Overview of Custom Size Style 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter

Arddull Maint Custom 1/2″ CNPT Gwryw 1/4″ NPT Female Reducing Bushing Brass Pipe Fitting Reducer Adapter provides reliable, cysylltiadau parhaol ar gyfer eich holl anghenion system plymio a HVAC. Wedi'i gynhyrchu o ddi-blwm, aloi pres sy'n gwrthsefyll dezincification, mae'r ffitiadau hyn yn bodloni safonau diwydiant llym ar gyfer perfformiad a diogelwch. Perffaith ar gyfer cymwysiadau preswyl a masnachol, mae ein ffitiadau pres yn creu diogel, cymalau atal gollyngiadau mewn llinellau cyflenwi dŵr, systemau nwy, a gosodiadau aer cywasgedig.

Key Features of Custom Size Style 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter

Deunydd Premiwm – Di-blwm, Pres DZR ar gyfer ymwrthedd cyrydiad
Cysylltiadau Diogel – Edau manwl ar gyfer morloi atal gollyngiadau
Tymheredd Gwrthiannol – Yn addas ar gyfer poeth & systemau dŵr oer
Cymwysiadau Amlbwrpas – Yn gweithio gyda chopr, PEX, a phibellau PVC
Ansawdd Ardystiedig – NSF/ANSI 61 & 372 ardystiedig ar gyfer dŵr yfed
Cyfluniadau Lluosog – Penelinoedd, ti, cyplyddion, addaswyr ar gael

(Arddull Maint Custom 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter)

Specifications of Custom Size Style 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter

This fitting connects 1/2 inch male NPT pipe threads to 1/4 inch female NPT pipe threads. It reduces the pipe size. Mae'r corff yn bres solet. Mae pres yn gwrthsefyll cyrydiad yn dda. Brass handles water, olew, awyr, a nwy yn ddiogel. It works fine in cold or hot water lines. The pressure rating is 300 PSI ar dymheredd ystafell. Higher temperatures lower the safe pressure. The male end is 1/2 modfedd CNPT. The female end is 1/4 modfedd CNPT. Both ends use standard NPT tapered threads. Tapered threads create a seal when tightened. Use pipe thread sealant or Teflon tape. Apply sealant to the male threads. Mae hyn yn atal gollyngiadau. The fitting has a hex head. The hex head allows easy tightening. Use a wrench on the hex flats. Peidiwch â gordynhau. Overtightening damages the threads. Damaged threads cause leaks. The fitting is made for standard plumbing and pneumatic systems. It is not for high-pressure steam. The working temperature range is -65°F to 250°F. Do not use it beyond these temperatures. Extreme heat weakens the brass. Extreme cold makes brass brittle. The fitting is yellow brass. Yellow brass is common for plumbing. It has good strength. Mae'n peiriannau'n hawdd. The internal bore reduces smoothly. This minimizes flow restriction. Flow restriction causes pressure drop. Pressure drop affects system performance. The fitting is durable. Brass withstands vibration. It lasts a long time with normal use. Check fittings periodically for leaks. Replace fittings if damaged. Damaged fittings are unsafe. This bushing is a simple solution for size reduction. It connects different pipe sizes directly. Keep threads clean before assembly. Dirt causes poor seals. Proper installation ensures reliability. The fitting meets basic industry standards. It is suitable for residential and light commercial use. Heavy industrial use requires checking specific ratings. The design is straightforward. It has no moving parts. Mae cynnal a chadw yn fach iawn.

(Arddull Maint Custom 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter)

Applications of Custom Size Style 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter

This brass bushing connects pipes or fittings with different thread sizes. Mae ganddo a 1/2 inch male NPT thread on its larger end. Mae ganddo a 1/4 inch female NPT thread on its smaller end. This design reduces the flow path size. It steps down from the larger 1/2 inch connection to the smaller 1/4 inch connection.

The fitting is machined from solid brass. Mae pres yn cynnig cryfder da. Mae pres yn gwrthsefyll cyrydiad yn dda. This makes the bushing durable. Mae'n trin dŵr, awyr, olew, and fuel effectively. It works reliably in many systems. The material is suitable for standard plumbing pressures.

The male NPT thread screws directly into a 1/2 inch female port. The female NPT thread accepts a 1/4 inch male pipe end. NPT threads are tapered. Mae hyn yn creu dynn, leak-resistant seal when properly tightened. Use pipe thread sealant or tape. This ensures a perfect seal.

This reducer bushing is very common. It finds use in many applications. Connect different pipe sizes in water supply lines. Adapt components in compressed air systems. Install it in hydraulic lines carrying oil. Use it in fuel lines for machinery. It serves well in gas lines. It functions in various industrial equipment setups. It helps in irrigation systems. It works in automotive applications. The bushing provides a simple, reliable solution for size reduction.

Its compact design saves space. Mae gosod yn syml. Tighten the 1/2 inch male end into the larger fitting. Then screw the 1/4 inch male pipe into the bushing’s female end. The brass construction ensures longevity. It withstands typical operating temperatures and pressures. This bushing is a fundamental part for adapting pipe sizes efficiently.

Pacio a Cludo

Yn dibynnu ar y cynhyrchion a qty,gallem wneud y pacio o torchi,rholiau,pacio bwndel,cewyll neu focsys,etc.

Cludo:Ar y môr,rheilffordd,mewn awyren neu fel cais cwsmer.

Proffil Cwmni

Mae Luoyang Datang Energy Tech Co., Cyf. yn wneuthurwr Tsieineaidd blaenllaw sy'n arbenigo mewn pibellau a ffitiadau plastig o ansawdd uchel. Yn meddu ar y llinellau cynhyrchu awtomataidd diweddaraf ac wedi'u cefnogi gan dîm o 200 gweithwyr proffesiynol, rydym yn cynnig llinell gynnyrch helaeth sy'n cynnwys drosodd 150 mathau o bibellau a ffitiadau plastig a ddyluniwyd ar gyfer systemau cyflenwi dŵr a draenio, trawsyrru nwy, a systemau gwresogi llawr. Mae ein prif gynnyrch yn cynnwys Pibellau a Ffitiadau PVC, Addysg Gorfforol (HDPE) Pibellau a Ffitiadau, Pibellau a Ffitiadau PPR, a Phibellau Gwresogi Llawr PEX.

Os bydd gennych unrhyw ymholiadau ynglŷn â Gosod Pibellau HDPE, peidiwch ag oedi i gysylltu â ni!

Ffon.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Ebost: sales@pipesandfittings.net

Telerau Talu

T/T,L/C ar yr olwg,Undeb gorllewinol & Paypal,etc.

5 FAQs of Custom Size Style 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter

What does this brass fitting do?
It connects pipes of different sizes. It reduces a 1/2 inch male NPT thread connection down to a 1/4 inch female NPT thread connection. This lets you join a larger pipe to a smaller one.

Pam ei fod wedi'i wneud o bres?
Mae pres yn gwrthsefyll rhwd a chorydiad yn dda. This is important for water, awyr, a llinellau nwy. Brass handles pressure safely. It also lasts a long time in many conditions.

Pa bwysau y gall ei drin?
Gwiriwch y manylebau cynnyrch penodol. Brass fittings generally handle pressures common in home plumbing and air systems. Never exceed the maximum pressure rating listed. Using it beyond its rating is unsafe.

Sut ydw i'n ei osod?
Wrap pipe thread sealant tape around the male threads. Turn the fitting clockwise into the female port. Tighten it firmly with a wrench. Osgoi gor-dynhau. Over-tightening can crack the fitting or damage the threads.

Where would I use this reducer?
Use it anywhere you need to connect a 1/2 inch male pipe end to a 1/4 inch female pipe end. Common places include water lines, compressed air systems, some fuel lines, a gosodiadau dyfrhau. It works well for adapting equipment ports too.

(Arddull Maint Custom 1/2″ CNPT Gwryw 1/4″ CNPT Benyw Lleihau Bushing Pres Gosod Pibellau Lleihäwr Adapter)