Hva er forskjellene mellom PE-rør og HDPE-rør?

The difference between HDPE rør and PE pipes is a question that is often asked. Det virker enkelt, men få mennesker forklarer det tydelig. Here we will systematically introduce it to you.

PE pipes are Polyethylene plastic pipes. Som den mest grunnleggende plasttypen, PE has excellent resistance to most household and industrial chemicals. Common plastic bags, cling film, osv. are all made of PE.

PE pipes as a whole can be classified into three types: low-density polyethylene pipes (LDPE pipes), medium-density polyethylene pipes (MDPE pipes), and high-density polyethylene pipes (HDPE rør).

1. Low density polyethylene (abbreviated as LDPE)

Low-density polyethylene is generally produced by high-pressure polymerization with a density of 0.9910 -0.925g/cm³. The molecular structure of low-density polyethylene is a linear macromolecule with many side chains. The side chains of different lengths on the main chain affect the regularity of the macromolecule arrangement, and the stacking is not tight, which hinders the crystallization of polyethylene. Derfor, the crystallinity is 55% -65%. Low-density polyethylene has a low melting point and a soft texture. The long side chains give it low viscosity at high shear rates during processing and high melt strength during stretching, making it very suitable for the blown film process and mainly used in the production of agricultural films, heavy packaging films, osv.

2. Medium-density polyethylene (MDPE for short)

Medium-density polyethylene (MDPE) is controlled in density by A-olefin copolymerization at medium and low pressures using an efficient catalyst

(0.926-0.940q/cm3), with a crystallinity of 70%-80%. Due to its numerous and long side chains, density and crystallinity decrease, medium-density polyethylene has better flexibility and low-temperature properties, and its tensile strength, hardness, thermal properties, osv. are inferior to those of high-density polyethylene. Due to the fact that copolyolefin can increase the intergranular linking chains of the crystal sheets of medium-density polyethylene, its resistance to slow cracking and long-term retention of mechanical strength are greatly improved compared to LDPE. Medium-density polyethylene can be used in the production of pressure pipes, delivery pipes, various containers and packaging films.

3. High-density Polyethylene (HDPE for short)

Polyetylen med høy tetthet (HDPE) is produced by a low-pressure polymerization process, is linear, has a density of 0.94-0.965q/cm ³, has a crystallinity of 80%-95%, and is a white powder or granule. Compared with low-density polyethylene, it has fewer other sub-chains, a nearly linear structure, regular and close-packed molecules, and thus has high crystallinity, high density, relative molecular mass ranging from hundreds of thousands to hundreds of thousands, and a narrow range of melt flow rates. High density polyethylene has high rigidity and toughness, good mechanical strength and heat resistance, as well as good resistance to deep agents and steam penetration. High-density polyethylene has the lowest permeability among all types of polyethylene, the strongest corrosion resistance, and good rigidity, and is mainly used in the production of various pressure pipes, injection molded products, osv.

HDPE pipe is a type of PE pipe, but the performance of HDPE pipe is superior to that of ordinary PE pipe, which we can summarize as follows:

1, Different pressure resistance:

• HDPE pipes must be able to withstand certain pressures, and usually a high molecular weight and good mechanical properties PE resin is chosen, such as HDPE resin, which is nine times stronger than ordinary polyethylene pipes (PE-rør);

2, the wear resistance is different

• Among all engineering plastics, HDPE has the best abrasion resistance. The higher the molecular weight, the more wear-resistant the material is, even more than many metal materials (such as carbon steel, rustfritt stål, bronse, osv.) the abrasion resistance of common PE is only one-tenth of that of HDPE;

3, Different uses

• General PE pipes (medium-density polyethylene pipes) are suitable for transporting gaseous artificial gas, naturgass, flytende petroleumsgass, while low-density polyethylene pipes are flexible tubes;
• HDPE rør (polyetylenrør med høy tetthet) are mainly used for transporting natural gas, municipal engineering water supply systems, indoor water supply systems of buildings, outdoor buried water supply systems and buried water supply systems in residential areas and factories, old pipeline repair, water treatment engineering pipeline systems, and industrial water pipes in gardens, irrigation and other fields.
• HDPE rør can be used as a replacement for traditional steel pipes and polyvinyl chloride drinking water pipes, which ordinary PE pipes cannot.

4，Different connection methods:

• General PE pipes, especially LDPE and MDPE, are often connected using mechanical fittings or quick-connect joints, which are convenient for flexible tubing and low-pressure applications.
• HDPE rør, på den annen side, are widely recognized for their compatibility with heat fusion technology. Butt fusion and electrofusion create a seamless joint that is as strong as the pipe itself, ensuring a completely leak-proof system for high-pressure water and gas transmission.

5，Cost and economic value:

While general PE materials are generally cheaper and widely used in packaging and low-stress environments, HDPE pipes offer a higher initial investment but deliver exceptional long-term value.,

Due to their superior durability, lower maintenance needs, and extended lifespan, HDPE pipes significantly reduce replacement and operational costs over decades of use, making them highly cost-effective for major infrastructure projects.

PE pipe and HDPE pipe connection methods comparison including mechanical fittings and heat fusion technology

Leverandør

Luoyang Datang Energy Tech Co., Ltd. er en ledende kinesisk produsent som spesialiserer seg på høykvalitets plastrør og -fittings. Utstyrt med state-of-the-art automatiserte produksjonslinjer og støttet av et team av 200 fagfolk, vi tilbyr en omfattende produktlinje som omfatter over 150 types of plastic pipes and fittings designed for water supply and drainage systems, gassoverføring, og gulvvarmesystemer. Våre hovedprodukter inkluderer PVC-rør og fittings, PE (HDPE) Rør og beslag, PPR rør og fittings, og PEX gulvvarmerør.

Skulle du ha noen spørsmål angående PVC-rør & PE-rør i landbruksvanning, ikke nøl med å kontakte oss!

• Tlf.:0086-183 3790 0677
• Wechat: 0086-183 3790 0677
• Whatsapp: 0086-183 3790 0677
• E-post: sales@pipesandfittings.net