Overview of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting provides reliable, μακροχρόνιες συνδέσεις για όλες τις ανάγκες σας σε υδραυλικά και συστήματα HVAC. Κατασκευασμένο από αμόλυβδο, κράμα ορείχαλκου ανθεκτικό στην απενοποίηση, αυτά τα εξαρτήματα πληρούν αυστηρά βιομηχανικά πρότυπα για απόδοση και ασφάλεια. Ιδανικό τόσο για οικιακές όσο και για εμπορικές εφαρμογές, τα ορειχάλκινα εξαρτήματά μας δημιουργούν ασφαλή, στεγανοί σύνδεσμοι σε γραμμές παροχής νερού, συστήματα αερίου, και εγκαταστάσεις πεπιεσμένου αέρα.

Key Features of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

Υλικό Premium – Χωρίς μόλυβδο, Ορείχαλκος DZR για αντοχή στη διάβρωση
Ασφαλείς συνδέσεις – Σπειρώματα ακριβείας για στεγανοποιητικά στεγανοποιητικά
Ανθεκτικό στη θερμοκρασία – Κατάλληλο για ζεστό & συστήματα κρύου νερού
Ευέλικτες Εφαρμογές – Λειτουργεί με χαλκό, PEX, και σωλήνες PVC
Πιστοποιημένη Ποιότητα – NSF/ANSI 61 & 372 πιστοποιημένο για πόσιμο νερό
Πολλαπλές διαμορφώσεις – Αγκώνες, μπλουζάκια, συνδέσμους, διαθέσιμοι προσαρμογείς

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

Προδιαγραφές του 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union fitting signs up with 2 3/8 inch outside diameter tubes. It connects them utilizing conventional 1/2 inch National Pipeline Thread Taper (NPT) ends. This suitable gives a safe and secure, watertight seal between tubing and threaded ports. It works without needing unique tools for the tube links.

The suitable body is strong brass. Brass uses good strength and resists corrosion well. It deals with usual fluids like water, αέρας, έλαιο, and fuel. The material executes reliably in numerous commercial and plumbing scenarios. Brass is resilient for lasting use.

Ο 3/8 inch OD compression side approves conventional tubing. The compression nut and ferrule produce the seal on the tube. Tightening the nut squeezes the ferrule onto the tube. This activity creates a solid, tight link. It stops leaks successfully. The ferrule holds the tube firmly.

Ο 1/2 inch NPT ends feature standard tapered pipeline strings. These strings screw into matching women NPT ports. Teflon tape or pipe sealer is utilized on the strings. This guarantees a limited seal versus leaks at the threaded joint. The strings satisfy market requirements.

Η εγκατάσταση είναι απλή. Cut the tubing cleanly and squarely. Move the compression nut onto television first. Then move the brass ferrule onto television. Put the tube end fully right into the fitting body. Hand-tighten the compression nut. Τελικά, tighten the nut additionally with a wrench. Do this till it feels snug. Stay clear of over-tightening. Over-tightening can damage the ferrule or tube. Link the NPT ends to the threaded ports securely. Usage sealant on the strings.

This fitting creates an irreversible connection point. It allows very easy disconnection of tubes later if needed. The union design allows you separate the tubing without turning it. This is useful for upkeep or modifications. The brass building takes care of modest stress and temperature level. It provides dependable service.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

Εφαρμογές του 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union attaches 3/8 inch outside diameter tubing to a 1/2 inch women NPT pipeline string. It joins various pipe kinds. Utilize it in several pipes and mechanical systems. It makes dependable links without needing pipe threads cut or flared. The suitable works utilizing compression seals. Slide the compression nut onto the tubing. Insert the tubes right into the fitting body. Tighten up the nut. This squeezes the brass ferrule versus the tube. It creates a strong, leak-proof seal. The other end screws straight into a 1/2 inch NPT female port. This prevails on valves, γοβάκια, or equipment ports.

Brass material handles water, αέρας, oils, and fuels well. It stands up to deterioration. This suitable matches reduced to medium pressure applications. It mounts rapidly. No unique tools are required past wrenches. Technicians locate it very easy to utilize. It saves time compared to soldering or threading pipe. Maintenance is easy. Loosen up the compression nut to disconnect the tube. Re-tighten to reconnect. Change the ferrule if needed after disassembly.

Discover this fitting in water lines for home appliances. It links ice manufacturers or fridges. It operates in hydronic heater signing up with copper tubing to central heating boiler valves. Use it in compressed air lines linking tubing to regulators or devices. It connects gas lines in oil burners or small engines. It fixes instrumentation lines carrying gases or liquids to gauges. It connects coolant lines in commercial equipment. Anywhere you require to transition from little tubing to a standard pipe thread, this installation is a functional option. Its integrity originates from the simple compression style. Brass construction makes certain resilience. It offers a functional link point.

Συσκευασία και αποστολή

Εξαρτάται από τα προϊόντα και την ποσότητα,θα μπορούσαμε να φτιάξουμε τη συσκευασία της περιέλιξης,ρολά,συσκευασία δέσμης,τελάρα ή κιβώτια,και τα λοιπά.

Αποστολή:Δια θαλάσσης,σιδηροδρομικός,αεροπορικώς ή κατόπιν αιτήματος του πελάτη.

Εταιρικό Προφίλ

Luoyang Datang Energy Tech Co., Ε.Π.Ε. είναι κορυφαίος Κινέζος κατασκευαστής που ειδικεύεται σε πλαστικούς σωλήνες και εξαρτήματα υψηλής ποιότητας. Εξοπλισμένο με υπερσύγχρονες αυτοματοποιημένες γραμμές παραγωγής και υποστηρίζεται από μια ομάδα 200 επαγγελματίες, προσφέρουμε μια εκτενή σειρά προϊόντων που περιλαμβάνει πάνω από 150 τύποι πλαστικών σωλήνων και εξαρτημάτων σχεδιασμένων για συστήματα ύδρευσης και αποχέτευσης, μεταφορά αερίου, και συστήματα θέρμανσης δαπέδου. Τα κύρια προϊόντα μας περιλαμβάνουν σωλήνες και εξαρτήματα PVC, Π.Ε (HDPE) Σωλήνες και εξαρτήματα, Σωλήνες και εξαρτήματα PPR, και Σωλήνες δαπέδου θέρμανσης PEX.

Εάν έχετε ερωτήσεις σχετικά με την τοποθέτηση σωλήνων HDPE, μη διστάσετε να επικοινωνήσετε μαζί μας!

Τηλ.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

E-mail: sales@pipesandfittings.net

Όροι πληρωμής

T/T,L/C εν όψει,Western Union & Paypal,και τα λοιπά.

5 Συχνές ερωτήσεις του 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

Προϊόν: 3/8″ OD x 1/2″ NPT Brass Compression Union Tube Fitting

Συχνές ερωτήσεις:

What tubes work with this fitting?
This fitting connects standard 3/8 inch outside diameter (OD) tubing. The tubing material must be compatible. Common choices are copper, αλουμίνιο, nylon, polyethylene, or polybutylene tubing. Avoid using hard stainless steel tubing. The compression design grips the tube’s outer surface.

What pressure can it handle?
This brass fitting handles significant pressure. Its maximum working pressure rating is typically 1,000 PSI with water at room temperature. Actual pressure limits depend on the specific tubing used. Always check your tubing’s pressure rating. The rating also depends on temperature and the fluid being carried. Higher temperatures usually mean lower pressure limits.

How do I install it?
Πρώτα, slide the compression nut onto the tube. Then slide the compression ferrule (brass ring) onto the tube. Insert the tube end fully into the fitting body. Make sure the tube is straight. Hand-tighten the compression nut onto the fitting body. Τελικά, tighten the nut about one to one-and-a-half turns more using a wrench. Do not over-tighten. Over-tightening can crush the ferrule or tube, causing leaks.

Can I reuse this fitting?
Reusing this fitting is possible but not recommended. The ferrule compresses tightly onto the tube during initial installation. This creates a permanent seal. Removing the tube often distorts the ferrule. Using the same ferrule again usually results in leaks. For best results, always use new ferrules. Reuse the nut and fitting body only with a new ferrule.

How does it seal?
The seal happens through compression. Tightening the nut squeezes the ferrule against the tube. The ferrule also presses against the fitting body. This creates a tight mechanical grip. It also forms a leak-proof seal between the ferrule, the tube, and the fitting body. No thread sealant is needed on the compression side. Apply thread sealant only to the male NPT threads.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)