جو جائزو 3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ

3/8 ايڪس کان 1/2 NPT Brass Compression Union Tube Fitting provides reliable, توهان جي سڀني پلمبنگ ۽ HVAC سسٽم جي ضرورتن لاءِ ڊگھي عرصي وارا ڪنيڪشن. ليڊ فري مان ٺاهيل, dezincification-مزاحمتي پيتل مصر, اهي سامان ڪارڪردگي ۽ حفاظت لاء سخت صنعت جي معيار سان ملن ٿا. ٻنهي رهائشي ۽ تجارتي ايپليڪيشنن لاء مڪمل, اسان جي پيتل جي سامان کي محفوظ بڻائي ٿو, پاڻي جي فراهمي جي لائنن ۾ ليڪ پروف جوائنٽ, گئس سسٽم, ۽ compressed ايئر تنصيب.

جي اهم خاصيتون 3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ

پريميئم مواد – ليڊ فري, corrosion مزاحمت لاء DZR پيتل
محفوظ ڪنيڪشن – ليڪ پروف مهرن لاءِ سڌريل موضوع
حرارت جي مزاحمتي – گرم لاء مناسب & ٿڌي پاڻي جو نظام
ورسٽائل ايپليڪيشنون – ٽامي سان ڪم ڪري ٿو, پيڪس, ۽ پي وي سي پائپ
تصديق ٿيل معيار – NSF/ANSI 61 & 372 پيئڻ جي پاڻي لاء تصديق ٿيل
گهڻن ترتيبن – ڪنڌ, ٽيس, جوڙڻ, adapters دستياب

(3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ)

جي وضاحت 3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ

This brass compression union fitting signs up with 2 3/8 inch outside diameter tubes. It connects them utilizing conventional 1/2 inch National Pipeline Thread Taper (اين پي ٽي) ختم ٿئي ٿو. This suitable gives a safe and secure, watertight seal between tubing and threaded ports. It works without needing unique tools for the tube links.

The suitable body is strong brass. Brass uses good strength and resists corrosion well. It deals with usual fluids like water, هوا, تيل, and fuel. The material executes reliably in numerous commercial and plumbing scenarios. Brass is resilient for lasting use.

جي 3/8 inch OD compression side approves conventional tubing. The compression nut and ferrule produce the seal on the tube. Tightening the nut squeezes the ferrule onto the tube. This activity creates a solid, tight link. اهو ڪاميابيءَ سان ليڪ کي روڪي ٿو. The ferrule holds the tube firmly.

جي 1/2 inch NPT ends feature standard tapered pipeline strings. These strings screw into matching women NPT ports. Teflon tape or pipe sealer is utilized on the strings. This guarantees a limited seal versus leaks at the threaded joint. The strings satisfy market requirements.

تنصيب سڌو آهي. Cut the tubing cleanly and squarely. Move the compression nut onto television first. Then move the brass ferrule onto television. Put the tube end fully right into the fitting body. Hand-tighten the compression nut. آخرڪار, tighten the nut additionally with a wrench. Do this till it feels snug. وڌيڪ تنگ ڪرڻ کان پري رهو. Over-tightening can damage the ferrule or tube. Link the NPT ends to the threaded ports securely. Usage sealant on the strings.

This fitting creates an irreversible connection point. It allows very easy disconnection of tubes later if needed. The union design allows you separate the tubing without turning it. This is useful for upkeep or modifications. The brass building takes care of modest stress and temperature level. It provides dependable service.

(3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ)

جي درخواستون 3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ

This brass compression union attaches 3/8 inch outside diameter tubing to a 1/2 inch women NPT pipeline string. It joins various pipe kinds. Utilize it in several pipes and mechanical systems. It makes dependable links without needing pipe threads cut or flared. The suitable works utilizing compression seals. Slide the compression nut onto the tubing. Insert the tubes right into the fitting body. Tighten up the nut. This squeezes the brass ferrule versus the tube. اهو هڪ مضبوط بڻائي ٿو, ليڪ پروف مهر. The other end screws straight into a 1/2 inch NPT female port. This prevails on valves, پمپس, or equipment ports.

Brass material handles water, هوا, تيل, and fuels well. It stands up to deterioration. This suitable matches reduced to medium pressure applications. It mounts rapidly. No unique tools are required past wrenches. Technicians locate it very easy to utilize. It saves time compared to soldering or threading pipe. سار سنڀال آسان آهي. Loosen up the compression nut to disconnect the tube. Re-tighten to reconnect. Change the ferrule if needed after disassembly.

Discover this fitting in water lines for home appliances. It links ice manufacturers or fridges. It operates in hydronic heater signing up with copper tubing to central heating boiler valves. Use it in compressed air lines linking tubing to regulators or devices. It connects gas lines in oil burners or small engines. It fixes instrumentation lines carrying gases or liquids to gauges. It connects coolant lines in commercial equipment. Anywhere you require to transition from little tubing to a standard pipe thread, this installation is a functional option. Its integrity originates from the simple compression style. Brass construction makes certain resilience. It offers a functional link point.

پيڪنگ ۽ پهچائڻ

مصنوعات ۽ مقدار تي منحصر آهي,اسان coiling جي packing ڪري سگهو ٿا,رول,بنڊل پيڪنگ,خانا يا خانا,وغيره.

ترسيل:سمنڊ ذريعي,ريلوي,هوائي ذريعي يا صارف جي درخواست جي طور تي.

ڪمپني پروفائل

Luoyang Datang Energy Tech Co., لميٽيڊ. اعلي معيار جي پلاسٽڪ پائپ ۽ سامان ۾ ماهر هڪ معروف چيني ڪارخانو آهي. جديد ترين خودڪار پيداوار لائنن سان ليس ۽ هڪ ٽيم جي مدد سان 200 پيشه ور, اسان پيش ڪريون ٿا هڪ وسيع پراڊڪٽ لائن جنهن تي مشتمل آهي 150 پاڻي جي فراهمي ۽ نيڪال جي نظام لاء ٺهيل پلاسٽڪ پائپ ۽ سامان جا قسم, گئس ٽرانسميشن, ۽ فرش حرارتي نظام. اسان جي مکيه پروڊڪٽس شامل آهن پي وي سي پائپ ۽ سامان, پي اي (HDPE) پائپ ۽ سامان, پي پي آر پائپ ۽ سامان, ۽ PEX فرش حرارتي پائپ.

ڇا توھان کي HDPE پائپ فٽنگ جي حوالي سان ڪا به پڇا ڳاڇا ڪرڻ گھرجي, مهرباني ڪري اسان سان رابطو ڪرڻ ۾ سنکوڪ نه ڪريو!

ٽيليفون.:0086-183 3790 0677

ويچٽ: 0086-183 3790 0677

Whatsapp: 0086-183 3790 0677

اي ميل: sales@pipesandfittings.net

ادائگي جون شرطون

ٽي/ٽي,L/C نظر ۾,ويسٽرن يونين & پي پال,وغيره.

5 FAQs of 3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ

پيداوار: 3/8″ OD x 1/2″ اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ

FAQs:

What tubes work with this fitting?
This fitting connects standard 3/8 inch outside diameter (آف) نلڪي. The tubing material must be compatible. Common choices are copper, المونيم, nylon, polyethylene, or polybutylene tubing. Avoid using hard stainless steel tubing. The compression design grips the tube’s outer surface.

اهو ڪهڙو دٻاءُ برداشت ڪري سگهي ٿو?
This brass fitting handles significant pressure. Its maximum working pressure rating is typically 1,000 PSI with water at room temperature. Actual pressure limits depend on the specific tubing used. Always check your tubing’s pressure rating. The rating also depends on temperature and the fluid being carried. Higher temperatures usually mean lower pressure limits.

مان ان کي ڪيئن انسٽال ڪريان?
پهريون, slide the compression nut onto the tube. Then slide the compression ferrule (brass ring) onto the tube. ٽيوب جي پڇاڙيءَ کي مڪمل طور تي فٽ ٿيل جسم ۾ داخل ڪريو. Make sure the tube is straight. Hand-tighten the compression nut onto the fitting body. آخرڪار, tighten the nut about one to one-and-a-half turns more using a wrench. وڌيڪ تنگ نه ڪريو. Over-tightening can crush the ferrule or tube, causing leaks.

Can I reuse this fitting?
Reusing this fitting is possible but not recommended. The ferrule compresses tightly onto the tube during initial installation. هي هڪ مستقل مهر ٺاهي ٿو. Removing the tube often distorts the ferrule. Using the same ferrule again usually results in leaks. بهترين نتيجا لاء, always use new ferrules. Reuse the nut and fitting body only with a new ferrule.

How does it seal?
The seal happens through compression. Tightening the nut squeezes the ferrule against the tube. The ferrule also presses against the fitting body. This creates a tight mechanical grip. It also forms a leak-proof seal between the ferrule, the tube, and the fitting body. No thread sealant is needed on the compression side. Apply thread sealant only to the male NPT threads.

(3/8 ايڪس کان 1/2 اين پي ٽي پيتل ڪمپريشن يونين ٽيوب فٽنگ)