Nyocha nke Ngwakọta Plumb na Ụdị Pipeline

Ngwakọta ọkpọkọ mmiri, maka njikọ threaded nke ọkpọkọ ọkpọkọ plastik, ọ bụrụ na enwere ntapu, naanị ịtọghe ya, kechie ihe kwesịrị ekwesị nke teepu raw gburugburu eri ahụ, and then tighten it again. For the plug-in type of plastic pipe fitting, if disassembly is required, the connection can be easily unplugged and the residual glue removed. Mgbe ahụ, apply polyethylene glue to the joint and reconnect as required to ensure a tight and leak-proof connection.

PE Water Supply Pipe Specifications

There are various specifications and models of PE water supply pipes available on the market, among which common ones include: DN15 (4 inch ọkpọkọ), DN20 (6 inch ọkpọkọ), DN25 (1 inch ọkpọkọ), DN32 (1 inch 2 ọkpọkọ), DN40 (1.5 sentimita asatọ), DN50 (2 sentimita asatọ), DN65 (2.5 sentimita asatọ), DN80 (3 sentimita asatọ), DN100 (4 sentimita asatọ), DN125 (5 sentimita asatọ), DN150 (6 sentimita asatọ), DN20 0 (8-inch ọkpọkọ) and DN250 (10-inch ọkpọkọ), wdg. These different-sized PE water pipes can meet various engineering and household water demands.

Ọkụ Fitting Specifications

Ngwakọta ọkpọkọ, as key components for connecting pipes, their specifications and dimensions are crucial. Common types of joints include external thread end type, ferrule type, and self-locking type, each of which has its specific usage and material. Agbanyeghị, regardless of the type, the division of specifications and dimensions is uniform, allowing for flexible adaptation to pipes of different diameters. Osote, we will list the various specifications of pipe fittings in detail in table form for your reference.

National standard pipe specifications

National standard water pipes, as national standardized water pipe products, have a wide variety of specifications and models. Common specifications of national standard water pipes range from DN15 to DN200, which can meet the installation and usage requirements in different occasions and demands.

Reinforced concrete drain pipes

As an important component of the drainage system, come in a wide variety of specifications. Common standard specifications include De40, 50, 63, 75, 90, 110, 125, 160, 200, 250, 315 na 400, wdg. These drain pipes are mainly used to handle tasks such as rainwater, sewage, farmland irrigation and drainage, and are a key part of the drainage system. The production process requires a series of specialized equipment, such as mixing systems, pipe molds, forming equipment, wdg., to ensure product quality and performance.

PVC Water Supply Pipe Specifications

PVC water pipes, as an essential part of modern homes, come in a wide variety of specifications. Common household water pipe sizes range from DN15 to DN50, and these pipes are not only used in household water supply systems but also widely applied in agriculture, industry and many other fields. The production process requires strict quality control to ensure the durability and safety of the product. N'otu oge ahụ, knowing the actual size and purpose of different specifications of water pipes is crucial for both purchase and installation.

Detailed Explanation of PVC Water Supply pipes

PVC water pipes, as a pipe material widely used in multiple fields, come in a wide variety of specifications. Common specifications include DN15 (4-inch ọkpọkọ), DN20 (6-inch ọkpọkọ), DN25 (1-inch ọkpọkọ), wdg. When purchasing and installing PVC water pipes, pay attention to the markings on the pipes. Ọmụmaatụ, “Φ25×1/2” indicates an outer diameter of 25, while the actual nominal diameter is DN20, ya bu, a 6-inch pipe. Knowing the size and purpose of these specifications, as well as their compatibility with different faucets, can help you make a wise choice.

Household pipe fittings

For household water pipe joints, the common outer diameter specifications of PPR pipes in the market include ten types: 20, 25, 32, 40, 50, 63, 75, 90, 110 na 160 millimeters. Agbanyeghị, for the average home renovation, only the three specifications of 20, 25, na 32 mm are sufficient. Galvanized pipes are also a common type of household pipe, with specifications including DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80 and DN100.

PE Water Supply Pipe Models

PE water pipes, as an important material for household water pipes, have a variety of model specifications to choose from. N'ozuzu, PE water pipes are classified into three grades: PE63, PE80, and PE100. The MRS Of PE63 is 6.3MPa, while the MRS Of PE80 and PE100 are 8.0MPa and 10.0MPa respectively. Since PE63 tubing is not suitable for buried piping, PE80 or PE100 tubing is generally preferred for PE water supply pipes. Knowing this information helps to make informed choices based on actual needs.

Onye na-ebu ihe

Ụlọ ọrụ Luoyang Datang Energy Tech Co., Ltd., Ltd. bụ onye na-emepụta ihe na China na-emepụta ọkachamara na ọkpọkọ plastik dị elu na akwa akwa. Ejiri ahịrị mmepụta akpaghị aka nke ọgbara ọhụrụ yana otu ndị otu na-akwado ya 200 ndị ọkachamara, anyị na-enye nnukwu ahịrị ngwaahịa mejupụtara 150 types of plastic pipes and fittings designed for water supply and drainage systems, nnyefe gas, na usoro kpo oku ala. Ngwaahịa anyị bụ isi gụnyere PVC Pipes na Fittings, PE (HDPE) Ọkụ na Ngwakọta, PPR ọkpọkọ na ihe ndozi, na PEX Floor kpo oku ọkpọkọ.

Ọ bụrụ na ị nwere ajụjụ ọ bụla gbasara ọkpọkọ PPR,Brass Valves na akwa ọla, biko egbula ịkpọtụrụ anyị!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

WhatsApp: 0086-183 3790 0677

Email: sales@pipesandfittings.net