Ki fittingnan ta wòrdu usá den tubonan di PPR? Kon e Tubonan di PPR Ta Uni?

Den edifisio di suministro di awa i sistema di drenahe, HVAC i transporte di líkido industrial, PPR (kopolimero aleatorio di polipropileno) pipe and fitting has become the mainstream choice for its corrosion resistance, anti-eskala, bida largu i otro karakterístika. Pero, an efficient and reliable pipeline system not only requires high-quality pipes, but also relies on scientifically designed parts combination and standardized construction technology.

PPR Pipe Ssistema Essential UNasesorionan Details 

The scientific selection of pipe fittings is the key to ensure the tightness and functionality of the system. The following are the six core fittings classification and selection guidelines:

1. Kopling

Function: linear extension of pipes or repair of local damage

Technical parameters:

Pressure grade needs to match the pipe (common S5/S4/S3.2 series)

Diameter range DN20-DN160, suitable for different flow requirements

Engineering application scenarios:

Extension reconstruction of main pipeline

Quick replacement of damaged pipe section (need to be cut accurately with pipe breaker)

2. 90°/45° Elbow

Hydrodynamic optimization design:

Smooth inner wall transition, reduce the pressure loss caused by turbulence (measured pressure drop <0.03MPa@2m/s)

R =1.5D Large radius of curvature reduces cavitation risk

Installation precautions:

Hot and cold water systems need to distinguish gray/white identification

Support spacing ≤50cm to prevent thermal expansion stress concentration

3. Equal/Reducing Tee

Branch system design points:

The diameter ratio between the main pipe and the branch pipe is ≤0.8 to ensure the uniformity of the shunt

The hot water system preferentially adopts the structure with loose joint, which is convenient for later maintenance

Special industrial applications:

Grado di kuminda 316 stainless steel lining tee (acid and alkali corrosion resistance)

Tee with sampling valve (pharmaceutical industry online testing requirements)

4. Flange Adaptor

Cross-material connection solutions:

EPDM rubber seal ring, suitable for -20℃~110℃ working conditions

PN16/PN20 flange pressure rating matching ISO standard

Construction specifications:

 Flange bolts should be progressively tightened diagonally (torque values refer to DIN 2501)

 Flange surface cleanliness requirements Sa2.5 (no oil, oxide layer)

5.Tapa di fin

Key components of pressure test:

Pressure test value =1.5 times working pressure, holding time ≥30min

Special pressure test cap with pressure gauge interface is recommended

Temporary plugging scheme:

Outdoor pipes should be made of UV anti-aging material (to avoid UV embrittlement)

6. Sindikato

Modular maintenance design:

Quick disassembly structure, supporting tool-free disassembly (patented snap design)

Medical grade system needs to be equipped with no dead cavity sanitary loose joint

Selection calculation:

Rated number of cycles ≥5000 (refer to EN 1254-3)

PPR Pipeline Hot Melt Connection Process Analysis

Professional grade hot melt welding is the core process to ensure zero leakage of pipeline system, and the following standardized operations should be strictly implemented:

1. Preparation stage before construction

Environmental control:

Operating temperature 5℃-40℃, humidity ≤80% (low temperature environment need to enable preheating program)

Set the dust isolation area (cleanliness level ISO 14644-8)

Equipment calibration:

Temperature controller error ±3℃ (check before starting daily)

Mold specification and pipe diameter matching tolerance ≤0.1mm

2. Six-step standardized operation method of hot melt welding 

1. Precise cutting

Use a special cutter to ensure that the end face perpendicality is ≤1°

Deburring treatment (45° chamfer recommended)

2 Mark the depth

Set the insertion depth by tube diameter (DN20=14mm, DN25=16mm, i asina por sigui)

Use an adjustable scriber to ensure marking accuracy

3. Set heating parameters

Refer to the welding parameter table (example: DN25 pipe, 260±5°C, heating time 7s)

Ambient temperature compensation (±1s/5℃) is required in winter and summer.

4. Synchronous welding

Two people work together to ensure that the pipe fittings advance in sync

Fused ring formation standard: uniform bright no bubbles

5. No stress butt joint

No rotation for linear insertion (deviation Angle ≤2°)

Maintain pressure until end of cooling time (30s for DN25)

6. Quality inspection

Welding seam width detection (standard value: pipe diameter ×0.15+0.5mm)

Profile inspection: the fusion surface should reach 2/3 of the thickness of the pipe wall

Solutions Fòf Special Working Conditions

Chikí space welding:

Right-angle welding machine (minimum operating space 30×30cm)

Use a reflector to observe the welding state

Working at height specification:

Build welding platform in accordance with OSHA standards

Equipped with anti-fall device and welding torch attachment

PPR Pipeline Ssistema UNdvanced Optimization Strategy

Professional technical solutions to improve system reliability:

1. Hydraulic calculation optimization

Pressure drop simulation using professional software such as PipeFlow

Branch pipe flow rate control: cold water ≤2m/s, hot water ≤1.5m/s

2. Thermal expansion compensation design

Fixed bracket spacing formula: L=0.15×ΔT×α×D

(ΔT= temperature difference, α= coefficient of linear expansion 0.15mm/m·K)

-Ω type compensator setting spacing: riser each layer, horizontal pipe ≤6m

3. Antibacterial pipeline system

Nano silver ion modified pipe (tasa antibakterial > 99.9%)

UV disinfection pipe special model (weather resistance grade UV-A)

Why choose our PPR solution?

As a piping system supplier with NSF, WRAS and CE certification, we provide:

Homogeneous tubing manufactured from HAUSEXX production line in Leifen, Germany

100% pressure-tested precision injection molded pipe fittings

15 years warranty

Proveedó

Luoyang Datang Energy Tech Co., Ltd. ta un fabrikante Chines lider ku ta spesialisá den tubonan i fittingnan di plèstik di kalidat haltu. Ekipá ku liñanan di produkshon outomatisá di último generashon i sostené pa un tim di 200 profeshonalnan, nos ta ofresé un liña di produkto ekstenso ku ta konsistí di mas ku 150 types of plastic pipes and fittings designed for water supply and drainage systems, transmishon di gas, i sistemanan di keintamentu di vloer. Nos produktonan prinsipal ta inkluí Tubonan i Fittingnan di PVC, PE (HDPE) Tubonan i Fittingnan, Tubonan i Fittingnan di PPR, i PEX Tubonan di Kalentamentu di Vloer.

Si bo tin kualke pregunta tokante Tubo di PVC,Tubo di PPR & Tubo di HDPE, por fabor no duda pa tuma kontakto ku nos!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Email: sales@pipesandfittings.net