Polyetylenové potrubní fitinky (High Density Polyethylene pipe fittings) is a pipe connection component made of high density polyethylene (high Density Polyethylene) as the core material, designed for matching HDPE pipe system.
Polyetylenové potrubní fitinky (High Density Polyethylene pipe fittings) is a pipe connection component made of high density polyethylene (high Density Polyethylene) as the core material, designed for matching HDPE pipe system. As a revolutionary product in the field of modern fluid transportation, it has become an ideal choice to replace traditional metal pipe fittings and PVC pipe fittings with its excellent corrosion resistance, impact resistance and long service life.
Podrobnosti o Polyetylenové potrubní fitinky
Type ofPolyetylenové potrubní fitinky: koleno (45°/90°), tee, reducing joint, flange joint, HDPE end cap, atd
Průměr Range: DN20-DN1200 (support non-standard customization)
Tlak Rnáš: PN6-PN25 (0.6-2.5MPa)
Ttechnický Parametry
Parameter
Norma PROTIalue
TestStandard
Density
0.945-0.965 g/cm³
ISO 1183
TensileStrength
≥22 MPa
ISO 527
jávliv Strength
≥20 kJ/m² (-20°C)
ISO 179
VicaSoftening Point
≥120°C
ISO 306
ÓxidationjánductionTime
≥20 min (200°C)
ISO/TR 10837
BlastingPzdroj
≥3 times nominal pressure
GB/T 6111
1. Environmental protection and non-toxic:in line with food grade material standards, suitable for drinking water transportation.
2. Silná odolnost proti korozi:resistant to acid and alkali, salt spray and chemical media erosion, no risk of rust.
3. Flexible seismic resistance:high elastic modulus can resist foundation settlement and earthquake impact.
4.Lightweight design: hmotnost je pouze 1/8 of the metal pipe fittings, and the transportation and installation cost is reduced by more than 50%.
5. Life of up to 50 let:maintain stable performance in -60°C to 60°C environment.
Specifikace Polyetylenové potrubní fitinky
1. Material characteristics
Raw material grade: PE100 and PE80 high density polyethylene, according to ISO 4427 norma
Additive technology: Add antioxidants and UV stabilizer, increase outdoor service life by 30%
Index tání: 0.2-1.4g/10 min (190°C/5kg), to ensure the reliability of hot melt connection
Reinforced socket structure: multi-layer wall thickness design, bearing capacity up to PN16 (1.6MPa)
Sealing system: integrated rubber seal ring or electric fusion type integrated seal
3. Způsob připojení
Spojení Type
Aplikaces
TechnologyFjedí
Hot melt docking
Large-caliber main pipeline
No leakage point and its strength is the same as that of pipe body
Elektrické fúzní připojení
Complex terrain construction
Intelligent temperature control to achieve accurate welding
Mechanical connection
Temporary project
Removable and reusable
Aplikaceof Polyethylene Pipe Fittings
1. Municipal engineering
Drinking water distribution network
Sewage collection and reclaimed water systems
Gas distribution network (subject to GB 15558)
2. Průmyslový aplikace
Chemical plant acid and alkali medium transportation
Mine tailings slurry pipeline
Food plant material handling lines
3. Zemědělské zavlažování
Drip/sprinkler systems
Greenhouse water and fertilizer integration
4. Special engineering
Submarine pipeline repair
Ground source heat pump circulation system
Landfill leachate collection
Balení a expedice
Packing: Záleží na produktech a množství,mohli bychom udělat balení cívky,rohlíky,balíkové balení,přepravky nebo krabice,atd.
Zásilka:Po moři,železnice,letecky nebo na přání zákazníka.
Profil společnosti
Luoyang Datang Energy Tech Co.Ltd byla založena v 2015 a nachází se v High-tech rozvojové zóně, Město Luoyang, pokrývá velkou plochu s nejmodernějším vybavením. Naše vláda nabízí podpůrné prostředí, včetně pohodlné dopravy a přístupu k základním zdrojům. Od počátku v 2015, zavázali jsme se k dokonalosti v oblasti trubek a tvarovek, neustále inovovat, aby vyhověl požadavkům trhu.
Pokud potřebujete PPR trubky a tvarovky,Neváhejte nás kontaktovat nás([email protected])
Platební podmínky
T/T,L/C na dohled,Western Union & Paypal,atd.
FAQ of Polyetylenové potrubní fitinky
Q1: Can Polyethylene Pipe Fittings be directly exposed to sunlight?
A: Standard products need to add anti-UV agent, outdoor service life can reach more than 20 let. It is recommended to use black pipe fittings (carbon black content ≥2%) in long-term sunshine environment.
Q2: How to judge the welding quality of electric fusion pipe fittings?
A: It can be verified by three points:
observation hole flanging height ≥1mm
no shrinkage phenomenon after cooling
Use the data recording function of the electric fusion welding machine to verify the welding parameters.
Q3: Jak se připojitPolyethylene Pipe Fittings and steel pipes?
A: It is recommended to use flanged transition joints. It should be noted that:
The end of the steel pipe should be treated with anti-corrosion;
The EPDM sealing gasket should be used;
The bolt torque should be controlled at 30-40N·m.
Q4: How long can Polyethylene Pipe Fittings be stored in stock?
A: The shelf life of unopened original package is 5 years in a dry and dark environment. It is recommended that unopened products be used within 12 měsíce.
Q5: Can different brands of Polyethylene Pipe Fittings be mixed?
A: Mixing is not recommended. Due to the difference in the melting index of raw materials may lead to the delamination of the welding interface, if it is necessary to mix, it is necessary to verify the welding process in advance.
