VVS & VVS: Komplett lista över värmerörkopplingar

Choose the right fittings! PPR pipes are heat-resistant and pressure-resistant, aluminum-plastic pipes are oxygen-resistant and easy to bend, brass valves are rust-proof and highly sealed, thermostats are precise and energy-saving, safety valves are essential explosion-proof pipes. Avoid inferior parts and extend system life by 50 år

Heating Pipe Fittings i VVS

PPR-rör (slumpmässig sampolymer polypropen) : The most mainstream choice at present. High heat resistance (fram till 110 ° C for a short time at 95 °C), tryckmotstånd, korrosionsbeständighet, no interface hazard in hot-melt connection, good insulation, moderate price, long service life (theoretical value of 50 år). Recommended for use.

Aluminum-plastic composite pipe: Pressure-resistant, heat-resistant, good oxygen permeability resistance, no rebound when bent, easy to connect (clamping or sliding type). But the cost of the joints is slightly higher and the installation requirements are strict. Recommended for use (especially in exposed installations or where bending is required).

PB pipe (polybutylene pipe) : Excellent performance (better than PPR in flexibility, heat and pressure resistance, slagtålighet, and insulation), but expensive, with a lower market share.

Galvanized steel pipe: Traditional material, hög hållfasthet, high heat resistance. But not recommended for newly installed systems: prone to rust, corrosion and scaling (reducing flow, polluting the system), complex installation (requiring threading or welding), poor insulation, relatively short lifespan.

Rostfritt stål: Extremely strong, korrosionsbeständig, hygienic, extremely long service life. But they are expensive, have special connections (crimping, welding), and are mainly used in high-end or special demand situations.

Function: A channel for transporting hot water or steam, the main trunk and branch of the system.

Valves (for flow control, opening and closing, regulation, säkerhet)

1. Stop valves/gate valves

Valve body/cover: brass (mainstream, good corrosion resistance), cast iron (cheap but prone to rust, not recommended for home use), rostfritt stål (high-end, excellent corrosion resistance).

Valve stem: Rostfritt stål (rust-resistant).

Sealing material: High-quality rubber or polytetrafluoroethylene (PTFE).

Function: Primarily used to cut off or connect the medium (water/steam) in the pipeline. The regulating performance of the stop valve is slightly better than that of the gate valve, but the resistance is slightly greater; A gate valve has less resistance when fully open. Stop valves are commonly used in heating systems.

2. Ball valve

Valve body/Cover: Mässing (most commonly used), rostfritt stål (high-end, korrosionsbeständig).

Ball: chrome-plated brass, rostfritt stål.

Valve stem: Rostfritt stål.

Seal: PTFE.

Function: Quick opening and closing by rotating a 90-degree sphere. Easy to operate, quick on/off, low resistance, good sealing. It is perfect as a switch control valve for radiators or pipe sections.

Thermostatic valve (thermostatic valve)

Valve body: brass (mainstream), rostfritt stål.

Valve core: Quality engineering plastic, rostfritt stål.

Temperature sensing element: paraffin or special liquid.

Function: Installed at the water inlet of the radiator, automatically regulates the flow of water into the radiator to precisely control the room temperature. After the user sets the target temperature, the temperature-sensing element inside the valve head automatically expands/contracts according to room temperature, driving the valve core to open and close. A key accessory for energy efficiency and comfort.

Balance valve (static/dynamic)

Valve body: Mässing, cast iron (large main pipe), rostfritt stål.

Valve core/measuring element: rostfritt stål, engineering plastic.

Function: Regulate the hydraulic balance of the system, ensure that each loop or each radiator gets the designed flow, and solve the problem of near hot and far cold. The static balance valve requires manual measurement and debugging; Dynamic balance valves (self-operated differential pressure/flow control valves) can automatically adapt to changes in system pressure to maintain the set flow.

Safety valve/relief valve

Valve body: Mässing, rostfritt stål.

Spring: Rostfritt stål.

Function: Install in critical positions such as the highest point of a boiler or system. When the system pressure exceeds the set value, it automatically opens for pressure relief to prevent overpressure from causing equipment damage or safety accidents. It is an essential safety device.

Automatic exhaust valve

Valve body: Mässing (mainstream), rostfritt stål, plastic (low-end, use with caution).

Float/Seal: rostfritt stål, premium rubber/plastic.

Function: Install at the highest point of the system or where air is likely to accumulate. Automatically expel the accumulated air in the pipes to prevent air blockage from affecting circulation and heat dissipation. Ensure the system is functioning properly.

This comprehensive guide covers the most common fittings in a heating piping system. In practical applications, select and purchase under the guidance of a professional based on your specific system type (central heating/independent heating/underfloor heating/radiator), design drawings, budget, and local market availability.

Leverantör

Luoyang Datang Energy Tech Co., Ltd. är en ledande kinesisk tillverkare som specialiserat sig på högkvalitativa plaströr och kopplingar. Utrustad med toppmoderna automatiserade produktionslinjer och stöds av ett team av 200 proffs, vi erbjuder ett omfattande produktsortiment som omfattar över 150 types of plastic pipes and fittings designed for water supply and drainage systems, gasöverföring, och golvvärmesystem. Våra huvudprodukter inkluderar PVC-rör och rördelar, PE (HDPE) Rör och kopplingar, PPR Rör och kopplingar, och PEX golvvärmerör.

Skulle du ha några frågor angående PPR-rör,Mässingsventiler och mässingsbeslag, tveka inte att kontakta oss!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

E-post: sales@pipesandfittings.net