Overview of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting provides reliable, koneksyon ki dire lontan pou tout sistèm plonbri ak HVAC ou bezwen. Manifaktire soti nan san plon, dezincification ki reziste alyaj kwiv, ekipman sa yo satisfè estanda endistri strik pou pèfòmans ak sekirite. Pafè pou tou de aplikasyon rezidansyèl ak komèsyal yo, ekipman an kwiv nou yo kreye an sekirite, jwenti ki pa koule nan liy rezèv dlo, sistèm gaz, ak enstalasyon lè konprese.

Key Features of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

Materyèl Premium – San plon, DZR kwiv pou rezistans korozyon
Koneksyon an sekirite – Fil presizyon pou sele-prèv koule
Tanperati rezistan – Apwopriye pou cho & sistèm dlo frèt
Aplikasyon versatile – Travay ak kwiv, PEX, ak tiyo PVC
Kalite sètifye – NSF/ANSI 61 & 372 sètifye pou dlo potab
Konfigirasyon miltip – Koud yo, tees, kouple, adaptè ki disponib

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

Specifications of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union fitting signs up with 2 3/8 inch outside diameter tubes. It connects them utilizing conventional 1/2 inch National Pipeline Thread Taper (NPT) ends. This suitable gives a safe and secure, watertight seal between tubing and threaded ports. It works without needing unique tools for the tube links.

The suitable body is strong brass. Brass uses good strength and resists corrosion well. It deals with usual fluids like water, lè, lwil oliv, and fuel. The material executes reliably in numerous commercial and plumbing scenarios. Brass is resilient for lasting use.

La 3/8 inch OD compression side approves conventional tubing. The compression nut and ferrule produce the seal on the tube. Tightening the nut squeezes the ferrule onto the tube. This activity creates a solid, tight link. It stops leaks successfully. The ferrule holds the tube firmly.

La 1/2 inch NPT ends feature standard tapered pipeline strings. These strings screw into matching women NPT ports. Teflon tape or pipe sealer is utilized on the strings. This guarantees a limited seal versus leaks at the threaded joint. The strings satisfy market requirements.

Enstalasyon se senp. Cut the tubing cleanly and squarely. Move the compression nut onto television first. Then move the brass ferrule onto television. Put the tube end fully right into the fitting body. Hand-tighten the compression nut. Finalman, tighten the nut additionally with a wrench. Do this till it feels snug. Stay clear of over-tightening. Over-tightening can damage the ferrule or tube. Link the NPT ends to the threaded ports securely. Usage sealant on the strings.

This fitting creates an irreversible connection point. It allows very easy disconnection of tubes later if needed. The union design allows you separate the tubing without turning it. This is useful for upkeep or modifications. The brass building takes care of modest stress and temperature level. It provides dependable service.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

Aplikasyon pou 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union attaches 3/8 inch outside diameter tubing to a 1/2 inch women NPT pipeline string. It joins various pipe kinds. Utilize it in several pipes and mechanical systems. It makes dependable links without needing pipe threads cut or flared. The suitable works utilizing compression seals. Slide the compression nut onto the tubing. Insert the tubes right into the fitting body. Tighten up the nut. This squeezes the brass ferrule versus the tube. Li kreye yon fò, leak-proof seal. The other end screws straight into a 1/2 inch NPT female port. This prevails on valves, ponp, or equipment ports.

Brass material handles water, lè, oils, and fuels well. It stands up to deterioration. This suitable matches reduced to medium pressure applications. It mounts rapidly. No unique tools are required past wrenches. Technicians locate it very easy to utilize. It saves time compared to soldering or threading pipe. Maintenance is easy. Loosen up the compression nut to disconnect the tube. Re-tighten to reconnect. Change the ferrule if needed after disassembly.

Discover this fitting in water lines for home appliances. It links ice manufacturers or fridges. It operates in hydronic heater signing up with copper tubing to central heating boiler valves. Use it in compressed air lines linking tubing to regulators or devices. It connects gas lines in oil burners or small engines. It fixes instrumentation lines carrying gases or liquids to gauges. It connects coolant lines in commercial equipment. Anywhere you require to transition from little tubing to a standard pipe thread, this installation is a functional option. Its integrity originates from the simple compression style. Brass construction makes certain resilience. It offers a functional link point.

Anbalaj ak chajman

Depann sou pwodwi yo ak kantite,nou ta ka fè anbalaj la nan bobin,woulo,pake pake,kès oswa bwat,elatriye.

chajman:Pa lanmè,tren,pa lè oswa kòm demann kliyan an.

Konpayi Profile

Luoyang Datang Enèji Tech Co., Ltd. se yon dirijan manifakti Chinwa ki espesyalize nan bon jan kalite tiyo plastik ak ekipman. Ekipe ak liy pwodiksyon otomatik modèn ak sipòte pa yon ekip 200 pwofesyonèl yo, nou ofri yon liy pwodwi vaste comprenant sou 150 kalite tiyo plastik ak ekipman ki fèt pou rezèv dlo ak sistèm drenaj, transmisyon gaz, ak sistèm chofaj etaj. Pwodwi prensipal nou yo gen ladan tiyo PVC ak Fittings, PE (HDPE) Tiyo ak Fittings, PPR Tiyo ak Fittings, ak PEX tiyo chofaj etaj.

Ou ta dwe gen nenpòt kesyon konsènan Fitting tiyo HDPE, tanpri pa ezite kontakte nou!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Imèl: sales@pipesandfittings.net

Regleman Peman

T/T,L/C nan je,Western Union & Paypal,elatriye.

5 FAQs of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

Pwodwi: 3/8″ OD x 1/2″ NPT Brass Compression Union Tube Fitting

FAQ:

What tubes work with this fitting?
This fitting connects standard 3/8 inch outside diameter (OD) tib. The tubing material must be compatible. Common choices are copper, aluminum, nylon, polyethylene, or polybutylene tubing. Avoid using hard stainless steel tubing. The compression design grips the tube’s outer surface.

Ki presyon li ka okipe?
This brass fitting handles significant pressure. Its maximum working pressure rating is typically 1,000 PSI with water at room temperature. Actual pressure limits depend on the specific tubing used. Always check your tubing’s pressure rating. The rating also depends on temperature and the fluid being carried. Higher temperatures usually mean lower pressure limits.

How do I install it?
Premye, slide the compression nut onto the tube. Then slide the compression ferrule (brass ring) onto the tube. Mete fen tib la konplètman nan kò a sere. Make sure the tube is straight. Hand-tighten the compression nut onto the fitting body. Finalman, tighten the nut about one to one-and-a-half turns more using a wrench. Do not over-tighten. Over-tightening can crush the ferrule or tube, causing leaks.

Can I reuse this fitting?
Reusing this fitting is possible but not recommended. The ferrule compresses tightly onto the tube during initial installation. This creates a permanent seal. Removing the tube often distorts the ferrule. Using the same ferrule again usually results in leaks. For best results, always use new ferrules. Reuse the nut and fitting body only with a new ferrule.

How does it seal?
The seal happens through compression. Tightening the nut squeezes the ferrule against the tube. The ferrule also presses against the fitting body. This creates a tight mechanical grip. It also forms a leak-proof seal between the ferrule, the tube, and the fitting body. No thread sealant is needed on the compression side. Apply thread sealant only to the male NPT threads.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)