Overview of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting provides reliable, 配管および HVAC システムのすべてのニーズに対応する長期接続. 鉛フリーで製造, 耐脱亜鉛黄銅合金, これらの継手は、性能と安全性に関する厳格な業界基準を満たしています。. 住宅用途と商業用途の両方に最適, 当社の真鍮製継手は安全性を高めます, 給水ラインの漏れ防止ジョイント, ガスシステム, および圧縮空気設備.

Key Features of 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

プレミアム素材 – 鉛フリー, 耐食性を高めるDZR真鍮
安全な接続 – 漏れ防止シール用の精密ねじ
耐熱性 – ホットに適しています & 冷水システム
多彩な用途 – 銅で動作します, PEX, および塩ビパイプ
認定された品質 – NSF/ANSI 61 & 372 飲料水として認定されている
複数の構成 – 肘, ティー, カップリング, アダプターが利用可能

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

仕様 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union fitting signs up with 2 3/8 inch outside diameter tubes. It connects them utilizing conventional 1/2 inch National Pipeline Thread Taper (NPT) ends. This suitable gives a safe and secure, watertight seal between tubing and threaded ports. It works without needing unique tools for the tube links.

The suitable body is strong brass. Brass uses good strength and resists corrosion well. It deals with usual fluids like water, 空気, 油, and fuel. The material executes reliably in numerous commercial and plumbing scenarios. Brass is resilient for lasting use.

の 3/8 inch OD compression side approves conventional tubing. The compression nut and ferrule produce the seal on the tube. Tightening the nut squeezes the ferrule onto the tube. This activity creates a solid, tight link. It stops leaks successfully. The ferrule holds the tube firmly.

の 1/2 inch NPT ends feature standard tapered pipeline strings. These strings screw into matching women NPT ports. Teflon tape or pipe sealer is utilized on the strings. This guarantees a limited seal versus leaks at the threaded joint. The strings satisfy market requirements.

インストールは簡単です. Cut the tubing cleanly and squarely. Move the compression nut onto television first. Then move the brass ferrule onto television. Put the tube end fully right into the fitting body. Hand-tighten the compression nut. ついに, tighten the nut additionally with a wrench. Do this till it feels snug. Stay clear of over-tightening. Over-tightening can damage the ferrule or tube. Link the NPT ends to the threaded ports securely. Usage sealant on the strings.

This fitting creates an irreversible connection point. It allows very easy disconnection of tubes later if needed. The union design allows you separate the tubing without turning it. This is useful for upkeep or modifications. The brass building takes care of modest stress and temperature level. It provides dependable service.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

の応用 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union attaches 3/8 inch outside diameter tubing to a 1/2 inch women NPT pipeline string. It joins various pipe kinds. Utilize it in several pipes and mechanical systems. It makes dependable links without needing pipe threads cut or flared. The suitable works utilizing compression seals. Slide the compression nut onto the tubing. Insert the tubes right into the fitting body. Tighten up the nut. This squeezes the brass ferrule versus the tube. It creates a strong, 漏れ防止シール. The other end screws straight into a 1/2 inch NPT female port. This prevails on valves, pumps, or equipment ports.

Brass material handles water, 空気, 油, and fuels well. It stands up to deterioration. This suitable matches reduced to medium pressure applications. It mounts rapidly. No unique tools are required past wrenches. Technicians locate it very easy to utilize. It saves time compared to soldering or threading pipe. Maintenance is easy. Loosen up the compression nut to disconnect the tube. Re-tighten to reconnect. Change the ferrule if needed after disassembly.

Discover this fitting in water lines for home appliances. It links ice manufacturers or fridges. It operates in hydronic heater signing up with copper tubing to central heating boiler valves. Use it in compressed air lines linking tubing to regulators or devices. It connects gas lines in oil burners or small engines. It fixes instrumentation lines carrying gases or liquids to gauges. It connects coolant lines in commercial equipment. Anywhere you require to transition from little tubing to a standard pipe thread, this installation is a functional option. Its integrity originates from the simple compression style. Brass construction makes certain resilience. It offers a functional link point.

梱包と発送

商品や数量により異なります,コイリングのパッキングを作ることができました,ロール,バンドル梱包,木箱または箱,等.

出荷:海沿い,鉄道,航空便または顧客の要求に応じて.

会社概要

洛陽大唐能源科技有限公司, 株式会社. 高品質のプラスチックパイプと継手を専門とする中国の大手メーカーです. 最先端の自動生産ラインを備え、チームによってサポートされています。 200 専門家, 私たちは以上を含む広範な製品ラインを提供しています 150 給水および排水システム用に設計されたプラスチック製のパイプおよび継手の種類, ガストランスミッション, および床暖房システム. 当社の主力製品には塩ビ管および継手などがあります。, PE (HDPE) パイプと継手, PPR パイプおよび継手, PEX床暖房パイプ。

HDPE パイプ継手に関するお問い合わせは, お気軽にお問い合わせください!

電話番号:0086-183 3790 0677

微信: 0086-183 3790 0677

ワッツアップ: 0086-183 3790 0677

電子メール: sales@pipesandfittings.net

支払い条件

T/T,一目でわかるL/C,ウエスタンユニオン & ペイパル,等.

5 よくある質問 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

製品: 3/8″ OD x 1/2″ NPT Brass Compression Union Tube Fitting

よくある質問:

What tubes work with this fitting?
This fitting connects standard 3/8 inch outside diameter (OD) tubing. The tubing material must be compatible. Common choices are copper, アルミニウム, nylon, ポリエチレン, or polybutylene tubing. Avoid using hard stainless steel tubing. The compression design grips the tube’s outer surface.

どれくらいの圧力に耐えられるか?
This brass fitting handles significant pressure. Its maximum working pressure rating is typically 1,000 PSI with water at room temperature. Actual pressure limits depend on the specific tubing used. Always check your tubing’s pressure rating. The rating also depends on temperature and the fluid being carried. Higher temperatures usually mean lower pressure limits.

どうやってインストールすればいいですか?
初め, slide the compression nut onto the tube. Then slide the compression ferrule (brass ring) onto the tube. Insert the tube end fully into the fitting body. Make sure the tube is straight. Hand-tighten the compression nut onto the fitting body. ついに, tighten the nut about one to one-and-a-half turns more using a wrench. Do not over-tighten. Over-tightening can crush the ferrule or tube, causing leaks.

Can I reuse this fitting?
Reusing this fitting is possible but not recommended. The ferrule compresses tightly onto the tube during initial installation. これにより永久シールが作成されます. Removing the tube often distorts the ferrule. Using the same ferrule again usually results in leaks. For best results, always use new ferrules. Reuse the nut and fitting body only with a new ferrule.

How does it seal?
The seal happens through compression. Tightening the nut squeezes the ferrule against the tube. The ferrule also presses against the fitting body. This creates a tight mechanical grip. It also forms a leak-proof seal between the ferrule, the tube, and the fitting body. No thread sealant is needed on the compression side. Apply thread sealant only to the male NPT threads.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)