Akopọ ti 3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá

3 Piece Dn10 Dn25 CF8 Thread Ball Valve is engineered for superior performance in plumbing, ile ise, ati awọn ohun elo iṣowo. Se lati asiwaju-free, ipata-sooro idẹ, awọn falifu wọnyi ṣe idaniloju idaniloju pipẹ ati iṣakoso sisan ti o gbẹkẹle fun omi, gaasi, epo, ati awọn omi mimu miiran.

Pẹlu machining konge ati ki o logan ikole, wa idẹ falifu pese dan isẹ, o tayọ lilẹ, ati resistance to ga titẹ-ṣiṣe wọn apẹrẹ fun ibugbe, iṣowo, ati ise fifi ọpa awọn ọna šiše.

Key Features of 3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá

Idẹ Idẹ Ere - Asiwaju-ọfẹ, ipata-sooro, ati ti o tọ

Apẹrẹ-Imudaniloju Leak - Awọn edidi wiwọ fun iṣakoso ito to ni aabo

Titẹ giga & Resistance otutu – Išẹ igbẹkẹle labẹ awọn ipo ibeere

Isẹ Dan - Awọn imudani-rọrun-si-tan fun atunṣe sisan deede

Awọn ohun elo Wapọ – Ni ibamu pẹlu omi, gaasi, epo, ati HVAC awọn ọna šiše

Ọpọ Iwon & Awọn aṣayan Asopọmọra – Wa ni ¼” si 2″ awọn iwọn (NPT, Awọn okun BSP)

(3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá)

Specification of 3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá

This 3-piece ball valve comes in two sizes: DN10 (nipa 3/8 inch) and DN25 (nipa 1 inch). It features threaded connections for simple installation. The valve body uses CF8 stainless steel. This material resists rust. It handles tough conditions well.

The valve design uses three main pieces. Two end pieces connect to the pipe. The center piece holds the ball. This design allows easy cleaning. Itọju jẹ taara. You can take it apart without removing the whole valve from the pipe system.

Inu, a polished ball controls the flow. Yipada mimu 90 awọn iwọn. The ball rotates. It opens or shuts off the flow fast. The ball moves smoothly. The valve seals reliably. Leaks are prevented.

Seals use PTFE (Teflon). PTFE seats surround the ball. PTFE seals well. It handles heat. O koju awọn kemikali. The seals last a long time. Wọn nilo itọju diẹ.

The valve works under pressure. It handles PN40 ratings. This means 40 bar pressure at room temperature. Temperature limits are important. The valve handles -20°C to +180°C normally. PTFE seals define the max temperature. Check exact specs for your fluid.

Operation uses a simple lever handle. The lever shows the valve position clearly. Open is parallel to the pipe. Closed is perpendicular. You see the status instantly. A sturdy stem connects the lever to the ball. The stem won’t blow out under pressure.

These valves fit many applications. Use them for water. Use them for air. Use them for oil. Use them for steam. Use them for general chemicals. They work well in factories. They work well in processing plants. They work well in building systems. They work well where reliable shut-off matters.

(3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá)

Awọn ohun elo ti 3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá

Here’s the content about those ball valves:

People use these 3-piece ball valves a lot in factories and pipes. They come in small sizes, DN10 and DN25. That means about 10mm and 25mm across the pipe opening. The valves are made from CF8 stainless steel. This material fights rust well. It handles many chemicals. It also stands up to heat. You see these valves with threaded ends. This makes connecting them to pipes easy. Screw them on directly. No special flanges are needed.

These valves control flow. Yipada mimu 90 awọn iwọn. The ball inside spins. This opens or shuts off liquid or gas fast. They work reliably for on/off jobs. Don’t use them much for fine flow control. The full-port design helps. It means the hole through the ball is big. Almost as big as the pipe itself. Eyi dinku pipadanu titẹ. Stuff flows through easily.

Their tough CF8 build suits harsh places. Chemical plants need valves like this. They resist acids and bases. Water treatment uses them too. They handle clean water, maybe some wastewater. Food and drink factories pick them. Stainless steel is easy to clean. It meets hygiene rules. You find them in general industrial pipes. They move air, steam, or mild fluids.

The 3-piece design is smart. You can take the middle section out. This lets you fix the seals or ball easily. You don’t take the whole valve off the pipe. This saves time and work during upkeep. It cuts down on maintenance trouble.

These valves handle decent pressure. Check the exact rating for your job. They are strong but not for extreme force. Their compact size fits tight spots. The threaded ends simplify installation. You don’t need complex tools.

Iṣakojọpọ ati Gbigbe

Da lori awọn ọja ati qty,a le ṣe iṣakojọpọ ti coiling,yipo,iṣakojọpọ lapapo,apoti tabi apoti,ati be be lo.

Gbigbe:Nipa okun,oko oju irin,nipasẹ afẹfẹ tabi bi ibeere alabara.

Ifihan ile ibi ise

Awọn iṣiro ti ile-iṣẹ Luoyang Datang Energy Tech Co., Ltd., Ltd. jẹ olupese ti Ilu Kannada ti o ṣe amọja ni awọn paipu ṣiṣu to gaju ati awọn ohun elo. Ni ipese pẹlu ipinle-ti-ti-aworan aládàáṣiṣẹ gbóògì ila ati atilẹyin nipasẹ kan egbe ti 200 awọn ọjọgbọn, ti a nse ohun sanlalu ọja laini ni ninu 150 awọn oriṣi ti awọn paipu ṣiṣu ati awọn ohun elo ti a ṣe apẹrẹ fun ipese omi ati awọn eto idominugere, gaasi gbigbe, ati pakà alapapo awọn ọna šiše. Awọn ọja akọkọ wa pẹlu Awọn paipu PVC ati Awọn Fittings, PE (HDPE) Paipu ati Fittings, PPR Pipes ati Fittings, ati PEX Floor Alapapo Pipes.

O yẹ ki o ni awọn ibeere eyikeyi nipa HDPE Pipe Fitting, jọwọ ma ṣe ṣiyemeji lati kan si wa!

Tẹli.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Imeeli: sales@pipesandfittings.net

Awọn ofin sisan

T/T,L / C ni oju,Western Union & Paypal,ati be be lo.

5 FAQs ti 3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá

What material is the valve made from?
This valve uses CF8 stainless steel. CF8 is a common stainless steel grade. O koju ipata daradara. It handles many chemicals safely. This material is strong and lasts a long time.

Ohun ti titẹ le yi àtọwọdá mu?
Check the valve’s nameplate for its exact rating. Ni gbogbogbo, DN10 and DN25 CF8 threaded ball valves handle pressures up to 1000 PSI. This depends on the temperature. Always confirm the rating for your specific use.

How hot or cold can the fluid be?
CF8 stainless steel works well in many temperatures. Ni deede, these valves handle fluids from -20°F (-29°C) up to 400°F (204°C). Extreme temperatures might need special seals. Verify the limits for your application.

Is the valve easy to fix?
Bẹẹni, the 3-piece design makes repairs simple. You can take the valve body apart. You don’t need to remove the whole valve from the pipes. This lets you replace seals or the ball easily. O fi akoko ati owo pamọ.

How do I connect this valve to pipes?
This valve has threaded connections. The ends have standard pipe threads. You screw them directly into matching threaded pipe fittings. Make sure the threads are clean. Use thread sealant for a tight, jo-free asopọ.

(3 Nkan Dn10 Dn25 CF8 O tẹle Ball àtọwọdá)