Обзор 3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме

3/8 X ДЕЧ 1/2 NPT Brass Compression Union Tube Fitting provides reliable, тендан чыла сантехнике да ОВК системе кӱлешлыклан кужу жаплан лийше подключение. Свинец деч посна ыштыме, дезинцификацийлан чытыше латунь сплав, тиде ӱзгар-влак паша лектыш да лӱдыкшыдымылык шотышто пеҥгыде отрасль стандартлан келшен толыт. Илыме да коммерческий приложенийлан келшен толеш, мемнан латунный ӱзгар-влак лӱдыкшыдымӧ ыштат, вӱд пуч линийлаште утечка деч аралыме ушнымаш-влак, газ системе-влак, да сжатый воздух монтаж-влак.

Тӱҥ ойыртемже-влак 3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме

Премиум материал – Свинец деч посна, DZR латунь коррозий деч аралалтме
Лӱдыкшыдымӧ подключение – Утечка деч аралыме уплотнитель-влаклан рашлык резьбыже
Температур чытыше – Шокшолан келшен толеш & йӱштӧ вӱд системе-влак
Универсал приложений-влак – Кӱртньӧ дене пашам ышта, PEX, да ПВХ труба-влак
Сертифицироватлыме качестве – NSF/ANSI 61 & 372 йӱмӧ вӱдлан сертифицироватлыме
Икмыняр конфигураций – локтылалтше, тройник, муфто-влак, адаптер-влак улыт

(3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме)

Спецификаций-влак 3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме

This brass compression union fitting signs up with 2 3/8 inch outside diameter tubes. It connects them utilizing conventional 1/2 inch National Pipeline Thread Taper (НПТ) ends. This suitable gives a safe and secure, watertight seal between tubing and threaded ports. It works without needing unique tools for the tube links.

The suitable body is strong brass. Brass uses good strength and resists corrosion well. It deals with usual fluids like water, южышт, ӱй, and fuel. The material executes reliably in numerous commercial and plumbing scenarios. Brass is resilient for lasting use.

Лийшаш 3/8 inch OD compression side approves conventional tubing. The compression nut and ferrule produce the seal on the tube. Tightening the nut squeezes the ferrule onto the tube. This activity creates a solid, tight link. Тудо утечка-влакым сеҥен чара. The ferrule holds the tube firmly.

Лийшаш 1/2 inch NPT ends feature standard tapered pipeline strings. These strings screw into matching women NPT ports. Teflon tape or pipe sealer is utilized on the strings. This guarantees a limited seal versus leaks at the threaded joint. The strings satisfy market requirements.

Монтаж тыглай. Cut the tubing cleanly and squarely. Move the compression nut onto television first. Then move the brass ferrule onto television. Put the tube end fully right into the fitting body. Hand-tighten the compression nut. Пытартыш, tighten the nut additionally with a wrench. Do this till it feels snug. Stay clear of over-tightening. Over-tightening can damage the ferrule or tube. Link the NPT ends to the threaded ports securely. Usage sealant on the strings.

This fitting creates an irreversible connection point. It allows very easy disconnection of tubes later if needed. The union design allows you separate the tubing without turning it. This is useful for upkeep or modifications. The brass building takes care of modest stress and temperature level. It provides dependable service.

(3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме)

Приложений-влак 3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме

This brass compression union attaches 3/8 inch outside diameter tubing to a 1/2 inch women NPT pipeline string. It joins various pipe kinds. Utilize it in several pipes and mechanical systems. It makes dependable links without needing pipe threads cut or flared. The suitable works utilizing compression seals. Slide the compression nut onto the tubing. Insert the tubes right into the fitting body. Tighten up the nut. This squeezes the brass ferrule versus the tube. Тудо виян, утечка деч аралыме уплотнитель. The other end screws straight into a 1/2 inch NPT female port. This prevails on valves, насос-влак, or equipment ports.

Brass material handles water, южышт, ӱй-влак, and fuels well. It stands up to deterioration. This suitable matches reduced to medium pressure applications. It mounts rapidly. No unique tools are required past wrenches. Technicians locate it very easy to utilize. It saves time compared to soldering or threading pipe. Обслуживатлымаш куштылго. Loosen up the compression nut to disconnect the tube. Re-tighten to reconnect. Change the ferrule if needed after disassembly.

Discover this fitting in water lines for home appliances. It links ice manufacturers or fridges. It operates in hydronic heater signing up with copper tubing to central heating boiler valves. Use it in compressed air lines linking tubing to regulators or devices. It connects gas lines in oil burners or small engines. It fixes instrumentation lines carrying gases or liquids to gauges. It connects coolant lines in commercial equipment. Anywhere you require to transition from little tubing to a standard pipe thread, this installation is a functional option. Its integrity originates from the simple compression style. Brass construction makes certain resilience. It offers a functional link point.

Упаковочный да колтымо

Продукций да кугыт деч шога,ме ыштен кертына ыле упаковочный катушка,ролл-влак,пакетым оптымаш,ящик але яшлык,да т. д..

Колтымаш:Теҥыз дене,кӱртньыгорно,авиаций дене але клиентын йодмыж почеш.

Компанийын профильже

Луоян Датанг Энерджи Тех Ко., ООО. — китайысе вӱдышӧ производитель, тудо кӱкшӧ качестван пластика труба ден арматурым ыштен луктеш. Кызытсе автоматизироватлыме производствын линийже дене пойдаралтын да команде полшымо дене 200 профессионал-влак, ме кумда продукт линийым темлена, тудо утларак 150 вӱд пуч да дренаж системылан ыштыме пластика труба ден арматурын типше-влак, газым колтымо, да леведышым шокшо системе-влак. Мемнан тӱҥ продукцийна — ПВХ Труба ден Арматурым, ПЭ (HDPE) Труба ден ӱзгар-влак, ППР труба ден ӱзгар-влак, да PEX леведышым шокшо труба-влак.

HDPE труба монтаж шотышто йодышда уло мо, пожалуйста, мемнан дене кылым кучаш ида вожыл!

Тел.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Ватсап: 0086-183 3790 0677

Электрон почто: sales@pipesandfittings.net

Тӱлымӧ условий

Т/Т,L/C ужмо годым,Вестерн Юнион & Paypal,да т. д..

5 FAQ-влак 3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме

Продукт: 3/8″ OD x 1/2″ НПТ латунь компрессий ушем труба келыштарыме

Йодыш-влак:

What tubes work with this fitting?
This fitting connects standard 3/8 inch outside diameter (НЫН) tubing. The tubing material must be compatible. Common choices are copper, aluminum, nylon, полиэтилен, or polybutylene tubing. Avoid using hard stainless steel tubing. The compression design grips the tube’s outer surface.

Могай давленийым тудо чытен кертеш?
This brass fitting handles significant pressure. Its maximum working pressure rating is typically 1,000 PSI with water at room temperature. Actual pressure limits depend on the specific tubing used. Always check your tubing’s pressure rating. The rating also depends on temperature and the fluid being carried. Higher temperatures usually mean lower pressure limits.

Кузе тудым шындаш?
Икымше, slide the compression nut onto the tube. Then slide the compression ferrule (brass ring) onto the tube. Insert the tube end fully into the fitting body. Make sure the tube is straight. Hand-tighten the compression nut onto the fitting body. Пытартыш, tighten the nut about one to one-and-a-half turns more using a wrench. Пеш ида пеҥгыдемде. Over-tightening can crush the ferrule or tube, causing leaks.

Can I reuse this fitting?
Reusing this fitting is possible but not recommended. The ferrule compresses tightly onto the tube during initial installation. This creates a permanent seal. Removing the tube often distorts the ferrule. Using the same ferrule again usually results in leaks. For best results, always use new ferrules. Reuse the nut and fitting body only with a new ferrule.

How does it seal?
The seal happens through compression. Tightening the nut squeezes the ferrule against the tube. The ferrule also presses against the fitting body. This creates a tight mechanical grip. It also forms a leak-proof seal between the ferrule, the tube, and the fitting body. No thread sealant is needed on the compression side. Apply thread sealant only to the male NPT threads.

(3/8 X ДЕЧ 1/2 НПТ латунь компрессий ушем труба келыштарыме)