LUOYANG DATANG ENERGY TECH CO.,LTD

HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply
PRODUCT PARAMETERS
Description
Introduction of HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply
High Density Polyethylene Pipe (PE Pipe) is a durable and flexible thermoplastic piping solution widely used in industrial, municipal, agricultural, and mining applications. Known for its excellent chemical resistance, high impact strength, and long service life, PE pipes are ideal for transporting water, gases, and other fluids under varying pressure conditions.
Key Features of HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply
Corrosion & Chemical Resistance
Resistant to rust, scale, and most chemicals, making it suitable for aggressive environments.
Lightweight & Flexible
Easy to transport and install due to low weight; flexibility allows bending without joints in certain applications.
High Impact Strength
Withstands extreme weather conditions and physical stress, reducing breakage risks.
Leak-Free Joints
Heat-fused joints create seamless connections, minimizing leakage risks.
Long Service Life
UV-resistant and abrasion-proof, with a lifespan exceeding 50 years under proper conditions.
Smooth Inner Surface
Reduces friction loss, improving flow efficiency and lowering energy costs.
Eco-Friendly
Non-toxic, recyclable, and compliant with drinking water safety standards.
Cost-Effective
Lower installation and maintenance costs compared to traditional materials (e.g., metal, concrete).
(HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply)
Specifications of HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply
This HDPE 45 Degree PE Arm joint is built for changing water circulation instructions in your supply lines. It attaches easily to high-density polyethylene pipes. The 45-degree angle provides a gentler turn than a sharper arm joint. This helps keep water stress solid and minimizes turbulence inside the pipeline.
The material is high-density polyethylene. HDPE is difficult things. It withstands rust from chemicals commonly found in water or dirt. HDPE won’t rust like metal pipes. It additionally takes care of influence well and doesn crack quickly under pressure. This elbow joint lasts a long period of time, even below ground.
You obtain this arm joint in conventional dimensions matching usual HDPE pipeline sizes. Common dimensions are DN20, DN25, DN32, DN40, DN50, DN63, DN75, DN90, DN110, DN160, DN200, DN250, DN315. Bigger sizes are typically offered also. Check the stress score (PN) needed for your system. PN6, PN8, PN10, PN12.5, and PN16 are typical options. The PN number tells you the maximum pressure the fitting can take care of securely.
Installation is uncomplicated. Usage typical techniques like butt combination, electrofusion, or mechanical fittings. Butt combination produces an irreversible, watertight joint by thawing the pipe and suitable ends together. Electrofusion utilizes fittings with integrated heating elements. Mechanical connections make use of compression or flanges. Constantly adhere to the producer’s guidelines for the joining technique you pick.
These elbows function completely in local water networks. They are great for industrial water systems. Contractors use them in household plumbing tasks. They are important for irrigation systems relocating water successfully. The smooth interior surface area stops scaling and build-up. This keeps water flowing freely over time. HDPE is light-weight contrasted to metal choices. This makes transportation and managing a lot easier on website. The material is additionally very versatile. It can manage ground activity without breaking.
(HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply)
Applications of HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply
HDPE 45-degree elbows are important parts for water pipes. They let you alter the pipeline instructions smoothly. This certain angle, 45 levels, is gentler than a sharp 90-degree turn. That helps keep water moving well and reduces stress loss inside the pipe. These arm joints are made from High-Density Polyethylene. This material is very strong and lasts a very long time.
HDPE plastic is excellent for water supply. It does not rust or rust like metal pipes can. Chemicals in soil or water will not harm it either. This material is also very adaptable. It can deal with ground motion without breaking. That implies less leakages and much less demand for repairs.
Installing these arm joints is straightforward. Employees join them to HDPE pipelines using warmth combination techniques. Butt combination and electrofusion prevail strategies. These methods produce a permanent, leak-proof connection. The joint becomes as strong as the pipeline itself. There’s no demand for adhesives or complicated mechanical parts. This makes the whole system very dependable.
These 45-degree joints work perfectly in several water scenarios. They are used in huge city water networks bringing water to homes and businesses. You discover them on farms for irrigation systems moving water to fields. Building sites utilize them for short-lived water lines. They are likewise helpful for repair work where you require to adjust existing pipeline paths.
HDPE fittings manage the continuous pressure inside water mains. They are difficult versus influences during setup or later. Their smooth internal surface keeps water flowing openly and stops product accumulation. This product is risk-free for lugging alcohol consumption water. It meets rigorous health and wellness standards. Utilizing HDPE elbow joints aids develop resilient, effective water systems. They are a practical selection for guiding water circulation accurately.
Packing and Shipment
Depends on the products and qty,we could make the packing of coiling,rolls,bundle packing,crates or boxes,etc.
Shipment:By sea,railway,by air or as customer’s request.
Company Profile
Luoyang Datang Energy Tech Co., Ltd. is a leading Chinese manufacturer specializing in high-quality plastic pipes and fittings. Equipped with state-of-the-art automated production lines and supported by a team of 200 professionals, we offer an extensive product line comprising over 150 types of plastic pipes and fittings designed for water supply and drainage systems, gas transmission, and floor heating systems. Our main products include PVC Pipes and Fittings, PE (HDPE) Pipes and Fittings, PPR Pipes and Fittings, and PEX Floor Heating Pipes.
Should you have any inquiries regarding HDPE Pipe Fitting, please do not hesitate to contact us!
Tel.:0086-183 3790 0677
Wechat: 0086-183 3790 0677
Whatsapp: 0086-183 3790 0677
Email: sales@pipesandfittings.net
Payment Terms
T/T,L/C at sight,Western Union & Paypal,etc.
5 FAQs of HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply
What is HDPE 45 Degree Elbow made from?
This fitting uses High-Density Polyethylene. HDPE is a strong plastic. It works well for water pipes. Water stays clean. The pipe won’t add bad tastes. It won’t add bad smells either. This material is safe for drinking water.
How much pressure can it handle?
The pressure rating depends on the pipe size. It also depends on the exact HDPE grade. Common ratings are PN10 or PN16. PN10 handles 10 bar pressure. PN16 handles 16 bar pressure. Always check the markings on your specific elbow. Match it to your pipe system’s needs.
How do I connect this elbow to pipes?
You connect it using heat fusion. Melt the pipe end. Melt the fitting socket. Push them together. They cool down. They form one solid piece. This joint is very strong. It won’t leak. It lasts a long time. Butt fusion works for bigger sizes. Electrofusion uses special fittings with wires.
Can it handle hot water?
HDPE works well with cold water. It handles warm water too. The usual maximum temperature is 45°C (113°F). Sometimes it handles 60°C (140°F) for short periods. Check the manufacturer’s details for your pipe. Don’t use it for constant high heat. Hot water can soften the plastic over time.
Is it resistant to chemicals?
Yes, HDPE resists many chemicals. This includes common things in soil. It includes things in water pipes too. It won’t rust. It won’t corrode. Acids don’t hurt it. Bases don’t hurt it. Salt water doesn’t hurt it. This makes it good for many uses. It lasts longer than metal in tough conditions.
(HDPE 45 Degree PE Elbow High-Density Polyethylene Pipe Fitting For Water Supply)
REQUEST A QUOTE
RELATED PRODUCTS

High Density Polyethylene Hdpe Pipe for Water Supply PN6-20 DN16mm 180mm 355mm 630mm PE100

High Density Polyethylene Pipe In Irrigation System

High Density Polyethylene Pipes Hdpe 4 Inch 5 Inch 6 Inch PE100 Hdpe Pipes Hdpe Water Pipe

Energy Saving High Density Polyethylene Tubing

High-Density HDPE Pipe Durable High-Pressure Water Supply Polyethylene Tube s

DN110 High Density Polyethylene Water Pipe for Agricultural Irrigation and Refuse Landfill
-
Email: sales@pipesandfittings.net
-
WeChat: +86 18337900677