້ອນຊັ້ນ. ຜະລິດຕະພັນຕົ້ນຕໍຂອງພວກເຮົາປະກອບມີທໍ່ PVC ແລະ Fittings, PE (HDPE) ທໍ່ ແລະ Fittings, ທໍ່ PPR ແລະ Fittings, ແລະທໍ່ຄວາມຮ້ອນຊັ້ນ PEX.

ທ່ານຄວນມີຄໍາຖາມໃດໆກ່ຽວກັບທໍ່ HDPE Fitting, ກະລຸນາຢ່າລັງເລທີ່ຈະຕິດຕໍ່ຫາພວກເຮົາ!

ໂທ.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

ອີເມວ: sales@pipesandfittings.net

ເງື່ອນໄຂການຈ່າຍເງິນ

T/T,L/C ຢູ່ໃນສາຍຕາ,Western Union & Paypal,ແລະອື່ນໆ.

5 FAQs ຂອງ 3 Piece Dn10 Dn25 CF8 Thread Ball Valve

What material is the valve made from?
This valve uses CF8 stainless steel. CF8 is a common stainless steel grade. ມັນຕ້ານ rust ໄດ້ດີ. It handles many chemicals safely. This material is strong and lasts a long time.

What pressure can this valve handle?
Check the valve’s nameplate for its exact rating. Generally, DN10 and DN25 CF8 threaded ball valves handle pressures up to 1000 PSI. This depends on the temperature. Always confirm the rating for your specific use.

How hot or cold can the fluid be?
CF8 stainless steel works well in many temperatures. Typically, these valves handle fluids from -20°F (-29°C) up to 400°F (204°C). Extreme temperatures might need special seals. Verify the limits for your application.

Is the valve easy to fix?
ແມ່ນແລ້ວ, the 3-piece design makes repairs simple. You can take the valve body apart. You don’t need to remove the whole valve from the pipes. This lets you replace seals or the ball easily. It saves time and money.

How do I connect this valve to pipes?
This valve has threaded connections. The ends have standard pipe threads. You screw them directly into matching threaded pipe fittings. Make sure the threads are clean. Use thread sealant for a tight, leak-free connection.

(3 Piece Dn10 Dn25 CF8 Thread Ball Valve)