Ikhtisar Katup Kuningan Pengaman Tekanan Tinggi Bagian Pendingin Katup Pelepas Pengaman Tekanan

High Pressure Safety Brass Valve Refrigeration Parts Pressure Safety Relief Valve is engineered for superior performance in plumbing, industri, dan aplikasi komersial. Terbuat dari bebas timah, kuningan tahan korosi, katup ini memastikan daya tahan tahan lama dan kontrol aliran air yang andal, gas, minyak, dan cairan lainnya.

Dengan pemesinan presisi dan konstruksi yang kokoh, katup kuningan kami memberikan kelancaran pengoperasian, penyegelan yang sangat baik, dan ketahanan terhadap tekanan tinggi—menjadikannya ideal untuk tempat tinggal, komersial, dan sistem perpipaan industri.

Fitur Utama dari Katup Kuningan Pengaman Tekanan Tinggi Bagian Pendingin Katup Pengaman Tekanan

Konstruksi Kuningan Premium – Bebas timah, tahan korosi, dan tahan lama

Desain Anti Bocor – Segel ketat untuk kontrol cairan yang aman

Tekanan Tinggi & Ketahanan Suhu – Kinerja yang andal dalam kondisi yang menuntut

Pengoperasian yang Lancar – Pegangan yang mudah diputar untuk penyesuaian aliran yang presisi

Aplikasi Serbaguna – Kompatibel dengan air, gas, minyak, dan sistem HVAC

Berbagai Ukuran & Opsi Koneksi – Tersedia dalam ¼” ke 2″ ukuran (NPT, benang BSP)

(Katup Kuningan Pengaman Tekanan Tinggi Bagian Pendingin Katup Pelepas Pengaman Tekanan)

Specification of High Pressure Safety Brass Valve Refrigeration Parts Pressure Safety Relief Valve

This brass pressure security relief valve secures refrigeration systems. It launches excess pressure immediately. This avoids harmful tools failing. High pressure constructs for several reasons. Obstructed lines occur. Temperature spikes happen. System overcharging is possible. This valve solves such issues.

The valve body uses resilient brass. Kuningan tahan karat dengan baik. It takes care of usual cooling agents accurately. Inner components are precision machined. An adjusted spring holds the shutoff closed. This spring establishes the important pressure release point. Stress surpassing the collection factor pushes versus the spring. The shutoff disc takes off its seat. Pressurized gas or liquid vents securely out. Flow continues until pressure drops listed below the collection factor. The spring then reseals the valve securely.

Secret specifications define its efficiency. The stress setting is critical. Usual settings are 450 PSIG or 500 PSIG. Specific setup depends upon system needs. The shutoff outlet size is usually 1/4 inch SAE flare. This makes sure conventional connection compatibility. The valve holds up against maximum pressures much over its release point. Products meet industry standards for cooling agent use. Temperature level tolerance covers normal refrigeration running arrays.

This component is vital security hardware. It shields compressors, kondensor, receivers, and piping. Fractured parts are tragic. Costly refrigerant loss happens. System downtime prices money. This shutoff uses affordable, trusted security. Penyiapannya sederhana. Place it straight on the secured vessel or vital line segment. Normal visual checks ensure it remains unblocked and operational. Never cap or obstruct the outlet port. This valve is a necessary guard in any responsible refrigeration or a/c system style. It gives comfort versus overpressure calamities.

(Katup Kuningan Pengaman Tekanan Tinggi Bagian Pendingin Katup Pelepas Pengaman Tekanan)

Aplikasi Katup Kuningan Pengaman Tekanan Tinggi Bagian Pendingin Katup Pengaman Tekanan

High pressure safety brass valves matter in refrigeration systems. Refrigeration systems build up pressure during operation. This pressure needs control. Too much pressure risks equipment damage. It can cause leaks or even explosions. Safety relief valves solve this problem. They automatically open if pressure climbs too high. Excess pressure releases safely. Then the valve closes again. Hal ini mencegah terjadinya kecelakaan. It protects people and property.

Brass construction makes these valves reliable. Brass handles high pressure well. It resists corrosion from refrigerants. Brass valves last longer in tough conditions. They withstand temperature changes too. Refrigeration systems get very cold or hot. Brass stays strong through these shifts.

These valves fit many refrigeration uses. Home air conditioners need them. Commercial freezers use them too. Industrial chillers require pressure protection. Refrigeration transport relies on safety valves. Any system holding refrigerant gas benefits. Proper pressure relief is non-negotiable.

Instalasinya mudah. Place the valve on the high-pressure side. Connect it to the discharge line. Ensure it vents to a safe area. Regular checks are vital. Test the valve periodically. Replace it if it shows wear. A faulty valve offers no protection.

Choosing the right valve is key. Match the valve’s pressure rating to your system. Check the temperature range it handles. Verify compatibility with your refrigerant type. Correct sizing prevents problems. An undersized valve won’t vent enough pressure. An oversized valve might leak prematurely. Follow manufacturer specifications exactly. Local codes often dictate valve requirements.

Good valves meet industry standards. Look for certifications like ASME or UL. These confirm the valve’s safety performance. Trusted brands provide documentation. They offer clear operating instructions. Proper maintenance keeps the valve ready.

Pengepakan dan Pengiriman

Tergantung pada produk dan qty,kita bisa membuat pengepakan melingkar,gulungan,pengepakan bundel,peti atau kotak,dll..

Pengiriman:Melalui laut,kereta api,melalui udara atau sebagai permintaan pelanggan.

Profil Perusahaan

Luoyang Datang Energy Tech Co., Ltd. adalah produsen Cina terkemuka yang mengkhususkan diri pada pipa dan perlengkapan plastik berkualitas tinggi. Dilengkapi dengan jalur produksi otomatis yang canggih dan didukung oleh tim 200 profesional, kami menawarkan lini produk ekstensif yang terdiri dari lebih dari 150 jenis pipa dan perlengkapan plastik yang dirancang untuk sistem pasokan air dan drainase, transmisi gas, dan sistem pemanas lantai. Produk utama kami meliputi Pipa dan Fitting PVC, PE (HDPE) Pipa dan Perlengkapannya, Pipa dan Fitting PPR, dan Pipa Pemanas Lantai PEX.

Jika Anda mempunyai pertanyaan mengenai Pemasangan Pipa HDPE, jangan ragu untuk menghubungi kami!

Telp.:0086-183 3790 0677

Wechat wechat: 0086-183 3790 0677

ada apa: 0086-183 3790 0677

E-mail: penjualan@pipesandfittings.net

Ketentuan Pembayaran

T/T,L/C pada pandangan,Serikat Barat & Paypal,dll..

5 FAQ dari Katup Kuningan Pengaman Tekanan Tinggi Bagian Pendingin Katup Pengaman Tekanan

High Pressure Safety Brass Valve FAQs

Where should I install this safety valve? Install it directly on the high-pressure side of your refrigeration system. Put it where pressure can build dangerously. Common spots are receiver outlets or compressor discharge lines.

What pressure should I set it to open? Set the valve’s opening pressure below the system’s maximum safe working pressure. Always follow the specific pressure rating listed on the valve body itself. Never guess the setting.

Why might the valve leak refrigerant? A small leak sometimes happens right after it opens and closes. This is often normal. Continuous leaking usually means the valve seat is damaged or dirty. Debris stuck inside can also cause leaks. You need to inspect or replace the valve.

How often must I test this safety valve? Test the valve at least once every year. Regular testing is crucial for safety. It confirms the valve will open correctly during a pressure emergency. Follow your equipment maintenance schedule strictly.

Why is the valve body made of brass? Brass handles corrosion well inside refrigeration systems. Ini dapat menahan tekanan tinggi dengan andal. Brass is durable for long-term safety use. It resists damage from common refrigerants and oils.

(Katup Kuningan Pengaman Tekanan Tinggi Bagian Pendingin Katup Pelepas Pengaman Tekanan)