LUOYANG DATANG ENERGY TECH CO.,LTD

News

How Much Weight Can a Pipe Clamp Hold? Understanding Load Capacity and Support Conditions
Two pipe clamps of the same nominal size can carry very different loads. One might be rated for a few hundred pounds; another, built with a heavier body and additional bolts, can…

Stainless Steel vs. Carbon Steel Pipe Clamps: Which Material Should You Specify?
Two pipe clamps can look almost identical on a warehouse shelf. Same profile, same bore, same bolt pattern. But once the installation leaves the warehouse — into a coastal plant, a chemical…

What Makes U-Bolt Pipe Clamps Different? Structure, Fit and Practical Uses
The Clamp That Does One Thing—and Does It Differently Pipe supports are not a single product category with interchangeable parts. Some grips wrap both halves of a pipe; some hang it from…

How to Choose the Right Pipe Clamp Size? A Practical Guide to Pipe Diameter and Fit
Choosing the right pipe clamp size is not as simple as matching the clamp to the pipe’s nominal label. A clamp that is too small may refuse to close; one that is…

How to Choose the Right Unistrut Clamp for Your Pipe Support System
The same pipe. The same strut channel. Two installations six months apart: one is rock-solid, the other has already loosened, vibrated, or started to corrode at the contact point. The difference is…

Pipe Clamps, Clevis Hangers or Pipe Brackets? How to Choose the Right Pipe Support
A pipe that moves, vibrates or sags is not just annoying—it puts stress on joints, fittings and the structure itself. Pipe clamps, clevis hangers and pipe brackets all hold pipes in place,…

Which Pipe Wrench Works Best for Your Job? Types, Sizes and Uses Compared
A pipe wrench may look like a simple hand tool, but choosing the wrong type or size can make pipe installation and maintenance more difficult than necessary. Whether you are tightening threaded…

PE Gas Pipe Pressure Testing: Strength vs. Tightness
A PE100 SDR11 gas pipe can leave the factory with a perfect hydrostatic test record—no failure at 20°C, 100h, 12.0 MPa hoop stress—and still fail on site. Not because the pipe was…

ISO 4437-1:2026 Is Here: What Changed for PE Gas Pipe Buyers and Installers
ISO 4437-1:2026 was published on 14 October 2026. It is the third edition, and it cancels and replaces ISO 4437-1:2024 with a technical revision—not a reprint with a new cover. The headline…

Why Metal Detectors Miss Buried PE Gas Pipes — and What Actually Finds Them
A field guide to tracer wire, radar, acoustics, and the locating methods that work after backfill 6 min read · 5 locating methods compared · for excavation, O&M, and gas utility technical…

Cold Welds Pass the Tightness Test. That’s Why They Leak Six Months Later.
One line before we start:The tightness test asks “does it leak now?” It does not ask “is the interface fused?”A joint can pass the first and fail the second. 1. Friday Afternoon,…

Can PEX Pipe Be Used Outdoors? UV Exposure, Storage, and Installation Limits
If you have ever uncoiled PEX pipe on a sunny job site, the question is practical: can it stay there? The short answer is no for permanent, unprotected outdoor sunlight exposure, but…
