Пӧрт да промышленный ППР труба монтаж ручка

Вӱд пуч системым уэмдыме тӱнямбал толкынышто, ППР (случайный сополимер полипропилен) труба-влак are gradually replacing traditional metal pipes with their high temperature resistance, corrosion resistance and zero leakage characteristics. As a professional exporter who has been working in the pipeline industry for 10 курым, Let us reveals the PPR pipe standard installation process for you to help you create a reliable pipeline system with 50 years of maintenance free.

Икымше,Industrial and Home use ППР Пipeline ИКdvantages (Required reading before construction)

1. Материал Cхарактеристике

Operating temperature range: -20 ° C гыч 95 ° C (better than the upper limit of 60 ° C of PVC pipe)

Сжатий пеҥгыдылык: 2.5MPa at 20℃ environment (through ISO 9001 сертификаций)

Sanitary rating: NSF/ANSI 61 Drinking water system certification

2. Economic Cтаҥастаре

Type of pipeline	Installation cost	Maintenance cycle	Паша жап
Оцинкованный полат труба	кукшо	3-5 курым	15 курым
Copper pipe	Extremely high	8-10 курым	25 курым
ППР трубка	Кыдалаш	Maintenance-free	50 курым

Professional grade PPR tube installation 7-step method

Ошкыллан 1: Accurate mapping and cutting

Use a laser rangefinder to ensure ±2mm accuracy

Cutting tool selection:

Rotary cutter (DN20-DN63 pipe diameter)

Electric pipe cutter (DN75 + large diameter pipe)

Ошкыллан 2: Key technologies of hot melt welding 

Temperature control: 260±5℃ (equipped with digital temperature control welding machine)

Heating time reference table:

Трубан диаметрже (мм)	Heating time (s)	Engaging time (s)	Cooling time (min)
20	5	4	2
32	8	6	4
63	24	8	6

Ошкыллан 3: Pipe fixing points

Pipe clamp spacing standard:

Horizontal pipe: DN20 pipe @600mm

Vertical tube: DN32 tube @1200mm

304 stainless steel spring clamps are recommended

5 Solutions to common installation problems 

1. Virtual welding problem diagnosis

Cause: pipe/fittings are not clean, insufficient heating time

Rapid detection method: 30° bending test after welding

2. Winter construction precautions

When the ambient temperature is < 5℃, the cooling time is extended by 50%

Use [brand name] low temperature special PPR tube (glass transition temperature -15℃)

3. Lintel sleeve installation specifications

Casing diameter ≥ pipe outer diameter +20mm

Fill with flexible flame retardant material for seal

4.Пrofessional tool set recommended 

Intelligent temperature control welding machine: with temperature compensation function

Multifunctional pipe cutter: Support 20-110mm full specification

Pipe detector: can measure the depth of welding penetration

5.How to choose PPR pipeline? 

1. High quality raw materials

The Nordic chemical RA130E raw material is used, the ash content is < 0.02%

2. Global certification system

It has obtained 28 international certifications such as CE, WRAS and SGS

Поставщик

Луоян Датанг Энерджи Тех Ко., ООО. — китайысе вӱдышӧ производитель, тудо кӱкшӧ качестван пластика труба ден арматурым ыштен луктеш. Кызытсе автоматизироватлыме производствын линийже дене пойдаралтын да команде полшымо дене 200 профессионал-влак, ме кумда продукт линийым темлена, тудо утларак 150 types of plastic pipes and fittings designed for water supply and drainage systems, газым колтымо, да леведышым шокшо системе-влак. Мемнан тӱҥ продукцийна тыгай ПВХ труба ден ӱзгар-влак, ПЭ (HDPE) Труба ден ӱзгар-влак, ППР труба ден ӱзгар-влак, да PEX леведышым шокшо труба-влак. 

Мемнан шотышто йодышда уло гын Таза ППР труба ден ӱзгар-влак, пожалуйста, мемнан дене кылым кучаш ида вожыл!

Тел.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Ватсап: 0086-183 3790 0677

Электрон почто: [email protected]