Pipe ea Polyethylene e Phahameng ka ho Fetisisa tsamaisong ea ho nosetsa

Pipe ea Polyethylene e phahameng haholo Selelekela

Liphaephe tsa Polyethylene tsa High Density ke likarolo tse etselitsoeng ho kopanya, tsamaiso, branching kapa ho tiisa tsamaiso ea lipeipi tsa polyethylene, e entsoe ka polyethylene ea boleng bo holimo (HDPE) kapa polyethylene e boima ba mahareng (MDPE), e lumellana ka ho phethahetseng le liphaephe tsa PE mme e sebelisoa haholo tšimong ea lipalangoang tsa mokelikeli.

Pipe ea Polyethylene e phahameng haholo Molemo

1. Khanyetso e matla ea kutu: ho hanyetsa acid le alkali, letsoai le khoholeho ea mobu ea lik'hemik'hale, nako ea bophelo ho feta 50 lilemo.

2. flexible impact resistance: ikamahanya le sebaka sa ho lula fatše le tikoloho ea mocheso o tlase, fokotsa kotsi ea ho phatloha ha tube.

3. E bobebe ebile e bonolo ho e kenya: boima ke bona feela 1/8 ea lisebelisoa tsa lipeipi tsa tšepe, ho ts'ehetsa mekhoa e fapaneng ea khokahano joalo ka ho qhibiliha ho chesang le ho qhibiliha ha motlakase.

4. Tšireletso ea tikoloho le e seng chefo: ho tsamaellana le litekanyetso tsa bohloeki ba metsi a nooang (joalo ka GB/T 17219), ha ho na pula ea tšepe e matla.

5. Theko e tlase ea tlhokomelo: lebota la ka hare le boreledi, khanyetso e nyane, 'me tšebeliso ea nako e telele ha e bonolo ho e eketsa.

Pipe ea Polyethylene e phahameng haholo Litlhaloso

Lihlopha tsa khokahano: Ho kopanya, Flange Socket,Kopano

Sehlopha sa tsamaiso: 45°/90° Setsoe, Ho fokotsa Elbow

Sehlopha sa lekala: Ho lekana/Ho fokotsa Tee, Sefapano

Sehlopha sa plugging: Qetello ea cap, Soketeng

Sehlopha sa ho lokisa: Karolo ea ho lokisa ka potlako, Saddle bypass

Li-gaskets: Li-gasket li tšoana le mehele e sebelisetsoang ho koala likhokahano pakeng tsa liphaephe. Li tla ka thepa le libopeho tse fapaneng ho latela mofuta oa khokahano eo u nang le eona.

Pipe Elbows: Li-elbows tsa lipeipi li thusa ho fetola tsela eo peipi e phallang ka eona. Li tla ka li-angles tsa 90-degree le 45-degree, mme ho na le mefuta e mmedi: sebaka se selelele (e boreledi) le radius e khuts'oane (se nkang sebaka se senyane empa se bakang kgatello e kgolo).

Pipe Bend: Liphaephe tse kobehang li tšoana le mekoloko e bonolo phala. Li sebelisoa ha u hloka phetoho e boreleli tseleng ho qoba khatello ea khatello. Li tla ka boholo bo fapaneng, joalo ka 3D le 5D, e bolelang bolelele ba mothipa.

Pipe Tee: Pipe tee e shebahala joalo ka tlhaku "T" 'me e sebelisetsoa ho arola ho phalla ha mokelikeli ho tloha phapeng e kholo. Ho na le mefuta e fapaneng, joalo ka li-tee tse otlolohileng (tse nang le bophara bo lekanang), ho fokotsa likhahla (tse nang le makala a manyane), tee tse koetsoeng (e sebelisoang liphaepheng tse khethehileng), le tee ea wye (tse hokelang lipeipi ka sekhutlo sa 45-degree ho fokotsa ho hohlana).

Sefapano: Sefapano se shebahala joalo ka letšoao la ho kopanya 'me se na le sekoti se le seng le liphahlo tse tharo. E sebelisoa haholo-holo lits'ebetsong tsa ho fafatsa mollo, eseng liphaephe tsa kamehla.

Li-Reducers tsa Pipe: Lisebelisoa tsa liphaephe li etsa hore phala e be tšesaane. Ho na le mefuta e 'meli: e tsepamisitseng maikutlo ebile e tsepamisitse maikutlo. Li-concentric li boloka bohareng ba phala ka bophahamo bo lekanang. Li sebelisoa ha boholo ba liphaephe tse peli tse fapaneng li hloka ho tšoana bohareng ba tsamaiso. Li-eccentric li thusa ho boloka bokatlase ba phala boemong bo itseng, kahoo bokantle bo ka ntle ba phala bo lula bo le boemong.

Pipe Caps: Qetellong ea tsamaiso ea lipeipi, ho na le cap. E koahela pheletso ea phala ho emisa ho lutla.

Stub E qetella: Lipheletso tsa li-stub li etsa ntho e ts'oanang le li-pipe caps empa li sebelisoa ka li-flange tse kopanetsoeng.

Mekhatlo ea Liphaephe: Tsena li sebelisetsoa liphaephe tse nang le khatello e tlaase e lokelang ho tlosoa hangata. Li na le likarolo tse tharo: pheletso e tshehadi, pheletso e motona, le nate. Nate, mmoho le pheletso e tshehadi le e motona, e etsa tiiso e matla.

Peipi Coupling: Ho na le mefuta e meraro: tletseng, halofo, le ho fokotsa. Li-couplings tse feletseng li kopanya liphaephe tse nyenyane. Li-half couplings li kopanya phala e nyenyane ho e kholo. Ho fokotsa li-couplings ho kopanya liphaephe tse peli tsa boholo bo fapaneng.

High Density Polyethylene Pipe Technical Standards

Ho kenya peipi ea welding: e loketse DN20-DN315, motlakase 39.5V±0.5V, tjheseletsa nako jarolla ka ho iketsa calibration.

Ho kenya butt e chesang: DN50-DN1200, mocheso poleiti 210℃±10℃, boemo ba khatello bo fetohang.

Sehokelo sa mochini: mofuta oa clamp ea tšepe e sa hloekang, khatello e sebetsang ≤1.6MPa, ho kenya kapele ntle le lisebelisoa.

Pipe ea Polyethylene e phahameng haholo Kopo

1. Masepala Eboenjiniere

Marang-rang a lipeipi tsa phepelo ea metsi: PE Tee, Sekoti sa flange, Ho hanyetsa hamore ea metsi, Fokotsa sekhahla sa ho lutla.

Phetiso ea khase: Ho kenya peipi ea khase ea PE e mosehla, Setifikeiti sa GB15558, moralo oa anti-static.

2. Indasteri Slilemo tse ngata

Phaephe ea lik'hemik'hale: Acid le alkali manganga ka litsela tse 'nè le setsoe, e tšehetsang PP/FRP lera le kopaneng.

Mocheso oa metsi: DN800 phala e kholo ea bophara bo lekanang, e hanyetsanang le ho roaloa ha tšepe.

3. Temo le Etsa tikoloho Ptšitiso

Sistimi ea ho nosetsa ka marotholi: Potoloho ea PE ea mofuta o monyane, kabo e nepahetseng, ho boloka metsi ho feta 30%.

Pokello ea likhoerekhoere: Sehokelo sa tiiso se matlafalitsoeng sa tlhahlobo ea seliba, anti-leakage grade IP68.

Ho paka le ho Romela

E itšetlehile ka lihlahisoa le qty,re ne re ka etsa pack of coiling,meqolo,ho phuthela ka bongata,makese kapa mabokose,etc.

Thomello:Ka leoatleng,seporo,ka moea kapa joalo ka kopo ea moreki.

Boemo ba Khoebo

Luoyang Datang Energy Tech Co., Ltd. ke moetsi ea ka sehloohong oa Machaena ea sebetsanang le liphaephe tsa polasetiki tsa boleng bo holimo le li-fittings. Ho hlomelloa ka mela ea tlhahiso ea morao-rao e ikemetseng le e tšehetsoeng ke sehlopha sa 200 litsebi, re fana ka lethathamo le pharaletseng la lihlahisoa tse kenyelletsang ho feta 150 mefuta ea lipeipi tsa polasetiki le lisebelisoa tse etselitsoeng ho fana ka metsi le tsamaiso ea ho ntša metsi, phetiso ea khase, le mekhoa ea ho futhumatsa fatše. Lihlahisoa tsa rona tsa mantlha li kenyelletsa liphaephe le li-Fittings tsa PVC, PE (HDPE) Liphaephe le Lisebelisoa, PPR Liphaephe le Fittings, le PEX Floor Heating Pipes.

Haeba u na le lipotso mabapi le Pipe ea PVC le ho tšoaneleha ho Nosetso ea Temo, ka kopo o seke oa qeaqea ho iteanya le rona!

Mohala:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Email: sales@pipesandfittings.net

Melao ea Tefo

T/T,L/C ka pono,phetiso ea chelete e bitsoang western union & Paypal,etc.

Lipotso tsa Pipe ea Polyethylene e phahameng ea Density

Q1: Mokhoa oa ho khetha lintlha tse nepahetseng tsa lipeipi tsa PE?

A: Mohato 1: Netefatsa phaephe bophara ba bokantle (mohlala. DE110) le boleng ba SDR (mohlala. SDR11).

Mohato 2: Khetha boemo ba PN ho latela khatello ea sistimi (mohlala. PN16 e lumellana le 1.6MPa).

Mohato 3: Khetha thepa ho ea ka litšobotsi tsa seaplane (khase e hloka likarolo tse khethehileng tse mosehla).

Q2: Ke lintlha life tsa ts'ebetso ea khokahano ea hot melt?

A: Hloekisa ntlha ea lipeipi ho netefatsa hore ha ho na oli;

Mocheso oa sejana sa ho futhumatsa o laoloa ho 210±10 ℃;

Boloka sethala sa khatello ea butt se tsitsitse, o seke wa sisinyeha nakong ya ho phodisa.

Q3: Na lipeipi tsa PE li ka kopanngoa le phala ea PVC?

A:Khokahano e tobileng ha e khothalletsoe. E hloka ho hokeloa ka adaptara ea PE/PVC ebe e tiisitsoe ka mochini ka flange kapa khoele.

Q4: Etsa li-fittings tsa lipeipi li tšehetsa litekanyo tse sa tloaelehang tse tloaelehileng?

A: Ee. Fana ka litšebeletso tsa 'mapa tsa 3D, e ka etsa likarolo tsa sebopeho sa DN50-DN2000, nako ea ho etella pele ea 15-30 matsatsi.