HVAC & Uwekaji mabomba: Orodha Kamili ya Mipangilio ya Bomba la Kupasha joto

Chagua fittings sahihi! Mabomba ya PPR ni sugu ya joto na sugu ya shinikizo, mabomba ya alumini-plastiki ni sugu ya oksijeni na ni rahisi kuinama, valves za shaba hazina kutu na zimefungwa sana, thermostats ni sahihi na zinaokoa nishati, safety valves are essential explosion-proof pipes. Avoid inferior parts and extend system life by 50 miaka

Heating Pipe Fittings katika Uwekaji mabomba

mabomba ya PPR (bila mpangilio copolymer polypropen) : The most mainstream choice at present. High heat resistance (hadi 110 ° C for a short time at 95 °C), upinzani wa shinikizo, upinzani wa kutu, no interface hazard in hot-melt connection, good insulation, moderate price, maisha marefu ya huduma (theoretical value of 50 miaka). Recommended for use.

Aluminum-plastic composite pipe: Pressure-resistant, heat-resistant, good oxygen permeability resistance, no rebound when bent, easy to connect (clamping or sliding type). But the cost of the joints is slightly higher and the installation requirements are strict. Recommended for use (especially in exposed installations or where bending is required).

PB pipe (polybutylene pipe) : Excellent performance (better than PPR in flexibility, heat and pressure resistance, upinzani wa athari, and insulation), but expensive, with a lower market share.

Bomba la chuma la mabati: Traditional material, nguvu ya juu, high heat resistance. But not recommended for newly installed systems: prone to rust, corrosion and scaling (reducing flow, polluting the system), complex installation (requiring threading or welding), poor insulation, relatively short lifespan.

Chuma cha pua: Extremely strong, sugu ya kutu, hygienic, extremely long service life. But they are expensive, have special connections (crimping, welding), and are mainly used in high-end or special demand situations.

Function: A channel for transporting hot water or steam, the main trunk and branch of the system.

Vali (for flow control, opening and closing, regulation, usalama)

1. Stop valves/gate valves

Valve body/cover: shaba (mainstream, good corrosion resistance), cast iron (cheap but prone to rust, not recommended for home use), chuma cha pua (high-end, upinzani bora wa kutu).

Valve stem: Chuma cha pua (rust-resistant).

Sealing material: High-quality rubber or polytetrafluoroethylene (PTFE).

Function: Primarily used to cut off or connect the medium (water/steam) in the pipeline. The regulating performance of the stop valve is slightly better than that of the gate valve, but the resistance is slightly greater; A gate valve has less resistance when fully open. Stop valves are commonly used in heating systems.

2. Valve ya mpira

Valve body/Cover: Shaba (inayotumika zaidi), chuma cha pua (high-end, sugu ya kutu).

Ball: chrome-plated brass, chuma cha pua.

Valve stem: Chuma cha pua.

Seal: PTFE.

Function: Quick opening and closing by rotating a 90-degree sphere. Easy to operate, quick on/off, low resistance, good sealing. It is perfect as a switch control valve for radiators or pipe sections.

Thermostatic valve (thermostatic valve)

Valve body: shaba (mainstream), chuma cha pua.

Valve core: Quality engineering plastic, chuma cha pua.

Temperature sensing element: paraffin or special liquid.

Function: Installed at the water inlet of the radiator, automatically regulates the flow of water into the radiator to precisely control the room temperature. After the user sets the target temperature, the temperature-sensing element inside the valve head automatically expands/contracts according to room temperature, driving the valve core to open and close. A key accessory for energy efficiency and comfort.

Balance valve (static/dynamic)

Valve body: Shaba, cast iron (large main pipe), chuma cha pua.

Valve core/measuring element: chuma cha pua, engineering plastic.

Function: Regulate the hydraulic balance of the system, ensure that each loop or each radiator gets the designed flow, and solve the problem of near hot and far cold. The static balance valve requires manual measurement and debugging; Dynamic balance valves (self-operated differential pressure/flow control valves) can automatically adapt to changes in system pressure to maintain the set flow.

Safety valve/relief valve

Valve body: Shaba, chuma cha pua.

Spring: Chuma cha pua.

Function: Install in critical positions such as the highest point of a boiler or system. When the system pressure exceeds the set value, it automatically opens for pressure relief to prevent overpressure from causing equipment damage or safety accidents. It is an essential safety device.

Automatic exhaust valve

Valve body: Shaba (mainstream), chuma cha pua, plastic (low-end, use with caution).

Float/Seal: chuma cha pua, premium rubber/plastic.

Function: Install at the highest point of the system or where air is likely to accumulate. Automatically expel the accumulated air in the pipes to prevent air blockage from affecting circulation and heat dissipation. Ensure the system is functioning properly.

This comprehensive guide covers the most common fittings in a heating piping system. Katika maombi ya vitendo, select and purchase under the guidance of a professional based on your specific system type (central heating/independent heating/underfloor heating/radiator), design drawings, budget, and local market availability.

Msambazaji

Luoyang Datang Energy Tech Co., Ltd. ni mtengenezaji mkuu wa Kichina aliyebobea kwa mabomba ya plastiki ya ubora wa juu na vifaa vya kuweka. Ina vifaa vya kisasa vya uzalishaji wa kiotomatiki na kuungwa mkono na timu ya 200 wataalamu, tunatoa laini ya kina ya bidhaa inayojumuisha zaidi 150 types of plastic pipes and fittings designed for water supply and drainage systems, usambazaji wa gesi, na mifumo ya joto ya sakafu. bidhaa zetu kuu ni pamoja na PVC Mabomba na Fittings, PE (HDPE) Mabomba na Fittings, Mabomba ya PPR na Fittings, na Mabomba ya Kupasha joto kwenye Ghorofa ya PEX.

Je, una maswali yoyote kuhusu mabomba ya PPR,Valves za shaba na fittings za shaba, tafadhali usisite kuwasiliana nasi!

Simu.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Barua pepe: sales@pipesandfittings.net