Introduction of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

High Density Polyethylene Pipe (Pipe ng PE) ay isang matibay at nababaluktot na thermoplastic piping solution na malawakang ginagamit sa industriya, munisipyo, agrikultural, at mga aplikasyon sa pagmimina. Kilala sa mahusay na paglaban sa kemikal, mataas na lakas ng epekto, at mahabang buhay ng serbisyo, Ang mga pipe ng PE ay mainam para sa pagdadala ng tubig, mga gas, at iba pang mga likido sa ilalim ng iba't ibang kondisyon ng presyon.

Key Features of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Kaagnasan & Paglaban sa Kemikal

Lumalaban sa kalawang, sukat, at karamihan sa mga kemikal, ginagawa itong angkop para sa mga agresibong kapaligiran.

Magaan & Flexible

Madaling i-transport at i-install dahil sa mababang timbang; Ang kakayahang umangkop ay nagpapahintulot sa baluktot na walang mga kasukasuan sa ilang partikular na aplikasyon.

Lakas ng Mataas na Epekto

Lumalaban sa matinding kondisyon ng panahon at pisikal na stress, pagbabawas ng mga panganib sa pagkasira.

Mga Kasukasuan na Walang Leak

Ang mga pinagsanib na init ay lumilikha ng mga walang putol na koneksyon, pagliit ng mga panganib sa pagtagas.

Mahabang Buhay ng Serbisyo

UV-resistant at abrasion-proof, na may habang-buhay na lumampas 50 taon sa ilalim ng tamang kondisyon.

Makinis na Inner Surface

Binabawasan ang pagkawala ng alitan, pagpapabuti ng kahusayan ng daloy at pagpapababa ng mga gastos sa enerhiya.

Eco-Friendly

Hindi nakakalason, recyclable, at sumusunod sa mga pamantayan sa kaligtasan ng inuming tubig.

Cost-Effective

Mas mababang gastos sa pag-install at pagpapanatili kumpara sa mga tradisyonal na materyales (hal., metal, kongkreto).

(Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials)

Specifications of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Below’s the item details for HHM TR480AT HDPE Granules:

This is HHM TR480AT. It’s a high-density polyethylene (HDPE) plastic granule. The material is virgin grade. This indicates it’s new, extra plastic. It’s made especially for extrusion molding. This process forms thawed plastic. It’s best for making pipes.

The granules are created for pipe applications. They use superb stiffness. They also have excellent toughness. This combination manages stress well. It withstands effects also. The material flows efficiently when melted. This is crucial for constant pipeline manufacturing. It aids develop uniform pipeline walls. It stops defects.

HHM TR480AT has a high thaw circulation price. This number is around 0.25 g/10 min. It melts easily under heat. This makes handling reliable. It conserves power throughout production. The density is high. It’s about 0.955 g/cm THREE. High density indicates solid, rigid pipes. These pipes endure requiring usage.

The material performs well sought after problems. It withstands many chemicals. This includes acids and antacids. It deals with different solvents as well. It’s very durable outdoors. Sunshine and weather don’t damage it conveniently. Water absorption is very low. Pipelines stay dimensionally steady. They don’t swell or reduce a lot.

HHM TR480AT is trusted for pressure pipelines. It benefits supply of water pipes. It’s good for irrigation systems as well. Industrial fluid transport utilizes it. The color is all-natural. It looks milky white. You can include shade masterbatches quickly. This personalizes the last pipeline shade.

Key specs include the thaw flow rate. It’s 0.25 g/10 min (190 ° C, 5kg). Density is 0.955 g/cm ³. Tensile toughness at return is 26 MPa. Flexural modulus is 1200 MPa. The recommended thaw temperature is 200-220 ° C. The Vicat softening point is 125 ° C. It meets appropriate pipe product requirements.

(Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials)

Applications of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT is a leading pipeline grade virgin material. This HDPE granule provides strong performance for pipeline makers. It is created for extrusion molding procedures. The material melts easily. It streams smoothly via the extruder die. This produces regular pipeline shapes.

TR480AT provides excellent strength. It stands up to splitting effectively. Pipelines made from it manage high stress. They are dependable for demanding jobs. The product holds up against several chemicals. This is very important for industrial pipes. It also battles ecological stress fracturing. Mas matagal ang pipeline sa labas.

Water system systems use this HDPE thoroughly. Local water pipe need long lasting pipes. TR480AT pipelines are perfect right here. Sewer and drainage pipes benefit also. The product resists deterioration. It manages waste flow without damage. Gas distribution networks also depend on this grade. Its safety and strength are confirmed.

Industrial applications are common. Mining operations utilize slurry pipes made from TR480AT. The product deals with abrasive products well. Manufacturing facilities set up chemical lines with it. Processing plants need reliable fluid transport. This HDPE quality meets those requirements.

Agricultural uses are considerable. Farmers lay irrigation pipelines across areas. TR480AT pipelines resist sunshine and weather condition. They don’t break down swiftly. Aquaculture arrangements utilize pipelines for water flow. The product is secure for fish and plants.

Processing TR480AT is reliable. It squeezes out at excellent rates. Producers conserve energy. Less material waste happens. Manufacturing expenses remain reduced. The final pipes have smooth surface areas. They reveal high dimensional stability. Pipeline joints attach conveniently and safely. Installers trust the high quality.

Pag-iimpake at Pagpapadala

Depende sa mga produkto at dami,maaari naming gawin ang pag-iimpake ng likid,mga rolyo,bundle packing,crates o kahon,atbp.

Pagpapadala:Sa pamamagitan ng dagat,riles,sa pamamagitan ng hangin o bilang kahilingan ng customer.

Profile ng Kumpanya

Luoyang Datang Energy Tech Co., Ltd. ay isang nangungunang tagagawa ng Tsino na nagdadalubhasa sa mga de-kalidad na plastik na tubo at mga kabit. Nilagyan ng makabagong mga automated na linya ng produksyon at suportado ng isang pangkat ng 200 mga propesyonal, nag-aalok kami ng malawak na linya ng produkto na binubuo ng higit sa 150 mga uri ng mga plastik na tubo at mga kabit na idinisenyo para sa supply ng tubig at mga sistema ng paagusan, paghahatid ng gas, at mga sistema ng pagpainit sa sahig. Kabilang sa aming mga pangunahing produkto ang PVC Pipe and Fittings, PE (HDPE) Mga Pipe at Fitting, Mga Pipe at Fitting ng PPR, at PEX Floor Heating Pipes.

Kung mayroon kang anumang mga katanungan tungkol sa HDPE Pipe Fitting, mangyaring huwag mag-atubiling makipag-ugnay sa amin!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Email: sales@pipesandfittings.net

Mga Tuntunin sa Pagbabayad

T/T,L/C sa paningin,Western Union & Paypal,atbp.

5 FAQs of Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials

Here are five common questions about HDPE High Density Polyethylene Extrusion Molding HHM TR480AT HDPE Granules Pipe Grade Virgin HDPE Plastic Raw Materials:

What makes TR480AT granules good for pipe extrusion?
TR480AT is a high density polyethylene grade. Its specific melt flow properties are designed for pipe production. This material flows smoothly in extrusion machines. It forms strong, consistent pipes. The density gives the pipes good pressure resistance. They won’t crack easily under stress.

Is TR480AT suitable for making drinking water pipes?
Oo, it is. This is virgin HDPE material. It means it’s made without recycled content. TR480AT meets common standards for potable water contact. Hindi ito nagdaragdag ng mga nakakapinsalang kemikal sa tubig. Always check your local regulations for exact requirements.

Can TR480AT handle high temperatures?
It performs well within standard pipe application temperatures. HDPE like TR480AT softens around 120-130°C. For continuous use, keep it below 60°C. Its main strength is toughness at normal outdoor temperatures. It stays flexible in cold weather too.

Does this material need special certifications?
Oo, certifications are important for pipe applications. TR480AT typically complies with international standards like ISO 4427 for PE pipe materials. Manufacturers often provide test reports. These confirm properties like long-term strength and durability. Ask your supplier for the specific certificates.

Why is moisture control important before using TR480AT?
HDPE granules can absorb moisture from the air. Wet granules cause problems during extrusion. Steam bubbles form in the melted plastic. This creates defects in the finished pipe. Always store the bags in a dry place. Dry the granules properly right before you use them in the extruder. Proper drying ensures a smooth process and good pipe quality.

(Hdpe High Density Polyethylene Extrusion Molding HHM TR480AT Hdpe Granules Pipe Grade Virgin HDPE Plastic Raw Materials)