LUOYANG DATANG ENERGY TECH CO.,LTD

News

HDPE Pipe Weight Per Meter: How to Check Pipe Weight Before Ordering
You’ve just received two HDPE pipe quotations. The outer diameter looks the same. The SDR rating appears identical. Yet one supplier quotes a weight that’s 15% heavier than the other. Which one…

HDPE Pipes and Fittings: How to Match Pipe, Fittings and Connections
You ordered the right pipe. The diameter matches the drawing. The material grade is PE100. The SDR is correct. Then the pipe arrives on site, and the fittings don’t fit. It happens…

Why Are HDPE Pipe Prices Different? A Buyer’s Guide to Cost Factors
You send the same inquiry to three HDPE pipe suppliers. Same DN110, same PE100, same HDPE pipe. You get back three quotes — and they’re hundreds of dollars apart. This is the…

Ordering HDPE Pipe? 10 Details to Put in Your RFQ
Don’t Send Only “I Need 5,000 Meters of HDPE Pipe” “Please quote 5,000 meters of HDPE pipe.” If you’ve been in the pipe trading business long enough, you’ve seen this message dozens…

How to Specify Brass Hose Fittings for a Purchase Order
“Please quote 1/2-inch brass hose fittings, 2,000 pcs.” It sounds like a complete request. It isn’t. A supplier reading that line has no idea whether 1/2 inch refers to hose ID, barb…

Brass Hose Barb Sizes Explained: How to Match Barb Size to Hose ID
Your hose is labeled 1/2 inch. You find a 1/2-inch brass hose barb. It sounds like an obvious match — until you try to push the hose over the barb. The hose…

What Does “1/2 Inch” Actually Mean on a Brass Hose Fitting?
You find a brass hose fitting marked “1/2 inch.” You grab a caliper and measure it. The number on the display is not 0.500″. So, is the fitting mislabeled? Not necessarily. The…

What Makes a Brass Hose Fitting Leak? 7 Common Causes
You tighten the fitting. The hose looks secure. Everything seems fine — until you see a small drop of water forming at the connection, hear air hissing out of a pneumatic line,…

Can Brass Hose Fittings Handle Water, Air and Fuel?
A fitting may look like a simple brass connector. But once you put water, compressed air or fuel through the line, the requirements change — sometimes dramatically. Brass hose fittings are among…

Brass Hose Barb vs Threaded Fitting: Which One Is Right for Your Hose?
You have a flexible hose in hand, but the fitting options seem confusing. Should you push the hose over a barb? Connect it to a threaded fitting? Or use something that combines…

3/4″ GHT vs 3/4″ NPT: Why Are These Brass Hose Fittings Not Interchangeable?
You have a 3/4-inch brass fitting in your hand. The other connection is also marked “3/4 inch.” So why won’t they screw together? If you’ve ever stood in a workshop holding two…

Brass Hose Fitting vs Brass Pipe Fitting: What’s the Difference?
You need a brass fitting. You search online. You find hundreds of results — brass hose fittings, brass pipe fittings, brass adapters — and half of them look almost identical in the…
