Overview of 3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve

3 Piece Dn10 Dn25 CF8 Thread Ball Valve is engineered for superior performance in plumbing, indasteri, le likopo tsa khoebo. E entsoe ka loto e se nang loto, koporo e thibelang ho bola, li-valve tsena li etsa bonnete ba hore li tšoarella nako e telele le taolo e ka tšeptjoang ea ho phalla ha metsi, khase, oli, le maro a mang.

Ka mochini o nepahetseng le kaho e matla, li-valve tsa rona tsa koporo li fana ka ts'ebetso e boreleli, tiiso e babatsehang, le ho hanyetsa khatello e phahameng-ho etsa hore e be tse loketseng bakeng sa bolulo, khoebo, le mekhoa ea lipeipi tsa indasteri.

Key Features of 3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve

Kaho ea Pele ea Brass - e se nang lead, e thibelang ho bola, le e tšoarellang

Leak-Proof Design - Litiiso tse tiileng bakeng sa taolo e sireletsehileng ea mokelikeli

Khatello e Phahameng & Temperature Resistance - Tshebetso e ka tšeptjoang tlas'a maemo a boima

Smooth Operation - Ho bonolo ho fetola lihapi bakeng sa phetoho e nepahetseng ea phallo

Lisebelisoa tse fapaneng - E lumellana le metsi, khase, oli, le litsamaiso tsa HVAC

Multiple Size & Likhetho tsa khokahano - E fumaneha ka mor'a ¼” ho 2″ boholo (NPT, Likhoele tsa BSP)

(3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve)

Specification of 3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve

This 3-piece ball valve comes in two sizes: DN10 (about 3/8 intshi) and DN25 (about 1 intshi). It features threaded connections for simple installation. The valve body uses CF8 stainless steel. This material resists rust. It handles tough conditions well.

The valve design uses three main pieces. Two end pieces connect to the pipe. The center piece holds the ball. This design allows easy cleaning. Maintenance is straightforward. You can take it apart without removing the whole valve from the pipe system.

Hare, a polished ball controls the flow. Turn the handle 90 degrees. The ball rotates. It opens or shuts off the flow fast. The ball moves smoothly. The valve seals reliably. Ho dutla ho a thibelwa.

Seals use PTFE (Teflon). PTFE seats surround the ball. PTFE seals well. It handles heat. E hanela lik'hemik'hale. The seals last a long time. They need little upkeep.

The valve works under pressure. It handles PN40 ratings. This means 40 bar pressure at room temperature. Temperature limits are important. The valve handles -20°C to +180°C normally. PTFE seals define the max temperature. Check exact specs for your fluid.

Operation uses a simple lever handle. The lever shows the valve position clearly. Open is parallel to the pipe. Closed is perpendicular. You see the status instantly. A sturdy stem connects the lever to the ball. The stem won’t blow out under pressure.

These valves fit many applications. Use them for water. Use them for air. Use them for oil. Use them for steam. Use them for general chemicals. They work well in factories. They work well in processing plants. They work well in building systems. They work well where reliable shut-off matters.

(3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve)

Likopo tsa 3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve

Here’s the content about those ball valves:

People use these 3-piece ball valves a lot in factories and pipes. They come in small sizes, DN10 and DN25. That means about 10mm and 25mm across the pipe opening. The valves are made from CF8 stainless steel. This material fights rust well. It handles many chemicals. It also stands up to heat. You see these valves with threaded ends. This makes connecting them to pipes easy. Screw them on directly. No special flanges are needed.

These valves control flow. Turn the handle 90 degrees. The ball inside spins. This opens or shuts off liquid or gas fast. They work reliably for on/off jobs. Don’t use them much for fine flow control. The full-port design helps. It means the hole through the ball is big. Almost as big as the pipe itself. This reduces pressure loss. Stuff flows through easily.

Their tough CF8 build suits harsh places. Chemical plants need valves like this. They resist acids and bases. Water treatment uses them too. They handle clean water, maybe some wastewater. Food and drink factories pick them. Stainless steel is easy to clean. It meets hygiene rules. You find them in general industrial pipes. They move air, steam, or mild fluids.

The 3-piece design is smart. You can take the middle section out. This lets you fix the seals or ball easily. You don’t take the whole valve off the pipe. This saves time and work during upkeep. It cuts down on maintenance trouble.

These valves handle decent pressure. Check the exact rating for your job. They are strong but not for extreme force. Their compact size fits tight spots. The threaded ends simplify installation. You don’t need complex tools.

Ho paka le ho Romela

E itšetlehile ka lihlahisoa le qty,re ne re ka etsa pack of coiling,meqolo,ho phuthela ka bongata,makese kapa mabokose,etc.

Thomello:Ka leoatleng,seporo,ka moea kapa joalo ka kopo ea moreki.

Boemo ba Khoebo

Luoyang Datang Energy Tech Co., Ltd. ke moetsi ea ka sehloohong oa Machaena ea sebetsanang le liphaephe tsa polasetiki tsa boleng bo holimo le li-fittings. Ho hlomelloa ka mela ea tlhahiso ea morao-rao e ikemetseng le e tšehetsoeng ke sehlopha sa 200 litsebi, re fana ka lethathamo le pharaletseng la lihlahisoa tse kenyelletsang ho feta 150 mefuta ea lipeipi tsa polasetiki le lisebelisoa tse etselitsoeng ho fana ka metsi le tsamaiso ea ho ntša metsi, phetiso ea khase, le mekhoa ea ho futhumatsa fatše. Lihlahisoa tsa rona tsa mantlha li kenyelletsa liphaephe le li-Fittings tsa PVC, PE (HDPE) Liphaephe le Lisebelisoa, PPR Liphaephe le Fittings, le PEX Floor Heating Pipes.

Na u na le lipotso mabapi le HDPE Pipe Fitting, ka kopo o seke oa qeaqea ho iteanya le rona!

Mohala:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Email: sales@pipesandfittings.net

Melao ea Tefo

T/T,L/C ka pono,phetiso ea chelete e bitsoang western union & Paypal,etc.

5 FAQs of 3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve

What material is the valve made from?
This valve uses CF8 stainless steel. CF8 is a common stainless steel grade. It resists rust well. It handles many chemicals safely. This material is strong and lasts a long time.

What pressure can this valve handle?
Check the valve’s nameplate for its exact rating. Ka kakaretso, DN10 and DN25 CF8 threaded ball valves handle pressures up to 1000 PSI. This depends on the temperature. Always confirm the rating for your specific use.

How hot or cold can the fluid be?
CF8 stainless steel works well in many temperatures. Typically, these valves handle fluids from -20°F (-29°C) up to 400°F (204°C). Extreme temperatures might need special seals. Verify the limits for your application.

Is the valve easy to fix?
Ee, the 3-piece design makes repairs simple. You can take the valve body apart. You don’t need to remove the whole valve from the pipes. This lets you replace seals or the ball easily. E boloka nako le chelete.

How do I connect this valve to pipes?
This valve has threaded connections. The ends have standard pipe threads. You screw them directly into matching threaded pipe fittings. Make sure the threads are clean. Use thread sealant for a tight, leak-free connection.

(3 Sekhechana sa Dn10 Dn25 CF8 Thread Ball Valve)