の紹介ポリプロピレン電融カプラ電融 PPR 継手

PPRパイプ (正式名称 ポリプロピレンランダムコポリマーパイプ, 高品質ランダムコポリマーポリプロピレン原料から作られた高性能プラスチックパイプです。. 高温耐性があるため、, 耐圧性, 環境保護と非毒性, 温水および冷水システムの構築に広く使用されています, HVAC エンジニアリング, 飲料水輸送および工業用流体輸送, 従来の金属パイプの理想的な代替品です.

Characteristics and Features of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

高温・高圧耐性

長期使用温度は70℃に達する可能性があります, 95℃までの短期高温耐性, 優れた耐圧性能 (共通圧力レベル PN20, PN25).

環境保護と健康

原材料は純粋で無毒です, 飲料水基準を満たしている (FDAなど, EN ISOおよびその他の認証), 細菌を繁殖させないでください, 水質の安全性を確保する.

腐食とスケール防止

耐酸性および耐アルカリ性, 強い耐薬品性, 滑らかな内壁, 拡張するのは簡単ではない, 安定した流量の長期使用.

ホットメルト接続, 強力なシール

ホットメルトソケット技術を採用, 接続部での漏れの危険性がありません, 統合構造によりシステムの信頼性が向上します.

軽量で施工も簡単

重さはただ 1/8 金属パイプの, 輸送や設置に便利です, 人件費の削減.

長寿命でメンテナンスの手間がかかりません

設計耐用年数は以上です 50 年, メンテナンスフリー, そして全体的なコストも低い.

省エネと保温

熱伝導率が低い (のみ 1/200 金属パイプの), 熱損失を低減し、温水システムに適しています。.

(ポリプロピレン電融カプラ電融 PPR 継手)

Specifications of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Polypropylene Electrofusion Coupler fittings connect PPR pipes securely. They use electrofusion technology for strong joints. The fittings are made from polypropylene. This material resists chemicals well. It handles high temperatures too. Electrofusion works with built-in heating wires. Apply electric current to the wires. The heat melts the polypropylene. The pipe and fitting fuse together. The joint cools into a solid bond. This joint is leak-proof. It matches the pipe strength. These couplers come in standard sizes. 一般的なサイズは20mmです, 25mm, 32mm, 40mm, 50mm, 63mm. Pressure ratings include PN10, PN16, PN20. PN20 supports 20 bar pressure at 20°C. They handle temperatures from 0°C to 95°C. Short-term peaks up to 110°C are acceptable. The fittings meet international standards. ISO 15874 およびDIN 8077/8078 apply. This ensures reliability and safety. Use these couplers in plumbing systems. They work for hot water lines. Cold water applications suit them too. Heating systems like radiators use them. Industrial fluid transport benefits from them. Electrofusion offers clear advantages. Joints are permanent and uniform. インストールは簡単です. You need an electrofusion machine. Clean the pipe ends first. Insert the pipe into the coupler. Connect the machine leads. Input the correct fusion parameters. Start the fusion cycle. The machine controls heating time. It signals when fusion finishes. Cool the joint naturally. Proper installation prevents failures. Follow the manufacturer guidelines exactly. This ensures system longevity. These fittings save time during projects. They reduce maintenance needs later.

(ポリプロピレン電融カプラ電融 PPR 継手)

Applications of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

Polypropylene electrofusion couplers join PPR pipes securely. They use electricity for the connection. Heat melts the plastic inside the coupler. The melted plastic fuses the pipe ends together. This creates one solid piece. The joint becomes very strong. It is leak-proof. Electrofusion is reliable for joining pipes.

These fittings work well in many places. They connect pipes in hot and cold water systems. People use them in homes. They connect pipes under floors or inside walls. Builders install them in apartment blocks. Factories rely on them for process lines. They are good for chemical transport. These couplers handle industrial fluids safely. They are common in irrigation projects for farms. Municipal water supply networks use them extensively. Gas distribution systems also employ these fittings.

インストールは簡単です. Prepare the pipe ends first. Cut the pipe cleanly. Remove any burrs. Measure the insertion depth carefully. Mark this depth on the pipe. Clean the pipe surface thoroughly. Scrape off the outer layer lightly. Wipe the area with a clean cloth. Avoid any grease or dirt. Position the coupler over the pipe ends. Align the pipes correctly inside it. Clamp the assembly firmly. Connect the electrofusion machine. Follow the machine’s instructions exactly. Enter the correct fusion parameters. Start the fusion cycle. The machine sends power to the coupler’s coil. The coil heats up. The plastic melts and fuses. Wait for the cooling time. Do not disturb the joint during cooling. Disconnect the machine after the cycle finishes. Check the joint visually. Ensure a proper bead forms around the pipe ends. This bead confirms good fusion. Always disconnect power before touching the coupler post-fusion.

梱包と発送

商品や数量により異なります,コイリングのパッキングを作ることができました,ロール,バンドル梱包,木箱または箱,等.

出荷:海沿い,鉄道,航空便または顧客の要求に応じて.

会社概要

洛陽大唐能源科技有限公司, 株式会社. 高品質のプラスチックパイプと継手を専門とする中国の大手メーカーです. 最先端の自動生産ラインを備え、チームによってサポートされています。 200 専門家, 私たちは以上を含む広範な製品ラインを提供しています 150 給水および排水システム用に設計されたプラスチック製のパイプおよび継手の種類, ガストランスミッション, および床暖房システム. 当社の主力製品には塩ビ管および継手などがあります。, PE (HDPE) パイプと継手, PPR パイプおよび継手, PEX床暖房パイプ。

HDPE パイプ継手に関するお問い合わせは, お気軽にお問い合わせください!

電話番号:0086-183 3790 0677

微信: 0086-183 3790 0677

ワッツアップ: 0086-183 3790 0677

電子メール: sales@pipesandfittings.net

支払い条件

T/T,一目でわかるL/C,ウエスタンユニオン & ペイパル,等.

5 FAQs of Polypropylene Electrofusion Coupler Electro Fusion PPR Fittings

What is a Polypropylene Electrofusion Coupler?
It’s a special fitting for joining PPR pipes. The coupler has built-in heating wires. You connect it using an electrofusion machine. これにより、強力な, permanent bond between pipes.

How does the Electrofusion process work?
初め, clean and trim the pipe ends. Insert them into the coupler. Connect the electrofusion machine to the coupler’s terminals. The machine sends electricity. This melts the inside of the coupler and the pipe surface. The melted material fuses together. After cooling, it forms a solid joint.

What are the main advantages of Electrofusion PPR fittings?
彼らはとても信頼できます. The fusion is leak-proof. Installation is quick. It needs less equipment than traditional welding. These fittings work well in tight spaces. They handle high pressure and temperature.

Where are Electrofusion Couplers used?
Mainly in plumbing and heating systems. They work for hot and cold water lines. You see them in industrial pipes, 化学輸送, and fire safety systems. They are good for repairs or new projects.

What safety steps are important during installation?
Always follow the manufacturer’s guide. Wear protective gloves and glasses. Make sure pipes are clean and dry. Check the electrofusion machine settings. Do not move pipes during cooling. Test the joint after installation.

(ポリプロピレン電融カプラ電融 PPR 継手)