Babban Ingancin HDPE Bututun Ruwa da Daidaitawa

HDPE (Babban Dinsity Polyethylene) Bututun Ruwa da Daidaitawa abubuwan da aka tsara don haɗawa, tuƙi, Branching ko rufe tsarin bututun polyethylene, kerarre da babban yawa polyethylene (HDPE) ko matsakaicin yawa polyethylene (MDPE), daidai da dacewa da bututun PE kuma ana amfani da su sosai a fagen jigilar ruwa.

HDPE Bututun Ruwa da Gabatarwar Daidaitawa

PE (polyethylene) kayan aikin bututu an tsara su don haɗawa, tuƙi, Branching ko rufe tsarin bututun polyethylene, kerarre da babban yawa polyethylene (HDPE) ko matsakaicin yawa polyethylene (MDPE), daidai da dacewa da bututun PE kuma ana amfani da su sosai a fagen jigilar ruwa.

HDPE Ruwa bututu da Fittingg Amfani

1. Juriya mai ƙarfi mai ƙarfi: juriya ga acid da alkali, gishiri fesa da sinadarai matsakaici yazawa, tsawon rayuwa fiye da haka 50 shekaru.

2. Juriya mai sassaucin ra'ayi: daidaitawa ga daidaitawar ƙasa da yanayin ƙarancin zafin jiki, rage haɗarin fashewar bututu.

3. Haske da sauƙin shigarwa: nauyi ne kawai 1/8 na karfe bututu kayan aiki, tallafawa hanyoyin haɗin kai iri-iri kamar narke mai zafi da narkewar lantarki.

4. Kariyar muhalli da mara guba: daidai da ka'idojin tsaftar ruwan sha (kamar GB/T 17219), babu nauyi karfe hazo.

5. Ƙananan farashin kulawa: bangon ciki yana santsi, juriyar juriya kadan ne, kuma amfani na dogon lokaci ba shi da sauƙi don sikelin.

HDPE bututun ruwa da ƙayyadaddun ƙayyadaddun kayan aiki

Gasket: Gasket kamar zobe ne da ake amfani da su don rufe haɗin kai tsakanin bututu. Suna zuwa da kayan aiki daban-daban da siffofi dangane da nau'in haɗin da kuke da shi.

Bututun gwiwar hannu: Gilashin bututu yana taimakawa canza alkiblar bututun. Suna zuwa a cikin kusurwa 90-digiri da 45-digiri, kuma iri biyu ne: dogon radius (wanda ya fi santsi) da gajeren radius (wanda ke ɗaukar ƙasa kaɗan amma yana haifar da ƙarin matsi).

Bututu Lanƙwasa: Lanƙwasawa bututu kamar masu lankwasa ne a cikin bututu. Ana amfani da su lokacin da kuke buƙatar canji mai sauƙi don guje wa haɓakar matsa lamba. Suna zuwa da girma dabam, kamar 3D da 5D, wanda ke nufin tsayin lanƙwan.

Bututu Tee: Tushen bututu yayi kama da harafin "T" kuma ana amfani dashi don raba magudanar ruwa daga babban bututun. Akwai iri daban-daban, kamar madaidaiciya tees (wadanda suke da diamita iri daya), rage hakora (wanda ke da ƙananan rassa), hana tees (ana amfani da shi a cikin bututu na musamman), dan uwa (wanda ke haɗa bututu a kusurwa 45-digiri don rage rikici).

Ketare: Giciye yana kama da alamar ƙari kuma yana da mashigai ɗaya da kantuna uku. Ana amfani da shi musamman a tsarin yayyafa wuta, ba na yau da kullun ba.

Masu Rage Bututu: Masu rage bututu suna ƙara kunkuntar bututu. Akwai nau'i biyu: concentric da eccentric. Wadanda ke da hankali suna kiyaye tsakiyar bututu a tsayi ɗaya. Ana amfani da su lokacin da manyan bututu guda biyu ke buƙatar zama iri ɗaya a tsakiyar tsarin. Masu eccentric suna taimakawa kiyaye kasan bututu a wani matakin, don haka saman waje na bututu yana tsayawa matakin.

Tufafin Bututu: A ƙarshen tsarin aikin famfo, akwai kafi. Yana rufe ƙarshen bututu don dakatar da zubewa.

Ƙarshen Stub: Ƙarshen ƙwanƙwasa yana yin abu iri ɗaya da madafan bututu amma ana amfani da su tare da flanges na haɗin gwiwa.

Ƙungiyoyin Bututu: Ana amfani da waɗannan don bututu tare da ƙananan matsa lamba waɗanda ke buƙatar ɗaukar su sau da yawa. Suna da sassa uku: karshen mace, karshen namiji, da goro. Na goro, tare da iyakar mace da namiji, yana haifar da hatimi mai ƙarfi.

Haɗin Bututu: Akwai iri uku: cika, rabi, da ragewa. Cikakken haɗin haɗin gwiwa suna haɗa ƙananan bututu. Rabin haɗin kai suna haɗa ƙaramin bututu zuwa babba. Rage haɗin haɗin gwiwa yana haɗa bututu biyu masu girma dabam dabam.

HDPE Pipe Fitting Matsayin Fasaha

Welding bututu dacewa: Saukewa: DN20-DN315, ƙarfin lantarki 39.5V± 0.5V, lokacin waldi atomatik calibration.

Hot narke butt dacewa: Saukewa: DN50-DN1200, dumama farantin zafin jiki 210 ℃ ± 10 ℃, matakin matsa lamba daidaitacce.

Mai haɗa injina: bakin karfe matsa nau'in, matsa lamba ≤1.6MPa, shigarwa mai sauri ba tare da kayan aiki ba.

HDPE Water Pipe and Fitting Aikace-aikace

1. Municipal Eaikin injiniya

Cibiyar sadarwa bututun ruwa: PE Ta, Flange soket, Ruwa guduma tasiri juriya, Rage yawan zubar ruwa.

Watsawar iskar gas: Yellow PE gas bututu mai dacewa, GB15558 takardar shaida, anti-static zane.

2. Masana'antu Scenaries

Chemical bututu: Acid da alkali mai juriya ta hanyoyi hudu da gwiwar hannu, goyon bayan PP/FRP composite lining.

Magudanar ruwan nawa: DN800 babban diamita bututu dacewa, mai jure juriya ga ɓarna barbashi.

3. Noma da Ena muhalli Pdaidaituwa

Tsarin ban ruwa drip: Ƙaramar-caliber PE kewaye, daidai rarraba, tanadin ruwa fiye da 30%.

Tarin najasa: Hatimin zoben hatimi ƙarfafa mai haɗin rijiyar dubawa, anti-leakage IP68.

Shiryawa da jigilar kaya

Ya dogara da samfuran da qty,za mu iya yin marufi na nadi,nadi,daure shiryawa,akwatuna ko kwalaye,da dai sauransu.

Jirgin ruwa:Ta teku,layin dogo,ta iska ko a matsayin bukatar abokin ciniki.

Bayanin Kamfanin

Abubuwan da aka bayar na Luoyang Datang Energy Tech Co., Ltd., Ltd. babban kwararre ne na kasar Sin wanda ya kware wajen samar da bututun filastik da kayan aiki masu inganci. An sanye shi da layukan samarwa masu sarrafa kansa na zamani da goyan bayan ƙungiyar 200 kwararru, Muna ba da layin samfur mai faɗi wanda ya ƙunshi sama 150 nau'ikan bututun filastik da kayan aikin da aka tsara don samar da ruwa da tsarin magudanar ruwa, iskar gas, da tsarin dumama ƙasa. Babban samfuranmu sun haɗa da bututun PVC da kayan aiki, PE (HDPE) Bututu da Kayan aiki, PPR bututu da kayan aiki, da PEX Floor Heating Pipes.

Idan kuna da wata tambaya game daHDPE Pipe Fitting, don Allah kar a yi shakka a tuntube mu!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Imel: sales@pipesandfittings.net

Sharuɗɗan Biyan kuɗi

T/T,L/C a gani,Western Union & Paypal,da dai sauransu.

HDPE Water Pipe and Fitting FAQ

Q1: Yadda za a zabi daidaitattun kayan aikin bututun PE?

A: Mataki 1: Tabbatar da diamita na bututun waje (misali. DE110) da SDR darajar (misali. Saukewa: SDR11).

Mataki 2: Zaɓi ƙimar PN bisa ga matsa lamba na tsarin (misali. PN16 yayi daidai da 1.6MPa).

Mataki 3: Zaɓi abu bisa ga halaye na matsakaici (gas yana buƙatar sassa na musamman na rawaya).

Q2: Menene wuraren aiki na haɗin narke mai zafi?

A: Tsaftace ƙarshen bututu don tabbatar da cewa babu mai;

Zazzabi na dumama farantin ana sarrafa a 210 ± 10 ℃;

Ka kiyaye matakin matsi na gindi, kar a motsa yayin sanyaya.

Q3: Za a iya haɗa kayan aikin bututun PE da bututun PVC?

A:Ba a ba da shawarar haɗin kai tsaye ba. Yana buƙatar haɗa shi ta hanyar adaftar PE/PVC kuma a rufe ta da injina tare da flange ko zaren.

Q4: Shin kayan aikin bututu suna goyan bayan matakan da ba daidai ba na al'ada?

A: Ee. Samar da ayyukan taswira na 3D, iya siffanta DN50-DN2000 sassa sassa, lokacin jagoranci 15-30 kwanaki.