Rura PE kontra rura PVC w nawadnianiu rolniczym: Analiza porównawcza

Wraz ze wzrostem zapotrzebowania na efektywne oszczędzanie wody w nowoczesnym rolnictwie, Kluczem stały się naukowe projekty systemów nawadniających i dobór materiałów, z których wykonane są rurociągi. As the core components of agricultural irrigation, PE (polietylen) kobza and PVC (polichlorek winylu) pipes are widely used because of their performance advantages. This paper will deeply analyze the specific application scenarios, specifications and selection suggestions of the two materials in agricultural irrigation, to help users optimize the design of irrigation system.

PE Pipe in Agricultural Irrigation AzastosowanieS & Pparametry

Due to its flexibility, corrosion resistance and low temperature resistance, PE pipes are widely used in the following scenarios:

Drip irrigation systems: PE pipes can achieve precise irrigation through microholes or drippers, especially suitable for cash crops such as fruit trees and vegetables.

Mobile sprinkler irrigation: The lightweight PE pipe is easy to disassemble and assemble, suitable for seasonal irrigation or temporary water supply needs.

Buried underground irrigation: PE pipe is resistant to soil chemical corrosion, suitable for long-term buried use, reduce the risk of pipeline aging.

Hilly and complex terrain: its flexibility can adapt to terrain fluctuations, reduce the use of connectors, reduce the probability of water leakage.

Rura PE w nawadnianiu rolniczym Specyfikacje &Models

PE pipe specifications commonly used in agricultural irrigation are divided according to pressure grade and pipe diameter:

Pressure rating: PN6 (0.6MPa), PN8 (0.8MPa), PN10 (1.0MPa), suitable for scenarios with different water pressure requirements.

Pipe diameter range: DN16mm to DN315mm, of which DN50mm-DN160mm is the mainstream model for agricultural irrigation.

Standard reference: in line with GB/T 13663.2-2018 “Polietylen (PE) pipe system for water supply” standard, to ensure pressure resistance and environmental protection performance.

Advantages of PE Pipe in Agricultural Irrigation

Low temperature resistance (-20℃ ~ 40 ℃), suitable for cold areas.

Flexible and easy to lay, low construction cost.

Strong impact resistance and service life of up to 50 lata.

PCV Pipe in Arolniczy Irrigation Application & Pparametry

PVC pipe is known for its high strength and low cost, and is mainly used in:

Trunk water pipeline: The rigid structure is suitable for long distance and large flow water transmission, such as the laying of the main pipe from the reservoir to the field.

Fixed sprinkler irrigation system: through flange or adhesive connection, high stability, suitable for large-scale farmland.

Open channel replacement project: PVC pipe can replace the traditional earth channel, reduce leakage, improve the efficiency of water transmission.

Irrigation inside the greenhouse: gładka powierzchnia, niełatwe do skalowania, suitable for humidity control needs in the greenhouse.

PCV Pipe in Arolniczy Irrigation Dane techniczne & Models

PVC pipe for agricultural irrigation should meet the following parameter standards:

Nominal pressure: 0.6MPa, 0.8MPa, 1.0MPa, corresponding to different wall thicknesses (such as Φ110mm pipe wall thickness of 3.2mm-4.2mm).

Pipe diameter range: DN20mm to DN400mm, of which DN90mm-DN200mm is the common model.

Execution standard: in accordance with GB/T 13664-2006 “Hard polyvinyl chloride (PVC-U) pipe for Low pressure irrigation”, to ensure pressure resistance and durability.

Advantages z PCV Pipe in Arolniczy Irrigation

High rigidity, suitable for ground fixed laying.

The cost is lower than PE tube, and the economy is outstanding.

Good high temperature resistance (working temperature 0℃~45℃).

PE Pipes Vs PVC pipeS Comparative Analysis

Selection suggestions:

– Terrain complex or low temperature environment: PE pipe is preferred.

– Long distance fixed water delivery: PVC piping is recommended to control costs.

– Drip irrigation/sprinkler irrigation system: Depending on budget and maintenance conditions, PE pipe is suitable for long-term use, PVC pipe is suitable for short-term projects.

PE pipe and PVC pipe have their own advantages in agricultural irrigation, and users need to scientifically select them according to the specific terrain, budget and maintenance conditions. As a professional pipe manufacturer, we provide high-quality PE/PVC irrigation pipes that meet national standards, support customized specifications and services, and help the global agriculture to achieve efficient water conservation goals.

Dostawca

Luoyang Datang Energy Tech Co., z oo. jest wiodącym chińskim producentem specjalizującym się w wysokiej jakości rurach i kształtkach z tworzyw sztucznych. Wyposażone w najnowocześniejsze zautomatyzowane linie produkcyjne i wspierane przez zespół 200 profesjonaliści, Oferujemy szeroką gamę produktów obejmującą ponad 150 types of plastic pipes and fittings designed for water supply and drainage systems, przesył gazu, i systemy ogrzewania podłogowego. Naszymi głównymi produktami są rury i kształtki PCV, PE (HDPE) Rury i armatura, Rury i kształtki PPR, i rury do ogrzewania podłogowego PEX.

Jeśli masz jakiekolwiek pytania dotyczące rur PVC & Rura PE w nawadnianiu rolniczym, nie wahaj się z nami skontaktować!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

E-mail: sales@pipesandfittings.net