Overview of Gas Brass Push Swivel Half Union Tube Fitting

Gas Brass Push Swivel Half Union Tube Fitting provides reliable, miunganisho ya muda mrefu kwa mahitaji yako yote ya mabomba na mfumo wa HVAC. Imetengenezwa bila risasi, aloi ya shaba inayostahimili dezincification, vifaa hivi vinakidhi viwango vikali vya tasnia kwa utendakazi na usalama. Kamili kwa matumizi ya makazi na biashara, fittings zetu za shaba huunda salama, viungo visivyoweza kuvuja katika njia za usambazaji maji, mifumo ya gesi, na mitambo ya hewa iliyobanwa.

Key Features of Gas Brass Push Swivel Half Union Tube Fitting

Nyenzo ya Juu – Bila risasi, DZR ya shaba kwa upinzani wa kutu
Viunganisho salama – Nyuzi za usahihi kwa mihuri isiyoweza kuvuja
Inastahimili Joto – Inafaa kwa moto & mifumo ya maji baridi
Matumizi Mengi – Inafanya kazi na shaba, PEX, na mabomba ya PVC
Ubora uliothibitishwa – NSF/ANSI 61 & 372 iliyothibitishwa kwa maji ya kunywa
Mipangilio Nyingi – Viwiko vya mkono, vijana, mafungo, adapters zinapatikana

(Gas Brass Push Swivel Half Union Tube Fitting)

Specifications of Gas Brass Push Swivel Half Union Tube Fitting

Right here are the specs for the Gas Brass Press Swivel Half Union Tube Installation. This fitting connects tubing securely in gas applications. It uses brass. Brass stands up to rust well. Brass deals with high pressure also.

You obtain a push-to-connect end. This end slides onto your tubes quick. You require no special devices. Just press the tube in. It secures limited. It seals immediately. This functions wonderful with soft copper or light weight aluminum tubes. Check your tubing OD matches the fitting size.

The other end is a male BSPP thread. This thread screws into a women port. The whole suitable swivels easily. This swivel assists throughout installment. You avoid turning the tubes. You straighten every little thing quickly. Tightening up the nut compresses the seal. It makes a leak-proof joint.

Stress rating is crucial. This fitting deals with approximately 150 PSI working stress. Its ruptured pressure is much higher. Temperature level range is additionally crucial. It functions fine from -20 ° F up to +250 ° F. These specs fit many gas systems.

The product is lead-free brass. This meets risk-free alcohol consumption water policies. It also works fine for fuel gas, hewa, or inert gases. Do not use it with strong acids or chemicals. Brass will not stand up.

Sizes are common. Find them in 1/8″, 1/4″, 3/8″, and 1/2″ tube diameters. The thread side matches television dimension. So a 1/4″ tube fitting has a 1/4″ BSPP male string.

(Gas Brass Push Swivel Half Union Tube Fitting)

Applications of Gas Brass Push Swivel Half Union Tube Fitting

Gas brass push swivel half union tube fittings are important parts for attaching tubing in gas systems. They offer a fast and reputable method to sign up with pipelines. The brass product is durable and stands up to corrosion well. This makes them risk-free for various gases. The push-to-connect style makes installment extremely straightforward. You just press television right into the suitable. It locks firmly. No special tools are needed. This conserves considerable time throughout setting up or repair work.

The swivel function is very helpful. It enables the linked tube to rotate slightly. This stops kinks or stress on the tubes. It assists specifically in limited areas or where resonance takes place. The fifty percent union style suggests one side is a press installation. The other side has a threaded link. This lets you easily attach to existing equipment like valves or regulatory authorities. You obtain a secure web link without complex adapters.

These installations locate use in several areas requiring secure gas flow. Medical facilities utilize them for oxygen lines and clinical gas panels. They guarantee leak-free links important for client safety. Laboratories count on them for tool gas supplies. Accuracy gas control is vital for precise examination outcomes. Industrial settings use them widely. They link pneumatically-driven controls and operate machinery requiring clean, completely dry air. Breweries and drink plants use them for carbon dioxide lines and various other procedure gases. Food processing lines need reliable gas connections too.

Plumbing and heating and cooling technicians utilize these fittings for fuel gas lines. Gas or gas systems call for safe and secure joints. They are also typical in pressed air systems for devices. The push-to-connect layout quicken installment. Maintenance becomes easier because tubes separate quickly. The brass body endures typical system pressures and temperature levels. It takes care of common gases without weakening. These installations give a sensible service for dependable gas transfer. They combine convenience of usage with dependable performance across many applications.

Ufungashaji na Usafirishaji

Inategemea bidhaa na qty,tunaweza kufanya ufungaji wa coiling,mistari,ufungaji wa kifungu,masanduku au masanduku,nk.

Usafirishaji:Kwa bahari,reli,kwa hewa au kama ombi la mteja.

Wasifu wa Kampuni

Luoyang Datang Energy Tech Co., Ltd. ni mtengenezaji mkuu wa Kichina aliyebobea kwa mabomba ya plastiki ya ubora wa juu na vifaa vya kuweka. Ina vifaa vya kisasa vya uzalishaji wa kiotomatiki na kuungwa mkono na timu ya 200 wataalamu, tunatoa laini ya kina ya bidhaa inayojumuisha zaidi 150 aina ya mabomba ya plastiki na fittings iliyoundwa kwa ajili ya usambazaji wa maji na mifumo ya mifereji ya maji, usambazaji wa gesi, na mifumo ya joto ya sakafu. bidhaa zetu kuu ni pamoja na PVC Mabomba na Fittings, PE (HDPE) Mabomba na Fittings, Mabomba ya PPR na Fittings, na Mabomba ya Kupasha joto kwenye Ghorofa ya PEX.

Je, una maswali yoyote kuhusu Kuweka Bomba la HDPE, tafadhali usisite kuwasiliana nasi!

Simu.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Barua pepe: sales@pipesandfittings.net

Masharti ya Malipo

T/T,L/C kwa kuona,Muungano wa Magharibi & Paypal,nk.

5 FAQs of Gas Brass Push Swivel Half Union Tube Fitting

Hizi hapa 5 FAQs about Gas Brass Push Swivel Half Union Tube Fittings:

What is this fitting?
This is a connector for gas tubing. It’s made of brass. It lets you join two pieces of gas tubing. One end pushes onto the tube. The other end has a swivel union nut. The swivel lets you tighten it easily. It connects to another half union fitting.

Why use it for gas lines?
Brass hupinga kutu vizuri. This is important for gas systems. The push connection is fast. Huna haja ya zana maalum. The swivel nut makes installation simpler in tight spots. It ensures a secure, leak-free join for gas.

What materials is it made from?
It’s made from brass. Shaba ni nguvu. Brass handles gas safely. It doesn’t spark. This is crucial for gas applications. The seals inside are usually special gas-resistant polymers.

How much pressure can it handle?
Check the manufacturer’s rating. Different sizes have different ratings. Brass fittings are strong. They handle typical residential gas pressures fine. Never exceed the stated pressure rating. Safety is important with gas.

Je, ninaisakinisha?
Cut the tube cleanly. Deburr the end. Push the tube straight into the fitting. Push until it stops. You should feel it lock. Connect the swivel end to the mating half union. Hand-tighten the union nut first. Then use wrenches to tighten it fully. Always check for leaks after installation.

(Gas Brass Push Swivel Half Union Tube Fitting)