W bardziej ekstremalnych środowiskach, które łączniki rurowe mogą „przetrwać”?Jest tylko jedna odpowiedź:PP-RCT

PP-RCT is a high-performance upgraded material in the field of polypropylene piping, full name Polypropylene Random Copolymer with enhanced Crystallinity Temperature, commonly referred to as high-temperature-resistant polypropylene pipe or fourth-generation PP-R pipe. It is not a completely new material, but a high-performance polypropylene pipe developed on the basis of traditional PP-R through molecular structure optimization, crystallization morphology control, and nanomodification technologies.

The core differences between PP-RCT and traditional PP-R

On the left is the monoclinic crystal (α crystal) of PP-R, and on the right is the hexagonal crystal (β crystal) of PP-RCT.

Performance Indicators	Traditional PP-R	PP-RCT
Long-term service temperature	≤70℃	≤90~95℃
Short-term tolerance temperature	≤95℃	≤110℃
Minimum required strength (MRS)	8.0 MPa	10.0 MPa
High-temperature pressure-bearing capacity	Benchmark	Increase by 30%~50%
Low temperature impact resistance	General (brittle below 0℃)	Significantly improved (still flexible at -20°C)
Wall thickness under the same pressure	Relatively thick	Can be thinned by 15%~20%
Creep/Stress Cracking Resistance	Medium	Excellent

Manufacturing of PP-RCT

Special Resin Synthesis and Modification
Random copolymerization of propylene with 1.5%~4% ethylene, precisely controlling the molecular weight distribution; the core involves a blend of high-efficiency α-crystalline nucleating agents and a composite anti-oxidation system. Through twin-screw blending and granulation, special particles with high crystallinity and high melt strength are formed.
Precision Extrusion Molding
Single-screw extrusion is used with strict temperature control (≤230°C to prevent degradation); the key to success lies in ‘gradient slow cooling’ rozmiar (60°C → 40°C → 25°C staged spraying), allowing the nucleating agents to fully act and uniformly refine spherulites, avoiding internal stress and microcracks caused by rapid cooling; laser online diameter and thickness measurement is conducted throughout.
Mandatory Quality Inspection and Certification
Must pass a 1000-hour static hydrostatic test at 95°C/10.0MPa and extrapolate life to 70°C/50 years according to ISO 9080; simultaneously test thermal stability (OIT ≥ 20 min) and drinking water hygiene safety; after passing, the pipe body is mandatorily marked with PP-RCT, pressure rating, and the applicable standard.

PP-RCT three-layer co-extrusion production line：Inner layer (PP-R) → Middle layer (PP-R fiberglass reinforced layer) → Outer layer (PP-R)

The advantages of pp-rct in extreme environments

Extremely cold but not brittle: fine crystalline structure, homogeneous heat fusion, high system integrity under freeze-thaw cycles;
High temperature but not soft: MRS 10.0 MPa, anti-oxidation system, long-term stability at 90°C operating conditions;
Earthquake-resistant and corrosion-resistant: flexible one-piece molding, chemically inert, suitable for geologically active areas and high-chlorine water quality regions.

Application of pp-rct

Building hot and cold water supply systems (especially for high-rise buildings, hot water return, and whole-house water supply for villas)
Connection of underfloor heating main/branch pipes, exposed pipelines for radiators
Solar heat collection systems, air source heat pump refrigerant water systems
Places with high requirements for water quality and temperature, such as hospitals, hotels, swimming pools, and food factories
Industrial low-pressure fluid transport (non-strongly corrosive media, temperature ≤ 95°C)

Losowe rury polietylenowe — PP-RCT Pipes

Profil firmy

Luoyang Datang Energy Tech Co., z oo. jest wiodącym chińskim producentem specjalizującym się w wysokiej jakości rurach i kształtkach z tworzyw sztucznych. Wyposażone w najnowocześniejsze zautomatyzowane linie produkcyjne i wspierane przez zespół 200 profesjonaliści, Oferujemy szeroką gamę produktów obejmującą ponad 150 rodzaje rur i kształtek z tworzyw sztucznych przeznaczonych do systemów wodociągowych i kanalizacyjnych, przesył gazu, i systemy ogrzewania podłogowego. Naszymi głównymi produktami są rury i kształtki PCV, PE (HDPE) Rury i armatura, Rury i kształtki PPR, i rury do ogrzewania podłogowego PEX.

Jeśli masz jakiekolwiek pytania dotyczące złączek rurowych HDPE, nie wahaj się z nami skontaktować!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

E-mail: sales@pipesandfittings.net