Isbarbardhigga Dhuumaha Biyaha ee u dhexeeya Tubooyinka PEX iyo Tubooyinka PPR

Dhismayaal casri ah, Doorashada tuubooyinka biyaha waa tallaabo muhiim ah. PEX (polyetylen iskutallaabta) Dhuumaha iyo PPR (polypropylene) Dhuumaha are two common materials for water supply pipes, each with its own unique advantages and disadvantages.

Qalab Properties are Important Considerations When Choosing Wka dib Skor u kaca Pip

PEX pipes are made of cross-linked polyethylene and have good flexibility and heat resistance. This makes PEX pipes easier to install, capable of bending without breaking, and suitable for complex piping layouts. Tuubooyinka PPR, made of polypropylene, are more rigid and suitable for straight laying. They can withstand higher pressure, but in some cases, they are prone to cracking due to external forces.

Differences in Heat Rjiritaan Between PEX Pipes and PPR Pipes

PEX pipes have a wider temperature range and can typically withstand temperatures between -40 ° C and 95 ° C, making them suitable for cold and hot water systems. Tuubooyinka PPR, on the other hand, have a relatively narrow temperature range, typically between 0 ° C and 80 ° C. Although they perform well at normal temperatures, they may deform in high-temperature environments. In hot water supply scenarios, PEX pipes have more advantages.

Both PEX and PPR pipes perform well in terms of corrosion resistance. Both are not easily affected by water quality, do not rust or corrode, and are suitable for water supply systems of various water qualities. Si kastaba ha ahaatee, PEX pipes may be slightly less tolerant to certain chemicals, especially in environments with strong acids and strong alkalis, and special attention should be paid when using them.

Differences in installation PEX Pipes and PPR Pipes

The installation of PEX pipes typically uses hot-melt connections or special joints, which are relatively simple to operate and can be done without the need for a lot of tools. Its flexibility allows for a reduction in the use of joints during construction, thereby lowering the risk of leakage. The installation of PPR pipes, on the other hand, requires the use of hot-melt welding technology, which, although securely connected, demands specialized equipment and certain skills, thus taking a relatively long time during construction.

Both PEX and PPR pipes have a long service life. Generally speaking, PEX pipes can last for more than 50 sanado, while PPR pipes can last for more than 30 sanado. Although both are durable enough, codsiyada la taaban karo, PEX pipes perform more stably under extreme temperatures and pressures.

Comparison Between Production Cost:PEX VS PPR

Economy is also an important consideration when choosing pipes. The production cost of PEX pipes is relatively high, so they may seem more expensive in terms of initial investment. But it may be more cost-effective in the long run because of its longer service life and lower maintenance costs. By contrast, PPR pipes have a lower initial cost and are suitable for projects with limited budgets, but they may increase subsequent costs in terms of maintenance and replacement.

Alaab-qeybiye

Hal qayb oo ka mid ah Luoyang Datang Energy Tech Co., Ltd., Ltd. waa shirkad hormood ah oo Shiinees ah oo ku takhasustay tuubooyinka balaastikada ah iyo qalabyada tayada sare leh. Ku qalabaysan khadadka wax soo saarka otomaatiga ah ee casriga ah oo ay taageerayaan koox ka mid ah 200 xirfadlayaasha, Waxaan bixinaa khad wax soo saar ballaaran oo ka kooban 150 types of plastic pipes and fittings designed for water supply and drainage systems, gudbinta gaaska, iyo hababka kululaynta sagxada. Badeecadahayada ugu muhiimsan waxaa ka mid ah tuubooyinka PVC iyo qalabyada, PE (HDPE) Tuubooyinka iyo Qalabyada, Tuubooyinka PPR iyo Qalabyada, iyo PEX Dabaqa Tubooyinka kululaynta.

Haddii aad wax su'aalo ah ka qabto tuubooyinka PPR, fadlan ha ka waaban inaad nala soo xidhiidho!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

iimaylka: sales@pipesandfittings.net