Pengenalan kepadaPolipropilena Electrofusion Coupler Electro Fusion PPR Fittings

paip PPR (nama penuh Paip Kopolimer Rawak Polipropilena, ialah paip plastik berprestasi tinggi yang diperbuat daripada bahan mentah polipropilena kopolimer rawak berkualiti tinggi. Oleh kerana rintangan suhu yang tinggi, rintangan tekanan, perlindungan alam sekitar dan bukan toksik, ia digunakan secara meluas dalam membina sistem air panas dan sejuk, Kejuruteraan HVAC, pengangkutan air minuman dan penghantaran cecair industri, dan merupakan pengganti ideal untuk paip logam tradisional.

Characteristics and Features of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Suhu tinggi dan rintangan tekanan tinggi

Suhu kerja jangka panjang boleh mencapai 70°C, rintangan suhu tinggi jangka pendek hingga 95°C, prestasi galas tekanan yang sangat baik (aras tekanan biasa PN20, PN25).

Perlindungan dan kesihatan alam sekitar

Bahan mentah adalah tulen dan tidak toksik, memenuhi piawaian air minuman (seperti FDA, EN ISO dan pensijilan lain), jangan membiak bakteria, dan memastikan keselamatan kualiti air.

Kakisan dan anti penskalaan

Rintangan asid dan alkali, rintangan kakisan kimia yang kuat, dinding dalaman licin, bukan senang nak skali, penggunaan jangka panjang aliran stabil.

Sambungan cair panas, pengedap yang kuat

Mengguna pakai teknologi soket cair panas, tiada risiko kebocoran pada sambungan, dan struktur bersepadu meningkatkan kebolehpercayaan sistem.

Ringan dan mudah dibina

Beratnya sahaja 1/8 daripada paip logam, yang mudah untuk pengangkutan dan pemasangan, mengurangkan kos buruh.

Kehidupan yang panjang dan penyelenggaraan yang rendah

Hayat perkhidmatan yang direka adalah lebih daripada 50 tahun, bebas penyelenggaraan, dan kos keseluruhan adalah rendah.

Penjimatan tenaga dan pemeliharaan haba

Kekonduksian terma adalah rendah (sahaja 1/200 daripada paip logam), yang mengurangkan kehilangan haba dan sesuai untuk sistem air panas.

(Polipropilena Electrofusion Coupler Electro Fusion PPR Fittings)

Specifications of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Polypropylene Electrofusion Coupler fittings connect PPR pipes securely. They use electrofusion technology for strong joints. The fittings are made from polypropylene. This material resists chemicals well. It handles high temperatures too. Electrofusion works with built-in heating wires. Apply electric current to the wires. The heat melts the polypropylene. The pipe and fitting fuse together. The joint cools into a solid bond. This joint is leak-proof. It matches the pipe strength. These couplers come in standard sizes. Saiz biasa ialah 20mm, 25mm, 32mm, 40mm, 50mm, 63mm. Penarafan tekanan termasuk PN10, PN16, PN20. PN20 supports 20 tekanan bar pada 20°C. They handle temperatures from 0°C to 95°C. Short-term peaks up to 110°C are acceptable. The fittings meet international standards. ISO 15874 and DIN 8077/8078 apply. This ensures reliability and safety. Use these couplers in plumbing systems. They work for hot water lines. Cold water applications suit them too. Heating systems like radiators use them. Industrial fluid transport benefits from them. Electrofusion offers clear advantages. Joints are permanent and uniform. Pemasangan adalah mudah. You need an electrofusion machine. Clean the pipe ends first. Insert the pipe into the coupler. Connect the machine leads. Input the correct fusion parameters. Start the fusion cycle. The machine controls heating time. It signals when fusion finishes. Cool the joint naturally. Proper installation prevents failures. Follow the manufacturer guidelines exactly. This ensures system longevity. These fittings save time during projects. They reduce maintenance needs later.

(Polipropilena Electrofusion Coupler Electro Fusion PPR Fittings)

Applications of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Polypropylene electrofusion couplers join PPR pipes securely. They use electricity for the connection. Heat melts the plastic inside the coupler. The melted plastic fuses the pipe ends together. This creates one solid piece. Sendi menjadi sangat kuat. It is leak-proof. Electrofusion is reliable for joining pipes.

These fittings work well in many places. They connect pipes in hot and cold water systems. People use them in homes. They connect pipes under floors or inside walls. Builders install them in apartment blocks. Factories rely on them for process lines. They are good for chemical transport. These couplers handle industrial fluids safely. They are common in irrigation projects for farms. Municipal water supply networks use them extensively. Gas distribution systems also employ these fittings.

Pemasangan adalah mudah. Prepare the pipe ends first. Potong paip dengan bersih. Remove any burrs. Measure the insertion depth carefully. Mark this depth on the pipe. Clean the pipe surface thoroughly. Scrape off the outer layer lightly. Wipe the area with a clean cloth. Avoid any grease or dirt. Position the coupler over the pipe ends. Align the pipes correctly inside it. Clamp the assembly firmly. Connect the electrofusion machine. Follow the machine’s instructions exactly. Enter the correct fusion parameters. Start the fusion cycle. The machine sends power to the coupler’s coil. The coil heats up. The plastic melts and fuses. Wait for the cooling time. Do not disturb the joint during cooling. Disconnect the machine after the cycle finishes. Check the joint visually. Ensure a proper bead forms around the pipe ends. This bead confirms good fusion. Always disconnect power before touching the coupler post-fusion.

Pembungkusan dan Penghantaran

Bergantung pada produk dan kuantiti,kita boleh membuat pembungkusan gegelung,gulung,pembungkusan berkas,peti atau kotak,dll.

Penghantaran:Melalui laut,kereta api,melalui udara atau sebagai permintaan pelanggan.

Profil Syarikat

Luoyang Datang Energy Tech Co., Ltd. ialah pengeluar terkemuka China yang mengkhusus dalam paip dan kelengkapan plastik berkualiti tinggi. Dilengkapi dengan barisan pengeluaran automatik terkini dan disokong oleh sepasukan 200 profesional, kami menawarkan barisan produk yang luas yang terdiri daripada lebih 150 jenis paip plastik dan kelengkapan yang direka untuk bekalan air dan sistem saliran, penghantaran gas, dan sistem pemanasan lantai. Produk utama kami termasuk Paip PVC dan Kelengkapan, PE (HDPE) Paip dan Kelengkapan, Paip dan Kelengkapan PPR, dan Paip Pemanas Lantai PEX.

Sekiranya anda mempunyai sebarang pertanyaan mengenai Pemasangan Paip HDPE, sila jangan teragak-agak untuk menghubungi kami!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

E-mel: sales@pipesandfittings.net

Syarat Pembayaran

T/T,L/C pada pandangan,Western Union & Paypal,dll.

5 FAQs of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

What is a Polypropylene Electrofusion Coupler?
It’s a special fitting for joining PPR pipes. The coupler has built-in heating wires. You connect it using an electrofusion machine. Ini mewujudkan yang kuat, permanent bond between pipes.

How does the Electrofusion process work?
Pertama, clean and trim the pipe ends. Insert them into the coupler. Connect the electrofusion machine to the coupler’s terminals. The machine sends electricity. This melts the inside of the coupler and the pipe surface. The melted material fuses together. After cooling, it forms a solid joint.

What are the main advantages of Electrofusion PPR fittings?
They are very reliable. The fusion is leak-proof. Pemasangan adalah pantas. It needs less equipment than traditional welding. These fittings work well in tight spaces. They handle high pressure and temperature.

Where are Electrofusion Couplers used?
Mainly in plumbing and heating systems. Mereka bekerja untuk saluran air panas dan sejuk. You see them in industrial pipes, chemical transport, and fire safety systems. They are good for repairs or new projects.

What safety steps are important during installation?
Always follow the manufacturer’s guide. Wear protective gloves and glasses. Make sure pipes are clean and dry. Check the electrofusion machine settings. Do not move pipes during cooling. Test the joint after installation.

(Polipropilena Electrofusion Coupler Electro Fusion PPR Fittings)