Superrigardo de 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting provides reliable, longdaŭraj konektoj por ĉiuj viaj akvotubaroj kaj HVAC-sistemaj bezonoj. Fabrikite el plumbo-libera, dezinkiĝo-imuna latuna alojo, ĉi tiuj ekipaĵoj plenumas striktajn industriajn normojn por efikeco kaj sekureco. Perfekta por kaj loĝdomaj kaj komercaj aplikoj, niaj latunaj aparatoj kreas sekuraj, likrezistaj juntoj en akvoprovizaj linioj, gassistemoj, kaj instalaĵoj de kunpremita aero.

Ŝlosilaj Trajtoj de 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

Supera Materialo – Senplumbo, DZR-latuno por koroda rezisto
Sekuraj Konektoj – Precizaj fadenoj por liki-rezistaj sigeloj
Temperaturo Imuna – Taŭga por varma & sistemoj de malvarma akvo
Versatilaj Aplikoj – Funkcias kun kupro, PEX, kaj PVC-tuboj
Atestita Kvalito – NSF/ANSI 61 & 372 atestita por trinkakvo
Multoblaj Agordoj – Kubutoj, tee-oj, kupladoj, disponeblaj adaptiloj

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

Specifoj de 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union fitting signs up with 2 3/8 inch outside diameter tubes. It connects them utilizing conventional 1/2 inch National Pipeline Thread Taper (NPT) ends. This suitable gives a safe and secure, watertight seal between tubing and threaded ports. It works without needing unique tools for the tube links.

The suitable body is strong brass. Brass uses good strength and resists corrosion well. It deals with usual fluids like water, aero, oleo, and fuel. The material executes reliably in numerous commercial and plumbing scenarios. Brass is resilient for lasting use.

La 3/8 inch OD compression side approves conventional tubing. The compression nut and ferrule produce the seal on the tube. Tightening the nut squeezes the ferrule onto the tube. This activity creates a solid, tight link. It stops leaks successfully. The ferrule holds the tube firmly.

La 1/2 inch NPT ends feature standard tapered pipeline strings. These strings screw into matching women NPT ports. Teflon tape or pipe sealer is utilized on the strings. This guarantees a limited seal versus leaks at the threaded joint. The strings satisfy market requirements.

Instalado estas simpla. Cut the tubing cleanly and squarely. Move the compression nut onto television first. Then move the brass ferrule onto television. Put the tube end fully right into the fitting body. Manpremu la kunpreman nukson. Fine, tighten the nut additionally with a wrench. Do this till it feels snug. Stay clear of over-tightening. Over-tightening can damage the ferrule or tube. Link the NPT ends to the threaded ports securely. Usage sealant on the strings.

This fitting creates an irreversible connection point. It allows very easy disconnection of tubes later if needed. The union design allows you separate the tubing without turning it. This is useful for upkeep or modifications. The brass building takes care of modest stress and temperature level. It provides dependable service.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)

Aplikoj de 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

This brass compression union attaches 3/8 inch outside diameter tubing to a 1/2 inch women NPT pipeline string. It joins various pipe kinds. Utilize it in several pipes and mechanical systems. It makes dependable links without needing pipe threads cut or flared. The suitable works utilizing compression seals. Slide the compression nut onto the tubing. Insert the tubes right into the fitting body. Tighten up the nut. This squeezes the brass ferrule versus the tube. Ĝi kreas fortan, likrezista sigelo. The other end screws straight into a 1/2 inch NPT female port. This prevails on valves, pumpiloj, or equipment ports.

Brass material handles water, aero, oleoj, kaj bruligas bone. It stands up to deterioration. This suitable matches reduced to medium pressure applications. It mounts rapidly. No unique tools are required past wrenches. Technicians locate it very easy to utilize. It saves time compared to soldering or threading pipe. Prizorgado estas facila. Loosen up the compression nut to disconnect the tube. Re-tighten to reconnect. Change the ferrule if needed after disassembly.

Discover this fitting in water lines for home appliances. It links ice manufacturers or fridges. It operates in hydronic heater signing up with copper tubing to central heating boiler valves. Use it in compressed air lines linking tubing to regulators or devices. It connects gas lines in oil burners or small engines. It fixes instrumentation lines carrying gases or liquids to gauges. It connects coolant lines in commercial equipment. Anywhere you require to transition from little tubing to a standard pipe thread, this installation is a functional option. Its integrity originates from the simple compression style. Brass construction makes certain resilience. It offers a functional link point.

Pakado kaj Sendo

Dependas de la produktoj kaj kvanto,ni povus fari la pakadon de bobenaĵo,ruliĝas,pakaĵpakado,kestoj aŭ skatoloj,ktp.

Sendo:Ĉe la maro,fervojo,per aero aŭ kiel peto de kliento.

Kompanio Profilo

Luoyang Datang Energy Tech Co., Ltd. estas ĉefa ĉina fabrikisto specialigita pri altkvalitaj plastaj pipoj kaj garnituro. Ekipita per plej modernaj aŭtomatigitaj produktadlinioj kaj subtenata de teamo de 200 profesiuloj, ni proponas ampleksan produktan linion konsistantan el super 150 specoj de plastaj tuboj kaj ekipaĵoj desegnitaj por akvoprovizado kaj drenadsistemoj, dissendo de gaso, kaj plankaj hejtsistemoj. Niaj ĉefaj produktoj inkluzivas PVC Pipojn kaj Fittings, PE (HDPE) Pipoj kaj Fittings, PPR Pipoj kaj Fittings, kaj PEX Floor Heating Pipes.

Ĉu vi havus demandojn pri HDPE Pipe Fitting, bonvolu ne hezitu kontakti nin!

Tel.:0086-183 3790 0677

Wechat: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

Retpoŝto: sales@pipesandfittings.net

Pagkondiĉoj

T/T,L/C ĉe vido,Okcidenta Unio & Paypal,ktp.

5 Oftaj Demandoj de 3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting

Produkto: 3/8″ OD x 1/2″ NPT Brass Compression Union Tube Fitting

Oftaj Demandoj:

What tubes work with this fitting?
This fitting connects standard 3/8 inch outside diameter (OF) tubing. The tubing material must be compatible. Common choices are copper, aluminio, nylon, polietileno, or polybutylene tubing. Avoid using hard stainless steel tubing. The compression design grips the tube’s outer surface.

Kian premon ĝi povas manipuli?
This brass fitting handles significant pressure. Its maximum working pressure rating is typically 1,000 PSI with water at room temperature. Actual pressure limits depend on the specific tubing used. Always check your tubing’s pressure rating. The rating also depends on temperature and the fluid being carried. Higher temperatures usually mean lower pressure limits.

Kiel mi instalu ĝin?
Unue, slide the compression nut onto the tube. Then slide the compression ferrule (brass ring) onto the tube. Insert the tube end fully into the fitting body. Make sure the tube is straight. Hand-tighten the compression nut onto the fitting body. Fine, tighten the nut about one to one-and-a-half turns more using a wrench. Do not over-tighten. Over-tightening can crush the ferrule or tube, causing leaks.

Can I reuse this fitting?
Reusing this fitting is possible but not recommended. The ferrule compresses tightly onto the tube during initial installation. This creates a permanent seal. Removing the tube often distorts the ferrule. Using the same ferrule again usually results in leaks. For best results, always use new ferrules. Reuse the nut and fitting body only with a new ferrule.

How does it seal?
The seal happens through compression. Tightening the nut squeezes the ferrule against the tube. The ferrule also presses against the fitting body. This creates a tight mechanical grip. It also forms a leak-proof seal between the ferrule, the tube, and the fitting body. No thread sealant is needed on the compression side. Apply thread sealant only to the male NPT threads.

(3/8 OD X 1/2 NPT Brass Compression Union Tube Fitting)