פּע רער ווס פּווק רער אין אַגריקולטוראַל יראַגיישאַן: קאָמפּאַראַטיווע אַנאַליסיס

מיט די ינקריסינג פאָדערונג פֿאַר עפעקטיוו וואַסער שפּאָרן אין מאָדערן אַגריקולטורע, די וויסנשאפטלעכע פּלאַן פון יראַגיישאַן סיסטעם און די סעלעקציע פון ​​רערנ - ליניע מאַטעריאַלס האָבן ווערן דער שליסל. As the core components of agricultural irrigation, פּע (פּאַליעטאַלין) פּייפּס and PVC (פּאָליוויניל קלאָרייד) pipes are widely used because of their performance advantages. This paper will deeply analyze the specific application scenarios, specifications and selection suggestions of the two materials in agricultural irrigation, to help users optimize the design of irrigation system.

PE Pipe in Agricultural Irrigation Applicationס & פּarameters

Due to its flexibility, corrosion resistance and low temperature resistance, פּע פּייפּס are widely used in the following scenarios:

Drip irrigation systems: PE pipes can achieve precise irrigation through microholes or drippers, especially suitable for cash crops such as fruit trees and vegetables.

Mobile sprinkler irrigation: The lightweight PE pipe is easy to disassemble and assemble, suitable for seasonal irrigation or temporary water supply needs.

Buried underground irrigation: PE pipe is resistant to soil chemical corrosion, suitable for long-term buried use, reduce the risk of pipeline aging.

Hilly and complex terrain: its flexibility can adapt to terrain fluctuations, reduce the use of connectors, reduce the probability of water leakage.

פּע רער אין אַגריקולטוראַל יראַגיישאַן שספּעסיפיקאַטיאָנס &מodels

PE pipe specifications commonly used in agricultural irrigation are divided according to pressure grade and pipe diameter:

Pressure rating: PN6 (0.6מפּאַ), PN8 (0.8מפּאַ), PN10 (1.0מפּאַ), suitable for scenarios with different water pressure requirements.

Pipe diameter range: DN16mm to DN315mm, of which DN50mm-DN160mm is the mainstream model for agricultural irrigation.

Standard reference: in line with GB/T 13663.2-2018 “פּאַליעטאַלין (פּע) pipe system for water supply” נאָרמאַל, to ensure pressure resistance and environmental protection performance.

Advantages of PE Pipe in Agricultural Irrigation

נידעריק טעמפּעראַטור קעגנשטעל (-20℃~40℃), suitable for cold areas.

Flexible and easy to lay, low construction cost.

Strong impact resistance and service life of up to 50 יאָרן.

פּווק פּipe in אgricultural איךrrigation Application & פּarameters

פּווק רער is known for its high strength and low cost, and is mainly used in:

Trunk water pipeline: The rigid structure is suitable for long distance and large flow water transmission, such as the laying of the main pipe from the reservoir to the field.

Fixed sprinkler irrigation system: through flange or adhesive connection, high stability, suitable for large-scale farmland.

Open channel replacement project: PVC pipe can replace the traditional earth channel, reduce leakage, improve the efficiency of water transmission.

Irrigation inside the greenhouse: גלאַט ייבערפלאַך, ניט גרינג צו וואָג, suitable for humidity control needs in the greenhouse.

פּווק פּipe in אgricultural איךrrigation ספּעסאַפאַקיישאַנז & מodels

PVC pipe for agricultural irrigation should meet the following parameter standards:

Nominal pressure: 0.6מפּאַ, 0.8מפּאַ, 1.0מפּאַ, corresponding to different wall thicknesses (such as Φ110mm pipe wall thickness of 3.2mm-4.2mm).

Pipe diameter range: DN20mm to DN400mm, of which DN90mm-DN200mm is the common model.

Execution standard: in accordance with GB/T 13664-2006 “Hard polyvinyl chloride (פּווק-ו) pipe for Low pressure irrigation”, to ensure pressure resistance and durability.

אdvantages פון פּווק פּipe in אgricultural איךrrigation

High rigidity, suitable for ground fixed laying.

The cost is lower than PE tube, and the economy is outstanding.

Good high temperature resistance (working temperature 0℃~45℃).

פּע Pipes Vs פּווק רערס גomparative אnalysis

Selection suggestions:

– Terrain complex or low temperature environment: PE pipe is preferred.

– Long distance fixed water delivery: PVC piping is recommended to control costs.

– Drip irrigation/sprinkler irrigation system: Depending on budget and maintenance conditions, PE pipe is suitable for long-term use, PVC pipe is suitable for short-term projects.

PE pipe and PVC pipe have their own advantages in agricultural irrigation, and users need to scientifically select them according to the specific terrain, budget and maintenance conditions. ווי אַ פאַכמאַן רער פאַבריקאַנט, we provide high-quality PE/PVC irrigation pipes that meet national standards, support customized specifications and services, and help the global agriculture to achieve efficient water conservation goals.

סאַפּלייער

Luoyang Datang Energy Tech Co., לטד. איז אַ לידינג כינעזיש פאַבריקאַנט וואָס ספּעשאַלייזיז אין הויך-קוואַליטעט פּלאַסטיק פּייפּס און פיטינגז. יקוויפּט מיט שטאַט-פון-דעם-קונסט אָטאַמייטיד פּראָדוקציע שורות און געשטיצט דורך אַ קאָלעקטיוו פון 200 פּראָפעססיאָנאַלס, מיר פאָרשלאָגן אַ ברייט פּראָדוקט שורה מיט איבער 150 types of plastic pipes and fittings designed for water supply and drainage systems, גאַז טראַנסמיסיע, און שטאָק באַהיצונג סיסטעמען. אונדזער הויפּט פּראָדוקטן אַרייַננעמען פּווק פּייפּס און פיטינגז, פּע (HDPE) פּייפּס און פיטינגז, PPR פּייפּס און פיטינגז, און PEX פלאָר באַהיצונג פּייפּס.

Should you have any inquiries regarding PVC Pipe & פּע רער אין אַגריקולטוראַל יראַגיישאַן, ביטע טאָן ניט קווענקלען צו קאָנטאַקט אונדז!

טעל .:0086-183 3790 0677

וועטשאַט: 0086-183 3790 0677

ווהאַצאַפּפּ: 0086-183 3790 0677

בליצפּאָסט: sales@pipesandfittings.net